Water-Resistant Multifunction Chemistry Meters
Clean
Liquids
with Clean
and Dirty Liquids
Test different water-chemistry measurements in dirty, wet conditions. Often used in pools and spas, all of these meters are for use with clean liquids. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a calibration solution (not included) and the calibration button to maintain accuracy.
IP57 meters are protected from dust and temporary submersion in liquids.
IP65 meters are protected from dust and low-pressure jets of liquids.
Conductivity, salinity, and total dissolved solids (TDS) meters come with one sensor that takes all three chemistry measurements.
Conductivity and total dissolved solids (TDS) meters come with one sensor that takes both chemistry measurements. You can also use them in aquaculture solutions, wastewater, and other dirty liquids.
Import regulations restrict sales to the listed areas.
| Sensor Material | Automatic Temperature Compensation (ATC) Range, °F | Environmental Rating | Specifications Met | Batteries Included | Cannot Be Sold To | Each | |
For Use With Clean and Dirty Liquids | |||||||
|---|---|---|---|---|---|---|---|
| Nonglass | 32° F to 122° | IP65 | CE Marked | Yes | Canada | 0000000 | 000000 |
Remote-Reading Multifunction Chemistry Meters
Take multiple water-chemistry and temperature measurements in hard-to-reach places from up to 3 feet away. Often used in tap water and wastewater, these meters work in both clean and dirty liquids. Automatic temperature compensation standardizes readings to 77° F to prevent inaccurate results in changing temperatures. The data hold function freezes the current reading on the display. For easy viewing, temperature and chemistry measurements appear on the same screen. These meters are IP57 rated, so they resist dust and withstand temporary submersion. They cannot be sold to Canada due to import regulations.
To maintain their accuracy, all have a calibration button and some also come with calibration solutions.
Conductivity, salinity, temperature, and total dissolved solids (TDS) meters take four measurements at once. Conductivity measures the concentration of salts, nutrients, chemicals, and other substances. Salinity measures the amount of dissolved salts. TDS determines the contaminant levels. The stainless steel sensor is durable and resists breaking.
Conductivity | Salinity | Total Dissolved Solids (TDS) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Range | Accuracy | Range | Accuracy | Temp. Accuracy | Range | Accuracy | Automatic Temperature Compensation (ATC) Range, °F | Batteries Included | Cannot Be Sold To | Each | |
For Use With Clean and Dirty Liquids | |||||||||||
| 0 to 19.99 µS 20 to 199.9 µS 200 to 1,999 µS 2 to 19.99 mS 20 to 199.9 mS | ±1% ±1% ±1% ±1% ±1% | 0 to 100 ppt | ±1% | ±0.9° F | 0 to 0.1 ppm | ±1% | 32° F to 212° | Yes | Canada | 0000000 | 0000000 |
| For Testing | Each | |
| Conductivity, Salinity, Temperature, Total Dissolved Solids (TDS) | 0000000 | 0000000 |
Remote-Reading Multifunction Chemistry Meters with PC Output
Test temperature, chemical concentration, contamination, and salt levels in liquid from up to 6 ft. away, then send the results to your computer for analysis. These meters include a USB cable that transfers up to 1,000 readings. Often used to test water quality, they work on both clean and dirty liquids—from tap water to wastewater. Conductivity tests measure the concentration of salts, nutrients, chemicals, and other substances. Total dissolved solids (TDS) tests report contaminant levels. Salinity tests determine the salt levels in liquid. The sensor is made of stainless steel, so it’s durable and resists breaking. IP67 rated, these meters are dust tight and withstand temporary submersion.
To prevent inaccurate results from changing temperatures, these meters automatically standardize temperature readings at 77° F. Temperature readings appear on screen with other measurements, so you won’t have to scroll through multiple screens. A data hold function freezes the current reading on the display.
To maintain accuracy of the meters, they come with calibration solutions and have a calibration button.
These meters cannot be sold to Canada due to import regulations.
Conductivity | Resistivity | Salinity | Total Dissolved Solids (TDS) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Range | Accuracy | Range | Accuracy | Range | Accuracy | Temp. Accuracy | Range | Accuracy | Automatic Temperature Compensation (ATC) Range, °F | Batteries Included | Cannot Be Sold To | Each | |
For Use With Clean and Dirty Liquids | |||||||||||||
| 0 to 200 mS | ±1.5% | 0 to 20 megohms | ±1.5% | 0 to 100 ppt | ±1.5% | ±0.9° F | 0 to 100 ppt | ±0.1% | 32° to 212° | Yes | Canada | 00000000 | 0000000 |
| For Testing | Each | |
| Conductivity, Resistivity, Salinity, Temperature, Total Dissolved Solids (TDS) | 00000000 | 0000000 |
Water-Resistant Conductivity Meters
Don’t worry about dropping this meter in your tank when checking electrical conductivity—it floats and has a housing that meets IP67 for complete resistance to dust and protection from temporary submersion. For use with water, hydroponic solutions, and other clean liquids, this meter measures a liquid's conductivity to indicate the concentration of salts, nutrients, chemicals, and other substances. It displays temperature in addition to conductivity. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.
Import regulations restrict sales to the listed areas.
Meters | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Conductivity | Replacement Sensors | ||||||||||
| Sensor Material | Range | Accuracy | Automatic Temperature Compensation (ATC) Range, °F | Environmental Rating | Specifications Met | Batteries Included | Cannot Be Sold To | Each | Each | ||
For Use With Clean Liquids | |||||||||||
| 304 Stainless Steel | 0 to 1,999 µS | ±1.5% | 32°F to 122° | IP67 | CE Marked | Yes | Canada | 00000000 | 0000000 | 00000000 | 000000 |
Bench-Top Conductivity Meters
Pour contaminated water, wastewater, printing fountain solutions, and other dirty liquids into the meter cup to test electrical conductivity levels that indicate the concentration of salts, nutrients, chemicals, and other substances. These meters have automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration knob to maintain accuracy.
Conductivity | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Sensor Material | Range | Accuracy | Automatic Temperature Compensation (ATC) Range, ° F | Ht. | Wd. | Dp. | Batteries Included | Each | |
For Use With Dirty Liquids | |||||||||
| Nonglass | 0 to 0.5 µS 0 to 5 µS 0 to 50 µS 0 to 500 µS 0 to 5,000 µS | ±2% | 32° to 120° | 4" | 3 1/2" | 4 1/2" | Yes | 0000000 | 0000000 |
| Nonglass | 0 to 10 µS 0 to 100 µS 0 to 1,000 µS 0 to 10,000 µS | ±2% | 50° to 160° | 4" | 3 1/2" | 4 1/2" | Yes | 00000000 | 000000 |
| Optional Carrying Case | 0000000 | Each | 0000000 |
Sanitary Conductivity Sensors
Often used to save rinse water in beverage and pharmaceutical lines, these sensors test the amount of chemicals, cleaners, and other substances in liquids by measuring how well the liquid conducts electricity. They’re 3-A and European Hygienic Engineering and Design Group (EHEDG) certified, thanks to their design that’s easy to keep clean. Highly polished, they limit where bacteria could grow. They also withstand washdowns with hot water, chemicals, and cleaners common to sanitary lines because of their PEEK probe, stainless steel body, and IP ratings. Their IP ratings also mean they’re dust tight and won’t fail if briefly under water. All are FDA compliant to safely touch food.
These sensors work with 4-20 mA analog output to connect to remote displays and programmable logic controllers (PLCs), making them good for hard-to-reach areas and frequent application changes. This also means they’ll set off alarms and trigger cycles to start and stop in automated systems. With the touchscreen, program each color of the display to alert you to errors, completed cycles, and other events. Both the head and the display rotate to view readings from the best angle.
Highly accurate, these sensors test almost any liquid. They also measure temperature—no need for a separate sensor. To compare readings as temperature changes, they automatically standardize readings at 77° F. All meet European safety standards, since they’re CE marked.
Use quick-clamp adapters to connect these sensors to quick-clamp sanitary tube fittings.
Import regulations restrict sales to the listed areas.
For technical drawings and 3-D models, click on a part number.
Sensor | Conductivity | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., mm | Material | Dia., mm | Lg., mm | Range | Accuracy | Electrical Connection Type | Thread Type | Automatic Temp. Compensation (ATC) Range, °F | Environmental Rating | Specifications Met | Cannot Be Sold To | Each | |
For Use With Liquids | |||||||||||||
| 37 | PEEK Plastic | 3.6 | 26 | 0 to 1,000 mS 0 to 500 mS 0 to 500 µS | ±1.5% ±1% ±1.5% | Threaded M12 Plug (Two 4-Pole Connections) | BSPP | -4° to 302° | IP67, IP69K | 3-A Certified 74-07, CE Marked, EHEDG Certified, FDA Compliant 21 CFR 177.2415 | Canada | 0000000 | 000000000 |
| 60 | PEEK Plastic | 3.6 | 26 | 0 to 1,000 mS 0 to 500 mS 0 to 500 µS | ±1.5% ±1% ±1.5% | Threaded M12 Plug (Two 4-Pole Connections) | BSPP | -4° to 302° | IP67, IP69K | 3-A Certified 74-07, CE Marked, EHEDG Certified, FDA Compliant 21 CFR 177.2415 | Canada | 0000000 | 00000000 |
| Optional Quick-Clamp Adapter | 0000000 | Each | 0000000 |