Snap these switches onto your DIN rail to mount them. With a toggle switch and receptacle combined, you can actuate power and plug in devices from a single box.

A rubber seal protects these switches from splashing water.

Control equipment from up to 40 feet away—these switches include a transmitter and a receiver that connects to equipment.

Keep your hands free for other tasks by triggering switches with your foot.

Use this switch for intermittent, light-duty applications.

Rated NEMA 6P and IP68, these switches are protected against washdowns, corrosion, and temporary submersion.

The enclosure not only protects these switches, but also adds options for how you install them.

Prevent accidental actuation from bumps or vibration—these switches require you to grip and twist the lever to turn the switch. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Grip and twist a lever to turn these switches on or off—they’re designed to prevent accidental actuation. Install them into standard-sized panel cutouts.

Prevent accidental actuation from bumps or jostles—these switches require you grip and twist a lever to turn them on or off. Install them in 30 mm dia. cutouts.

Made for areas where ignitable gas and vapor may be present, these switches have a housing that seals in anything that could spark flammable material.

Connect these switches to a cable to control circuits from a distance. They're typically used to turn off production lines and material handling systems.

Tug on the cable anywhere along your line to immediately cut the flow of power. This multi-functional unit also sends a signal to restart machinery with the push of a button, doing the job of two units in one.

Control cranes and other mobile machinery in dirty, outdoor, and wet environments without damaging your switch.

Control machinery such as cranes, hoists, or trolleys with a wireless switch. About the size of a cell phone, these switches fit in the palm of your hand.

Use fingerprints to confirm the identity of personnel before granting access to secure areas or equipment.

Choose an actuator and contact block to make your own 22 mm plastic switch.

Choose an actuator and contact block to make your own 30 mm switch.

Alternate between two batteries without interrupting power.

To prevent accidental actuation and limit access to sensitive equipment, these switches require a key to turn circuits on or off. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Designed for use near ignitable gases, fibers, and dust, these switches have a housing that seals in anything that could ignite flammable material. They require a key to turn circuits on or off, preventing accidental activation and limiting access.

Rated NEMA 4 or IP66, these switches are protected from washdowns.

Mount these switches in an outlet box. Also known as palm-button switches, they have a large button that makes them easy to use even while wearing gloves.

Clip these switches onto nearby structures made from T-slotted framing to quickly cut power with the push of a button.

Immediately cut power with a single push.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications.

Mount these switches in panel cutouts where changing a battery or routing wires might be difficult—they power themselves when you push the button.

A quick push is all it takes to actuate these switches.

Actuate these switches with the push of a button. Their buttons are distinct colors to help you quickly spot switches without labels.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Save space in your setup—these switches double as handles on machines and equipment.

These narrow switches are also thin enough to be hidden under carpeting or installed anywhere space is limited.

Customize the length of these switches by cutting them from a 50-foot roll.

A lightweight yet durable alternative to stainless steel enclosed switches, these aluminum enclosed switches withstand corrosion, oil, and washdowns.

A protective plastic enclosure resists dents, chips, and cracks, so you can install these switches outside of panels.

Made of yellow polycarbonate plastic, these enclosed switches are easy to see and resist dents, chips, and cracks. They are more corrosion resistant than aluminum enclosed switches and withstand washdowns and oil/coolant spraying.