We will reply to your message within an hour.
More
Secure the shank into the collet or chuck of your tool.
The premium abrasive stays sharp longer.
Various sizes and grits of flap sanding wheels are included in these assortments. Secure the shank into the collet or chuck of your tool.
The flaps are slit into narrow strips to provide more flexibility than other flap wheels.
An additive in the abrasive resists heat.
The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
A coating prevents dust and debris from building up on the abrasive surface.
These assortments include various sizes and grits of flap sanding wheels. The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.
The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.
Fit these wheels over your tool's arbor. The flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces.
With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.
Polish, clean, and debur deep inside tubes and cylinders.
Assortments include a selection of flap wheels to polish, clean, and deburr deep inside tubes and cylinders.
With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap wheels.
With more flaps than standard discs, these last 30-40% longer.
Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.
These discs have a harder abrasive than standard flap sanding discs.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating more consistent finishes.
A heavy duty backing plate provides more support than standard discs for heavy material removal.
The flaps alternate between an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.
The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.
These discs have a harder abrasive than standard flap sanding discs for corners.
Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.
The flaps wrap around the outer edge of these discs to sand welds at right angles.
The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.
Set at an angle and widely spaced, the flaps reach into corners.
Debur, clean, and blend faster than other nylon mesh discs.
Thicker, more pliable, and less aggressive than standard nylon mesh quick-change discs, use these for finer sanding on curved surfaces.
The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.
A special fastener on the back of these discs allows you to easily swap one disc for another.
These discs have a harder abrasive than standard quick-change discs.
The heavy duty construction provides more support than standard discs for heavy material removal.
These discs have a harder abrasive than standard flexible-edge quick-change discs.
The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.
Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.
These discs have a long-lasting diamond abrasive.
Used for stripping, these discs eliminate discoloration from heat buildup.
Fit these discs over your tool’s arbor to sand stainless steel and hard metals.
The premium abrasive stays sharp longer. Holes in the disc let you see the surface you’re sanding.
Fit these discs over your tool's arbor.
Holes in the disc let you see the surface you’re sanding.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Fit these discs over your tool's arbor to sand masonry, ceramics, and composites.
Fit these discs over your tool's arbor to sand aluminum, soft metals, and nonmetals.
Press onto a compatible sanding tool or backup pad; peel off to remove.
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Holes allow dust removal when used with a vacuum sander.
The thick, abrasive-embedded nylon mesh construction gives you maximum control over sanding pressure.
These discs are abrasive-embedded cloth with a cushioned layer.
Made of foam, these discs can conform to contoured shapes, corners, and sharp edges.
Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.
The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.
The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.
Use with commercial floor buffing machines to sand wood floors and strip tape from concrete.
Use these discs with commercial floor buffing machines to sand wood floors.
Slip a cap onto the head of a shank and sand small, recessed, and hard-to-reach areas.
Choose a bit with the same angle as your countersink to debur the inside of the hole.
Serrations on the wheel prevent heat buildup, allowing for fast, aggressive sanding and long belt life.
Made of foam, these blocks flex to sand around curves.
These rubber blocks sand flat surfaces.
Use these wheels for light grinding, deburring, and sharpening.
Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.
The silicon carbide abrasive in these wheels is suspended in rubber for a cushioned grind with light material removal.
The perforated honeycomb pattern cuts carbide, ceramics, and glass without the need for cleaning.
Multiple layers of nylon mesh embedded with abrasive provide a cushioned grind. Also known as unitized discs or wheels.
Heat-dissipating holes reduce material buildup and extend the life of the wheel. Wheels have a semiflexible backing that conforms to curved and rough surfaces.
A blend of ceramic alumina and zirconia alumina removes material at a 50% faster rate than our Long-Life Grinding Wheels. Wheels are also known as Type 27 wheels, raised-hub wheels, and grinding discs.
Made with reinforced aluminum oxide, these wheels are designed for light grinding, cutting, and notching in steel pipelines.
The absence of iron, sulfur, and chlorine in these wheels means they won’t corrode or discolor stainless steel. They are also known as INOX wheels, Type 27 wheels, raised-hub wheels, and grinding discs.
Made with aluminum oxide in a diamond pattern, these flexible wheels remove mill scale from metal, including pipe, in a single step.
Wheels are a blend of aluminum oxide and zirconia alumina, which removes more material and lasts three times as long as our General Purpose Grinding Wheels. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.
Bonded without any wax or rubber filler, these wheels resist material buildup. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.
The flexible backing on these wheels conforms to curved and rough surfaces.
A good value for everyday use, these wheels offer an economical balance between heavy material removal and long life. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.
A large grinding surface, combined with a thick layer of rough abrasive removes more material than other wheels. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.
A blend of cotton laminate and aluminum oxide creates a smoother surface than other grinding wheels with similar grits. Wheels are also known as Type 27 wheels and raised-hub wheels.
The saucer shape lets you hold these wheels at shallower angles than Type 27 wheels, so they’re more comfortable to handle. They are also known as Type 28 wheels and raised-hub wheels.
Silicon carbide cuts through concrete and stone without generating much heat. Wheels are also known as Type 27 wheels, raised-hub wheels, and grinding discs.
Wheels have a large surface area and a thick layer of rough abrasive for heavy material removal on concrete and stone. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.
Grind a variety of materials, such as metal, fiberglass, and ceramics. Also known as (AVOS) Type 29 wheels, they have an upside-down dish shape for a large contact area.
Use on 7" and 9" angle grinders and sanders to remove paint, rust, and scale from hard surfaces.
Quickly remove vinyl, decals, tape, and double-sided molding striping and trim without damaging the surface below.
Use these wheels for heavy material removal in one spot or along a weld seam. They are also known as Type 1 wheels and snagging wheels.
A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits.
Wheels remove more material than other grinding wheels with cotton laminate.
The special shapes of these wheels provide more clearance than typical straight wheels.
The porous bond leaves more space between abrasive grains so heavy amounts of chips and coolant easily flow through.
Typically used with cylindrical, surface, and ID grinders, these wheels are specially designed to grind the inside diameter of workpieces.
Unlike aluminum oxide wheels, these silicon carbide wheels won’t clog when grinding soft metals.
Made with boron nitride, second in hardness to diamond, these wheels are highly wear resistant and easily cut difficult-to-grind steel parts.
A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.
Use these wheels for precision grinding on surface, cylindrical, and tool and cutter grinders. They are also known as Type 1 wheels and straight wheels.
Remove material and shape metal cylindrical forms or parts without the need for centers or fixtures.
A nickel-coated diamond grit and synthetic resin bond make these wheels extremely hard and wear resistant.
A single point removes more material than cleaners with multiple points.
A concentrated amount of diamond abrasive produces a finer finish than other multiple-point cleaners.
Furnished with multiple points, these clean faster and leave a more uniform finish than single-point cleaners.
Mount these cleaners to the T-slot of your surface grinder or secure them to a magnetic chuck.
Use to clean or create rounded shapes on the wheel surface.
The larger face offers better control, while multiple points provide a finer finish than single-point cleaners.
The single point on these cleaners removes more material than multiple-point cleaners.
Twist the knurled adjustment knob on these cleaners to advance the replaceable point.
Also known as dressing sticks, these can be used to sharpen a variety of abrasive wheels.
Also known as hooded dressers, these cleaners reveal new layers of sharp abrasive and deflect flying chips.
Reshape worn grinding wheels so they’ll continue to run straight by holding these truing sticks against the wheels as they turn.
Mount these truing cleaners to a T-slot to reshape worn diamond and CBN grinding wheels.
Cleaners maintain a consistent speed for minimal diamond loss. Use to reshape worn diamond and CBN grinding wheels.
Grind flat stock and flat surfaces with these segments.
Use sanding belts on your grinder. As the wheel rotates, the rubber tire expands and holds the belt in place.
Use sanding belts on your grinder. Slip your belt onto the rubber tire and inflate to the desired hardness.
Convert your threaded grinder spindle into a 5/8"-11 size that's compatible with common grinding wheels and sanding discs.
Secure the shank into the collet or chuck of your tool. Attach the quick-change fastener on the sanding disc to the corresponding fastener on the backup pad.
The flexible edge of the sanding disc overhangs these backup pads.
Thread these pads onto the tool’s arbor.
Designed to rotate independently of the disc, these pads clear material buildup on the abrasive surface for longer disc life.
These pads are designed to channel air flow to the sanding disc for cooler operation, prolonging the life of the disc.
Thread one of these backup pads onto the tool’s arbor, then attach a sanding disc and secure with the disc nut.
Holes in the pad align with holes in the sanding disc for a clearer view of the sanding surface.
Secure the shank into the collet or chuck of a tool.
Thread the stud into the tool's spindle and then press the sanding disc onto the backup pad.
Use screws to attach these pads to a tool.
Mount one of these pads onto the tool's arbor.
Thread the stud into the tool's spindle.
Swap between hook-and-loop and adhesive-backed sanding discs on one sander. Rather than replace your entire sanding pad, mount these adapters to create a hook-and-loop or adhesive-backed attachment.