These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. They can be cut to length. Aluminum oxide is the most common abrasive, hard enough to sand steel and wood. To achieve uniform, close-tolerance finishes on your work surface, choose a roll with a listed micron grade.

Cloth backing resists tearing and can withstand continual bending.

Plastic film backing resists tearing and bends like cloth, plus it has a high-friction coating to prevent slipping on the work surface—particularly good while wet sanding.

Not all grits are available in all lengths.

For technical drawings and 3-D models, click on a part number.

A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface. These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. They have abrasive on both sides and can be cut to length.

For technical drawings and 3-D models, click on a part number.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

One of the sharpest abrasives, the silicon carbide on these rolls sands aluminum, copper, plastic, and rubber with ease, generating minimal heat to prevent material buildup. Cut the length you need and stick it on your sanding tool. When it’s time to change the sheet, peel it off. The water-resistant material won’t deteriorate when used with water, cutting fluid, and other chemicals or solvents that may be present when sanding.

For technical drawings and 3-D models, click on a part number.

Cut the length you need, then quickly attach, remove, and reuse. These rolls have a coating that prevents dust and debris from building up on the abrasive surface.

As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter or tapered spindle with a shank is required (both sold separately). The most common abrasive material, aluminum oxide is hard enough to sand steel and wood. The diameter listed is for the large end of the roll.

Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.

Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes.

The secure bond of the roll to the integrated shank prevents loosening from vibration while sanding, resulting in a smooth finish. Great for precision grinding applications when you need to sand your surface to a specific tolerance. Use these rolls in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls.

The most common abrasive material, aluminum oxide is hard enough to sand steel and wood. It costs less than zirconia alumina but wears down faster.

For technical drawings and 3-D models, click on a part number.