Add hazard symbols to an existing label or use alone to communicate hazards at a glance.

Identify hazards and unsafe practices that can injure workers around conveying equipment. These labels meet or exceed Conveyor Equipment Manufacturers Association standards and have headers that meet OSHA/ANSI standards for indicating hazards.

The headers and illustrations on these labels help workers identify electrical hazards at a glance.

Add electrical hazard symbols to an existing label or use alone to communicate hazards at a glance.

Wrap these labels around padlocks to comply with lockout/tagout procedures.

Prevent injuries from unexpected machine startups during maintenance and repair—these labels remind you to lock out equipment.

Provide appropriate code numbers for hazards with these NFPA (National Fire Protection Association) labels.

The color stripes and reference chart identify the type of hazard. Write in the appropriate code numbers and list required personal protective equipment.

Prevent health hazards resulting from exposure to chemicals using the UN classification.

The illustrations on these labels help workers identify flammable hazards and corrosive materials at a glance.

The graphics on these labels identify hazardous materials and provide safety reminders.

The illustrations on these labels help workers identify safety reminders at a glance.

Specify the printed message you’d like to appear under the header of these labels.

Help prevent accidents in areas with slippery floors, tripping hazards, or low headroom.

The illustrations on these labels help workers identify restricted areas at a glance.

The illustrations on these labels help workers identify confined spaces at a glance.

A reference chart explains the NFPA (National Fire Protection Association) colors and number designations for hazards. Provide the appropriate code number using the NFPA diamond.

Alert workers to the presence of chemicals, combustible liquids and gases, and other hazardous materials.

Alert others to the presence of chemicals such as carbon monoxide, tobacco smoke, and wood dust.

Similar to a Safety Data Sheet (SDS), these signs keep workers informed about chemical and gas usage, warnings, and treatment in the event of exposure.

Give employees access to Safety Data Sheets (SDS) and training booklets according to OSHA's Hazard Communication Standards.

Notify workers of electrical hazards such as arc flashes, buried cable, and high-voltage equipment.

The illustrations on these signs help workers identify hazards at a glance.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

The illustrations on these signs help workers identify tripping hazards at a glance.

Collapse these signs when not in use. They have the same message printed on all three sides to help prevent accidents around slippery floors.

Fold these signs flat when not in use. They have the same message on all sides to help prevent accidents around slippery floors and tripping hazards.

Designate areas that require personal protective equipment such as safety glasses and earmuffs.

Use the included symbols to inform workers of all the personal protection equipment required.

These signs can be read when viewed in a rearview mirror.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

Clearly define dangerous areas such as construction zones and welding areas to restrict access to only authorized personnel.

These signs have the same message on each side. Place them where needed to clearly define and restrict access to dangerous areas, then fold them when not in use.

Attach these signs to the top of any traffic cone.

Write a message in the blank space below the header using a permanent marker or adhesive-back characters.

Identify confined spaces that require authorized permit-only entry.

Mark your lockout station with a sign that employees will see from anywhere in the room.

Promote and remind people to maintain social distancing to protect themselves and others from the spread of illness.

Define lockout and tagout procedures to help prevent unexpected startups during machine maintenance and repair work.

Communicate hand signals for directing crane operation.

Motivate employees to follow good work and safety practices.

Write on these signs with a dry-erase marker or use adhesive-back numbers.

Remind employees to wash hands before returning to work.

Mark the location of fire alarms, extinguishers, and other fire safety equipment, so you can find them quickly in an emergency.

Expose these signs to ambient light and they stay visible in the dark.

These signs have a handle for guiding pedestrians and vehicle traffic manually.

Communicate two- or four-way stops with one freestanding stop sign.

Identify the presence of hazardous materials with D.O.T.-regulated numbers, symbols, and messages.

Alert other drivers about the size of your vehicle or load.

Designate parking spaces that are accessible.

Mark entrances, employee-only work areas, and no-trespassing zones.

Communicate your policy regarding the possession and use of firearms on a work site.

Use the included bracket to mount these signs perpendicular to a wall or ceiling. They meet UL 924 regulations for visibility.

These signs meet federal regulations for the visually impaired and help comply with the Americans with Disabilities Act (ADA) when installed properly.

Identify the location of exits throughout a facility.

Illuminate exits during power failures and other emergencies—these signs have battery-powered emergency lights. The backlit message meets UL 924 regulations for visibility.

These signs are rated NEMA 4X for corrosion resistance and washdown environments.

Clearly mark areas of your facility with these signs.

Expose these signs to ambient light and they stay visible in the dark.

Provide information about CPR, treating minor burns, and other emergency first-aid measures.

Point personnel to first-aid equipment in case of an emergency.

Attach these signs to the top of any traffic cone.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

Log details about routine equipment inspections.

The messages on these tags display the status of your materials. Use them to mark equipment and track work in progress.

The perforated lower stub has the same number as the top portion so they can be matched.

Sort and flag items for removal or disposal with these highly visible red tags.

Write on the top sheet and the information transfers to the cardstock tag on the back. Tear the top sheet off and keep it in your files.

Remind workers to use lockout devices and procedures to prevent unexpected machine startups during maintenance and repair work.

Sign and date these tags and then seal the laminating flap to protect the text from smudging and wear.

Use these tags to describe equipment and lockout/tagout procedures.

Provide appropriate code numbers for hazards with these NFPA (National Fire Protection Association) tags.

Guide workers through a safety checklist before welding, grinding, cutting, or other work involving fire or sparks.

Communicate dangers to workers near equipment that could cause injury.

Seal valves, latches, containers, and other devices with these traceable, tamper-evident tags, which are designed for food, pharmaceutical, and other sanitary environments.

Specify a message and starting number.

Push these tags through hasps on cabinets, truck trailers, cargo containers, and other heavy duty equipment. With an average breaking strength of 3,000 lbs., they are more secure than other tamper-seal tags.

These tags are stamped with "SEALED" and are numbered consecutively, starting with a random number.

Thread the thin wire on these tags through small holes and around oddly shaped items.

Create custom-length seal tags using locks and wire.

These tags are stamped with "SEALED" and a random number.

Made of polypropylene, these water- and chemical-resistant tags have perforated green, yellow, and red sections that can be quickly torn off to show when the status of an item or project changes. Write on them with a permanent marker.

Made of a pliable PVC with a rubber adhesive, this tape stretches and conforms to uneven surfaces for a secure hold.

Designate aisles and work zones in your clean room. Individually bagged, this tape is made to the highest standards for cleanliness, releasing minimal contaminants and leaving no residue behind.

Call attention to hazards in low-light conditions.

These peel-and-stick shapes make it easy to outline equipment and other areas within your facility.

Direct traffic and identify safety zones in the dark for up to six hours.

You can easily pull this tape up when it's no longer needed.