A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface. These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. They have abrasive on both sides and can be cut to length.

For technical drawings and 3-D models, click on a part number.

Cut the length you need, then quickly attach, remove, and reuse. These rolls have a coating that prevents dust and debris from building up on the abrasive surface.

Holes allow dust removal when used with a vacuum sander to prevent buildup of debris on the abrasive surface. Cut these rolls to the size you need or tear them at the perforated lines every 2 ¾”—with dozens of small holes, they can be used with any style of vacuum sander, regardless of its hole configuration. Hook and loop lets you quickly attach, remove, and reuse this material. Ceramic alumina grit continually fractures to produce new, sharp cutting edges. It's sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly. It sands faster and lasts longer than aluminum oxide but requires more force to abrade properly.

For technical drawings and 3-D models, click on a part number.

As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter or tapered spindle with a shank is required (both sold separately). The most common abrasive material, aluminum oxide is hard enough to sand steel and wood. The diameter listed is for the large end of the roll.

Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.

Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes.

Cone rolls are for use in holes. Unlike tapered rolls, they have a flat surface to allow for a more even finish within internal surfaces.

The premium abrasive stays sharp longer. Use these rolls in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter is required (sold separately).

Change your sanding rolls less often and produce a more consistent finish compared to standard sanding rolls. The secure bond of the roll to the integrated shank prevents loosening from vibration while sanding, resulting in a smooth finish. Great for precision grinding applications when you need to sand your surface to a specific tolerance. Use these rolls in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls.

Zirconia alumina grit continually fractures to produce new, sharp cutting edges. This abrasive is great for aggressively removing material from steel and wood, and it lasts longer than aluminum oxide.

For technical drawings and 3-D models, click on a part number.