About Sanding Abrasives
More
Sanding Rolls
These rolls are coated with aluminum oxide, which is the most common abrasive material and hard enough to sand steel and wood. Rolls can be cut to length.
| Wd. | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Includes | Grit | 30 ft. | 75 ft. | 150 ft. | |
For Rough Finish | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/2" | Steel, Wood | Aluminum Oxide | Cloth | Tear Resistant | __ | 50 | 00000000 | |||
| 1" | Steel, Wood | Aluminum Oxide | Cloth | Tear Resistant | Dispenser | 50 | 00000000 | |||
| 1 1/2" | Steel, Wood | Aluminum Oxide | Cloth | Tear Resistant | Dispenser | 50 | 00000000 | |||
| 2" | Steel, Wood | Aluminum Oxide | Cloth | Tear Resistant | Dispenser | 50 | 00000000 | |||
| 2 1/2" | Steel, Wood | Aluminum Oxide | Cloth | Tear Resistant | __ | 50 | 00000000 | |||
Water-Resistant Sanding Rolls
These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. They can be cut to length. Aluminum oxide is the most common abrasive, hard enough to sand steel and wood. To achieve uniform, close-tolerance finishes on your work surface, choose a roll with a listed micron grade.
Cloth backing resists tearing and can withstand continual bending.
Not all grits are available in all lengths.
For technical drawings and 3-D models, click on a part number.
Spiral-Wound Sanding Rolls
As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter or tapered spindle with a shank is required (both sold separately). The most common abrasive material, aluminum oxide is hard enough to sand steel and wood. The diameter listed is for the large end of the roll.
Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.
Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes.
| Dia. | Lg. | Arbor Hole Dia. | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
Straight Rolls | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Rough Finish | |||||||||||
| 1/4" | 1" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 25 | 00000000 | 00000 |
| 1/4" | 1 1/2" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 25 | 00000000 | 00000 |
| 5/16" | 1" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 25 | 00000000 | 00000 |
| 5/16" | 1 1/2" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 25 | 00000000 | 00000 |
| 3/8" | 1" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 25 | 00000000 | 00000 |
| 3/8" | 1 1/2" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 25 | 00000000 | 00000 |
| 1/2" | 3/4" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 25 | 00000000 | 00000 |
| 1/2" | 1" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 25 | 00000000 | 00000 |
| 1/2" | 1 1/2" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 25 | 00000000 | 00000 |
| 5/8" | 1" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 0000 |
| 5/8" | 1 1/2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 5/8" | 2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 3/4" | 1" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 3/4" | 1 1/2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 3/4" | 2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 1" | 1" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 1" | 1 1/2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 1" | 2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 5 | 00000000 | 00000 |
Tapered Rolls | |||||||||||
For Rough Finish | |||||||||||
| 3/8" | 1" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 25 | 00000000 | 00000 |
| 3/8" | 1 1/2" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 25 | 00000000 | 00000 |
| 1/2" | 1" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 25 | 00000000 | 00000 |
| 1/2" | 1 1/2" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 5/8" | 1" | 1/8" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 5/8" | 1 1/2" | 1/8" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 3/4" | 1 1/2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 3/4" | 2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 7/8" | 1 1/2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 1" | 1" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 1" | 1 1/2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| 1" | 2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 50 | 10 | 00000000 | 00000 |
| Shank Dia. | Overall Lg. | Each | |
For 3/4" and 1" Lg. Rolls with 1/8" Arbor Hole Dia. | |||
|---|---|---|---|
| 1/8" | 2 3/4" | 0000000 | 00000 |
| 1/4" | 2 1/2" | 0000000 | 0000 |
| 1/4" | 4" | 0000000 | 0000 |
| 1/4" | 6" | 0000000 | 0000 |
For 3/4" and 1" Lg. Rolls with 3/16" Arbor Hole Dia. | |||
| 1/4" | 2 3/4" | 0000000 | 0000 |
For 1 1/2" Lg. Rolls with 1/8" Arbor Hole Dia. | |||
| 1/8" | 3" | 0000000 | 0000 |
| 1/4" | 2 3/4" | 0000000 | 0000 |
| 1/4" | 4" | 0000000 | 0000 |
| 1/4" | 6" | 0000000 | 0000 |
For 1 1/2" Lg. Rolls with 3/16" Arbor Hole Dia. | |||
| 1/4" | 3" | 0000000 | 0000 |
For 2" Lg. Rolls with 3/16" Arbor Hole Dia. | |||
| 1/4" | 3 1/2" | 0000000 | 0000 |
Long-Life Spiral-Wound Sanding Rolls
The premium abrasive stays sharp longer. Use these rolls in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter is required (sold separately).
| Dia. | Lg. | Arbor Hole Dia. | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | For Use On | For Use With | Pkg. Qty. | Choose a Grit | Pkg. | |
For Rough Finish | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 1" | 1/8" | 26,000 | Zirconia Alumina | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 0000000 | 000000 |
| 1/2" | 1 1/2" | 1/8" | 26,000 | Zirconia Alumina | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 0000000 | 00000 |
| 5/8" | 1" | 3/16" | 18,000 | Zirconia Alumina | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 0000000 | 00000 |
| 5/8" | 1 1/2" | 3/16" | 18,000 | Zirconia Alumina | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 0000000 | 00000 |
| 3/4" | 1" | 3/16" | 18,000 | Zirconia Alumina | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 0000000 | 00000 | |
| 3/4" | 1 1/2" | 3/16" | 18,000 | Zirconia Alumina | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 0000000 | 00000 |
| Shank Dia. | Overall Lg. | Each | |
For 3/4" and 1" Lg. Rolls with 1/8" Arbor Hole Dia. | |||
|---|---|---|---|
| 1/8" | 2 3/4" | 0000000 | 00000 |
| 1/4" | 2 1/2" | 0000000 | 0000 |
| 1/4" | 4" | 0000000 | 0000 |
| 1/4" | 6" | 0000000 | 0000 |
For 3/4" and 1" Lg. Rolls with 3/16" Arbor Hole Dia. | |||
| 1/4" | 2 3/4" | 0000000 | 0000 |
For 1 1/2" Lg. Rolls with 1/8" Arbor Hole Dia. | |||
| 1/8" | 3" | 0000000 | 0000 |
| 1/4" | 2 3/4" | 0000000 | 0000 |
| 1/4" | 4" | 0000000 | 0000 |
| 1/4" | 6" | 0000000 | 0000 |
For 1 1/2" Lg. Rolls with 3/16" Arbor Hole Dia. | |||
| 1/4" | 3" | 0000000 | 0000 |