We will reply to your message within an hour.
More
Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.
Keep sanding sheets of various grits on hand.
A selection of 40 emery and crocus sanding sheets are included in these assortments.
The grit particles are block shaped and cut slowly to produce a polished surface on metals.
Create smooth finishes on wood with these garnet sheets.
The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.
These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
Keep a variety of grits on hand, so you always have the right one for the job. These sheets won’t deteriorate when used wet or with grease, chemicals, cutting fluids, and other solvents.
Keep an assortment of sheets that prevent dust and debris from building up on the abrasive surface close at hand.
A coating prevents dust and debris from building up on the abrasive surface.
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.
The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.
The thick, abrasive-embedded nylon mesh construction flexes to compensate for uneven pressure as you sand, producing a consistent finish.
With sheets in various grits, these assortments help you sand material to your desired finish. Coated in resin, these sheets are slow to degrade when used with water, grease, cutting fluids, or other chemicals.
A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface. These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
Keep a variety of grits on hand, so you can get the finish you need. You won’t have to worry about these sanding sheets getting clogged or deteriorating when used wet.
These sheets have a long lasting diamond abrasive.
Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.
Quickly attach, remove, and reuse.
Cut to convenient sizes and shapes, these fit most sheet sanders.
Sharper than silicon carbide and harder than ceramic alumina, the diamond abrasive on these sheets is ideal for sanding concrete, fiberglass, and other tough materials.
Peel and stick to your file handle. When it’s time to change the sheet, peel it off.
These sheets have a long-lasting diamond abrasive.
Use these sheets with an oscillating tool—their triangular shape reaches into tight corners and spaces. With hook and loop backing you can quickly attach, remove, and reuse them with a compatible backup pad.
Quickly switch between different grits—these sanding sheets attach and detach from a compatible sanding block with hook and loop.
Use these sheets with pole sanders.
The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.
Quickly attach, remove, and reuse these hook-and-loop sheets with pole sanders.
A good alternative to metal wool, nylon is waterproof and won’t rust, splinter, or shed.
Use steel wool for a range of surface preparation tasks, from removing paint and rust to polishing for a fine finish.
Keep various grades of steel wool pads on hand.
Unlike steel wool, this wool won’t leave behind small fibers that cause rust. Use on stainless steel.
Good for use on bronze and hard woods, this wool won't leave behind small fibers that cause rust.
Lighter and softer than other corrosion-resistant metal wools, aluminum also won't leave behind small fibers that cause rust. This wool is good for cleaning and finishing aluminum.
Diamond cuts more quickly, lasts longer, and leaves a finer finish than other lapping grains.
Lap without the mess of pastes and slurries—abrasive is embedded in the surface of this waterproof film.