These belts resist deterioration when used with water or cutting fluids. The most common abrasive material, aluminum oxide is hard enough to sand steel and wood. It costs less than zirconia alumina but wears down faster. Click on a part number to view the volume discount (if applicable).

Also Available: Other belt sizes and grits. Please ask for 4713A999 and specify belt size and grit.

Avoid clogs when you're removing paint or rust. The widely spaced grains on these belts give dust and debris a place to collect so they won't build up on the belt’s surface. They use aluminum oxide, the most common abrasive for general sanding. It’s tough and won’t crack under high stress. With a cloth backing, these belts are flexible yet resistant to tearing.

Multiple layers of abrasive arranged in a pattern create highly consistent finishes. The most common abrasive for general sanding, aluminum oxide is tough and won’t crack under high stress. Use these belts for removing paint and rust to final finishing. A cloth backing makes these belts flexible yet resistant to tearing.

Like tank treads, these belts have wide gaps to collect and channel away debris as they turn. Multiple layers of abrasive arranged in a brick pattern create highly consistent finishes. The layers contain up to four times as much abrasive material as other sanding belts, so they last longer.

The most common abrasive material, aluminum oxide is hard enough to sand most materials. It costs less than zirconia alumina but wears down faster.