Bolt-On Fall-Arrest Anchor Points
Mounting Holes | |||||||
---|---|---|---|---|---|---|---|
Capacity, lbs. | Material | Connection Type | Dia. | No. of | Fasteners Included | Each | |
Bolt On | |||||||
310 | Steel | D-Ring | 9/16" | 2 | No | 00000000 | 000000 |
Stationary I-Beam Fall-Arrest Anchor Points
Mount this anchor to vertical and horizontal I-beams.
For I-Beam Flange | ||||||
---|---|---|---|---|---|---|
Wd. | Thick. | Capacity, lbs. | Material | Connection Type | Each | |
Clamp On | ||||||
4" to 14" | 1 1/2" | 310 | Stainless Steel | D-Ring | 00000000 | 0000000 |
Webbing Boom Strap Fall-Arrest Anchor Points
Attach to the arm of a bucket truck. The strap has a cinching buckle for a snug, nonslip fit.
For Max. Dia. | Capacity, lbs. | Material | Construction | Connection Type | Features | Each | |
42" | 350 | Polyester | Webbing | D-Ring | Cinching Buckle | 00000000 | 000000 |
Push-In Fall-Arrest Anchor Points for Concrete
Wedge this anchor into a drilled mounting hole—it's good for vertical and horizontal concrete applications.
For Mounting Hole Dia. | Capacity, lbs. | Material | Connection Type | Each | |
Push In | |||||
---|---|---|---|---|---|
5/8" | 400 | Steel | D-Ring | 00000000 | 000000 |
Nail-On Fall-Arrest Anchor Points for Roofs
Capacity, lbs. | Material | Connection Type | Fasteners Included | Each | |
Nail On | |||||
---|---|---|---|---|---|
310 | Steel | D-Ring | No | 00000000 | 000000 |
Fall-Arrest Anchor Points with Winch
This system provides support when lowering workers into and retrieving them from tight spaces. Use the hand-operated winch to control lifting and lowering. You supply a harness.
The system comes with an adjustable mast and a separate portable base. For fixed-base installation, use the wall-mount or floor-mount base—weld or bolt the base to a concrete or steel structure and insert the mast into the opening.
Wire Rope Lg., ft. | Ht. | Arm Lg. | Capacity, lbs. | Material | Snap Hook Material | Wire Rope Material | Features | Specifications Met | Each | |
65 | 79" to 100" | 12" to 29" | 350 | Aluminum | Steel | Galvanized Steel | Portable Base | ANSI/ASSE A10.32, ANSI/ASSP Z359.1 | 0000000 | 000000000 |
Fall-Arrest Harnesses
Harnesses have a D-ring that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
Polyester/elastomer harnesses expand and contract with your movements.
Padded harnesses have breathable padding on the back for all-day comfort.
Available Sizes | |||
---|---|---|---|
Size | For Height | For Weight | Waist Size |
Pullover Harness with Traditional Thigh Buckle—Polyester | |||
M/L | 5'0"-6'4" | 140-280 lbs. | 32" to 48" |
XL | 5'4"-6'6" | 200-330 lbs. | 36" to 54" |
2XL | 5'6"-6'8" | 230-380 lbs. | 42" to 57" |
3XL | 5'8"-6'8" | 250-400 lbs. | 46" to 60" |
Pullover Harness with Slide Thigh Buckle—Polyester | |||
S | 4'10"-6'0" | 100-160 lbs. | 26" to 38" |
M/L | 5'0"-6'4" | 140-280 lbs. | 32" to 48" |
XL | 5'4"-6'6" | 200-330 lbs. | 36" to 54" |
2XL | 5'6"-6'8" | 230-380 lbs. | 42" to 57" |
3XL | 5'8"-6'8" | 250-400 lbs. | 46" to 60" |
Pullover Harness with Squeeze Release Thigh Buckle—Polyester | |||
S | 4'10"-6'0" | 100-160 lbs. | 26" to 38" |
M | 5'0"-6'2" | 140-240 lbs. | 30" to 42" |
M/L | 5'0"-6'4" | 140-280 lbs. | 32" to 48" |
L | 5'2"-6'4" | 170-300 lbs. | 34" to 50" |
XL | 5'4"-6'6" | 200-330 lbs. | 36" to 54" |
2XL | 5'6"-6'8" | 230-380 lbs. | 42" to 57" |
Front-Buckle Harness with Traditional Thigh Buckle—Polyester | |||
XXS/XS | 5’-6’2” | 0-150 lbs. | 24" to 32" |
M/L | 5'4"-6'5" | 150-225 lbs. | 32" to 48" |
XL | 5'4"-6'6" | 225-300 lbs. | 36" to 52" |
2XL | 5'4"-6'6" | 300-400 lbs. | 45" to 57" |
Front-Buckle Harness with Traditional Thigh Buckle— Polyester/Elastomer | |||
XL | 5'4"-6'8" | 190-300 lbs. | 36" to 52" |
Front-Buckle Harness with Slide Thigh Buckle—Polyester | |||
XXS/XS | 5’-6’2” | 0-150 lbs. | 24" to 32" |
M/L | 5'4"-6'5" | 150-225 lbs. | 32" to 48" |
XL | 5'4"-6'6" | 225-300 lbs. | 36" to 52" |
2XL | 5'4"-6'6" | 300-400 lbs. | 45" to 57" |
Front-Buckle Harness with Slide Thigh Buckle—Polyester/Elastomer | |||
XL | 5'4"-6'8" | 190-300 lbs. | 36" to 52" |
Front-Buckle Harness with Squeeze Release Thigh Buckle— Polyester/Elastomer | |||
S/M | 4'11"-5'9" | 90-190 lbs. | 30" to 42" |
L/XL | 4'11"-6'7" | 190-340 lbs. | 40" to 52" |
2XL/3XL | 4'11"-6'7" | 340-400 lbs. | 45" to 57" |
Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Specifications Met | Features | Choose a Size | Each | |
Pullover Harness with Traditional Thigh Buckle | |||||||
---|---|---|---|---|---|---|---|
400 | Polyester | Back (1); Chest (1) | ANSI/ASSP Z359.11 | __ | 00000000 | 0000000 | |
Pullover Harness with Slide Thigh Buckle | |||||||
400 | Polyester | Back (1); Chest (1) | ANSI/ASSP Z359.11 | __ | 00000000 | 000000 | |
Pullover Harness with Squeeze Release Thigh Buckle | |||||||
400 | Polyester | Back (1); Chest (1) | ANSI/ASSP Z359.11 | __ | 00000000 | 000000 | |
Front-Buckle Harness with Traditional Thigh Buckle | |||||||
400 | Polyester | Back (1) | ANSI/ASSP Z359.11 | __ | 0000000 | 00000 | |
400 | Polyester/Elastomer | Back (1) | ANSI/ASSE A10.32, ANSI/ASSP Z359.1, ANSI/ASSP Z359.11 | __ | XL | 0000000 | 000000 |
Front-Buckle Harness with Slide Thigh Buckle | |||||||
400 | Polyester | Back (1) | ANSI/ASSP Z359.11 | __ | 0000000 | 00000 | |
400 | Polyester/Elastomer | Back (1) | ANSI/ASSE A10.32, ANSI/ASSP Z359.1, ANSI/ASSP Z359.11 | __ | XL | 0000000 | 000000 |
Front-Buckle Harness with Squeeze Release Thigh Buckle | |||||||
420 | Polyester/Elastomer | Back (1) | ANSI/ASSP Z359.11 | Padded Back | 0000000 | 000000 |
Fall-Arrest Harnesses for Positioning
D-rings on each hip provide a stable working position. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Harness Size (Waist) | For Height | For Weight, lbs. | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | ||||||||
---|---|---|---|---|---|---|---|---|
400 | Polyester | Back (1), Hips (2) | One Size Fits All (44" to 48") | 5'9-6'7 | 190-400 | ANSI Z359.1 | 0000000 | 0000000 |
Zip-Up Harness with Slide Thigh Buckle | ||||||||
310 | Polyester | Back (1), Hips (2) | M (34" to 37") | 5’-6’3” | 140-250 | ANSI Z359.1 | 0000000 | 000000 |
310 | Polyester | Back (1), Hips (2) | L (38" to 41") | 5’-6’3” | 140-250 | ANSI Z359.1 | 0000000 | 000000 |
310 | Polyester | Back (1), Hips (2) | XL (42" to 49") | 5’2”-6’6” | 180-310 | ANSI Z359.1 | 0000000 | 000000 |
Fall-Arrest Harnesses for Ladder Climbing and Positioning
These versatile harnesses have one D-ring on the chest for use with ladder-climbing systems as well as one D-ring on each hip to provide a stable working position. Attach harness to a ladder-climbing system using a carabiner. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | Waist Size | Specifications Met | Each | |
Pullover Harness with Traditional Thigh Buckle | |||||||
---|---|---|---|---|---|---|---|
400 | Polyester | Back (1), Chest (1), Hips (2) | One Size Fits All | 32" to 48" | ANSI Z359.1 | 0000000 | 0000000 |
Quick-Stop Fall-Arrest Lanyards
A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance as it will stop your fall within a few inches. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyard attaches to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Specifications Met | Each | |
Single Leg | ||||||||||||
6 | 310 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 0000000 |
9 | 310 | Polyester | Webbing | Shackle | Stainless Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
11 | 310 | Polyester | Webbing | Shackle | Stainless Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
20 | 420 | Nylon | Webbing | Swivel Eye | Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
25 | 310 | Stainless Steel | Wire Rope | Carabiner | Stainless Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
50 | 420 | Stainless Steel | Wire Rope | Swivel Eye | Stainless Steel | Snap Hook | Stainless Steel | 3/4" | Aluminum, Stainless Steel | ANSI Z359.14 | 0000000 | 00000000 |
Dual Leg | ||||||||||||
6 | 310 | Polyester | Webbing | Pin Retainer | Aluminum | Snap Hook/Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
Quick-Stop Fall-Arrest Lanyards with Anchor Point
These lanyards form their own anchor point by attaching directly to a rated structure. A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Hook-over lanyard has a large snap hook that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.
Wraparound lanyard loops around a rated structure such as an I-beam and then attaches to itself to create an anchor point.
Harness End Connection | Anchor End Connection | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Specifications Met | Each | |
Hook Over Single Leg | ||||||||||||
6 | 310 | Polyester | Webbing | Carabiner | Steel | Snap Hook | Steel | 2 1/2" | Plastic | ANSI Z359.14 | 0000000 | 0000000 |
Wraparound Single Leg | ||||||||||||
7 1/2 | 310 | Polyester | Webbing | Pin Retainer | Aluminum | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
Shock-Absorbing Fall-Arrest Lanyards
Single Leg | Dual Leg | |
For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyards attach to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
Dual Leg | ||||||||||||
6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
6 | 9 1/2 | 420 | Polyester | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | __ | 000000 | 000000 |
Tool Lanyards
Keep your equipment close and prevent accidental drops.
For No. of Tools | Connection Type | Capacity, lbs. | Lg. | Material | Construction | For Min. Tool Opening | Carabiner Material | Each | |
1 | Carabiner × Elastic Loop | 10 | 35" | Nylon | Webbing | 3/8" | Aluminum | 0000000 | 000000 |
1 | Carabiner × Detachable Elastic Loop | 5 | 38" | Nylon | Webbing | 3/8" | Aluminum | 0000000 | 00000 |
1 | Carabiner × Carabiner | 10 | 35" | Nylon | Webbing | 1/4" | Aluminum | 0000000 | 00000 |
2 | Carabiner × Carabiner × Carabiner | 15 | 35" | Nylon | Webbing | 1/4" | Stainless Steel | 0000000 | 00000 |
Replacement Detachable Elastic Loop | 0000000 | Each | 00000 |
Hard-Hat Lanyards
Attach to your hard hat to prevent accidental drops.
Lg. | Material | Construction | Connection Type | Each | |
23 1/4" | Polyester/Rubber | Webbing | Elastic Strap with Cinching Buckle × Cinching Buckle | 0000000 | 00000 |
Twist-Locking Carabiners—Not for Lifting
Latch
Position
Latch
Position
Hold rope more securely than nonlocking and slide-release carabiners. While these carabiners are not as secure as screw-locking carabiners, they are easier to open.
Pull down/twist 90°/push in and lift up/twist 90°/push in carabiners are more secure than twist 90°/push in because they require an extra step to open.
Zinc-plated steel carabiners are mildly corrosion resistant. Aluminum carabiners are more lightweight and resist corrosion better than zinc-plated steel. Anodized carabiners offer excellent corrosion resistance. Stainless steel carabiners have excellent resistance to salt water and chemicals.
Styles 3 and 7-13 have either a removable eye pin or eyelet that secures rope to one end of the carabiner to prevent it from sliding or moving.
Carabiners with an offset latch open to the side, giving you more space to attach large items.
Carabiners with a locking indicator have a symbol that is shown when the carabiner is fully locked.
Carabiners that meet ANSI/ASSP Z359.12 have been tested for use in fall protection systems.
For technical drawings and 3-D models, click on a part number.
Style | Capacity, lbs. | Thick. | Opening Wd. | Inside Lg. | Narrow-End Inside Wd. | Open Latch Position | Locking Indicator | Color | Specifications Met | Each | |
Pull Down/Twist 90°/Push In | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
17-4 PH Stainless Steel | |||||||||||
3 | 8,900 | 7/16" | 15/16" | 3 1/2" | 1" | Offset | Yes | __ | ANSI/ASSP Z359.12, CE Marked | 0000000 | 000000 |
4 | 8,900 | 7/16" | 15/16" | 3 1/2" | 1 1/4" | Offset | Yes | __ | ANSI/ASSP Z359.12, CE Marked | 0000000 | 00000 |
5 | 11,200 | 7/16" | 1 3/16" | 4 1/16" | 1 3/4" | Offset | Yes | __ | ANSI/ASSP Z359.12, CE Marked | 0000000 | 00000 |
Lift Up/Twist 90°/Push In | |||||||||||
Zinc-Plated Steel | |||||||||||
6 | 5,000 | 7/16" | 13/16" | 3 1/4" | 1 1/4" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 00000 |
7 | 5,000 | 7/16" | 1" | 4" | 3/8" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 00000 |
8 | 5,000 | 9/16" | 2 1/4" | 7 1/2" | 1 13/16" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 00000 |
9 | 5,000 | 9/16" | 1 3/16" | 6 1/8" | 1" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 000000 |
Anodized Aluminum | |||||||||||
12 | 5,000 | 1/2" | 7/8" | 3 3/4" | 1" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |
12 | 5,000 | 11/16" | 2" | 8" | 7/8" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |
17 | 5,000 | 1/2" | 13/16" | 3 1/2" | 7/8" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |
420 Stainless Steel | |||||||||||
6 | 5,000 | 7/16" | 7/8" | 3 7/16" | 1 1/8" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |
Hard-Hat Chin Straps
Hold your hard hat securely on your head with these chin straps. Clip them into the slots in your hard hat and adjust the strap length with a slider for a snug fit.
For extra comfort, use straps with chin guard. These contoured cups hug your chin and protect it from scrapes.