Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

A slick coating on these rolls prevents debris from accumulating on the abrasive surface and keeps operating temperatures low.

The long sides of these sponges are angled to get into corners and edges that a flat sponge might miss.

A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface. These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.

Use these rolls to create consistent finishes on hard metals such as stainless steel, iron, and nickel.

Cut the length you need, then quickly attach, remove, and reuse.

Press onto a compatible sanding tool or backup pad; peel off to remove.

Holes allow dust removal when used with a vacuum sander.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Holes allow dust removal when used with a vacuum sander.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

A special fastener on the back of these discs allows you to easily swap one disc for another.

Smooth or shape work surfaces. Good for general purpose sanding, the aluminum oxide abrasive on these belts is tough and won’t crack under stress.

Multiple layers of abrasive arranged in a pattern create highly consistent finishes.

Create finer and more consistent finishes—these belts have a cushioned layer that creates more even sanding pressure on your workpiece.

Shape, debur, and sand edges and internal surfaces.

As the outer layer wears away, new abrasive is exposed.

Secure the shank into the collet or chuck of your tool.

The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

The backing cushions the abrasive to prevent gouging your work surface.