Thicker than standard antifatigue mats, these mats have more cushion for greater comfort.

Use these greaseproof mats where grease and oil are constantly present.

Thicker than our other wear-resistant antifatigue mats, these mats have more cushion for greater comfort.

These mats withstand occasional contact with grease.

Use these greaseproof mats where grease and oil are constantly present.

Rated for use in Fed. Spec. Class 100 and ISO Class 5 clean rooms, these mats release a low number of particles into the air.

Cushion where you stand without contaminating your line in food and pharmaceutical plants.

These general purpose mats provide a walking surface in wet environments that allows liquids to drain beneath your feet.

Use greaseproof mats where grease and oil are constantly present. They're treated to protect the mat against odors and degradation.

Rigid and lightweight, these polyethylene mats resist acids, salt, gasoline, solvents, and chemicals.

Use these greaseproof mats where grease and oil are constantly present.

Use these mats where drainage and slip resistance are a priority.

These mats meet NSF/ANSI standards for use in food-processing areas.

These mats provide good traction while protecting walkways, ramps, and other high-traffic areas.

With a coarse ceramic/garnet abrasive surface, these mats feel like walking on sandpaper, even in environments where moisture and grease are constantly present.

Tested to withstand the stated dielectric test voltage, these mats protect workers from electrical shock when working around high-voltage equipment.

Made of galvanized steel, these rust-resistant mats scrape off stubborn mud and snow.

Use these antistatic, static-dissipative, or conductive mats to prevent static discharge that can harm sensitive electronics and equipment.

These mats have an abrasive scraping surface and absorb water.

Get three zones of cleaning power in one convenient mat. Zone one is for aggressive scraping, zone two alternates stripes of scraping and drying, and zone three is for drying.

Use these mats to drain static that can harm sensitive equipment.

Gripping teeth on the bottom hold these mats in place on carpet.

Keep feet warm in cold, drafty rooms.

These mats are designed to absorb shock from falling objects and protect floors as well as equipment. They stand up to prolonged loads and are often used to store heavy industrial parts.

Decontaminate your shoes before entering clean environments. These mats have raised edges so they can be filled with disinfecting solution.

When these sticky mats get dirty, use the cleaner to restore the dirt-grabbing surface.

Often used in stairwells and hallways, these tiles have a raised-disc surface that provides traction and is easy to clean.

Thicker than standard safety switch mats, these withstand repeated impact from heavy and sharp objects.

Rated IP67 and NEMA 6, these switch mats withstand washdowns.

Customize the length of these switches by cutting them from a 25-foot roll.

Made with stainless steel conductors, these switches resist corrosion in damp areas. They’re less than 1/4” thick, so they’ll fit under floor mats and in other tight spaces.

Step or press anywhere along the switch to control doors, lights, or alarms.

Use in areas with light pedestrian traffic.

Lay your cable in the slit on the top so it stays off the floor.

Protect cable from carts, pedestrians, and other light indoor traffic.

With the widest channels of any of our cable ramps, these ramps can span large cable, hose, and pipe.