How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Underground PVC Pipe for Drain, Waste, and Vent
- For Use With: Water
- Max. Temperature: 140° F
- Specifications Met: ASTM D2729
This pipe has thinner walls than Schedule 40 pipe, so it’s lighter in weight and has more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. Pipe is PVC, which has good corrosion resistance. Connect to unthreaded female socket-connect fittings using a PVC primer and cement (also known as solvent weld). Pipe meets ASTM D2729 specifications and testing requirements for material quality.
Perforated pipe has holes along the side of the pipe to disperse drainage and prevent water from pooling.
10-ft. long pipe has one expanded end that connects to another length of pipe with a standard end without needing a fitting. Push the standard pipe end into the expanded pipe end and secure with PVC primer and cement.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
4 1/2 ft. | 10 ft. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Sewer Pipe Trade Size  | OD | ID | Wall Thick. | Material | Color | Each | Each | ||
Pipe | |||||||||
| 3 | 3 1/4" | 3.11" | 0.07" | PVC Plastic | White | 0000000 | 000000 | 0000000 | 000000 |
| 4 | 4 7/32" | 4.065" | 0.075" | PVC Plastic | White | 0000000 | 00000 | 0000000 | 00000 |
| 6 | 6 9/32" | 6.075" | 0.1" | PVC Plastic | White | 0000000 | 00000 | 0000000 | 00000 |
Perforated Pipe | |||||||||
| 3 | 3 1/4" | 3.11" | 0.07" | PVC Plastic | White | 000000 | 00 | 0000000 | 00000 |
| Pipe Cement (8 fl. oz. Can) | 000000000 | Each | 00000 |
Filter Sleeves for Underground Perforated Drain Pipe
Protect perforated underground drain pipe from clogging. These woven polyester sleeves prevent dirt from entering while still allowing waste to drain out. Cut sleeve to length using scissors and slide over drain pipe.
For Pipe | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | OD | Wall Thick. | Material | For Pipe Material | Color | Specifications Met | Each | |
10-ft. Lg. | ||||||||
| 3 | 3 5/8" | 0.024" | Polyester Fabric | Polyethylene Plastic | White | ASTM D6707 Type A | 0000000 | 00000 |
| 4 | 4 5/8" | 0.024" | Polyester Fabric | Polyethylene Plastic | White | ASTM D6707 Type A | 0000000 | 0000 |
100-ft. Lg. | ||||||||
| 3 | 3 5/8" | 0.024" | Polyester Fabric | Polyethylene Plastic | White | ASTM D6707 Type A | 0000000 | 00000 |
| 4 | 4 5/8" | 0.024" | Polyester Fabric | Polyethylene Plastic | White | ASTM D6707 Type A | 0000000 | 00000 |
Underground Snap-Lock Polyethylene Pipe for Drain, Waste, and Vent
- For Use With: Water
- Specifications Met: ASTM F667
Pipe has a snap-together design that allows you to quickly connect to fittings with no cement required. It is typically used in gravity-flow drainage applications. Made of high-density polyethylene (HDPE), it stands up to freeze/thaw cycles and resists corrosion and stress cracking. Pipe is corrugated inside and out for flexibility. It meets ASTM F667 specifications and testing requirements for material quality as well as soil conservation service (SCS) standards for use in underground drain lines.
Nonperforated pipe allows you to flow drainage to one area. Perforated pipe has slits along the entire length that allow drainage to be dispersed.
Female/male ends connect to female or male snap-lock fittings. Male ends allow you to join two lengths of pipe without the need for a fitting.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas. Do not expose pipe to direct sunlight.
For technical drawings and 3-D models, click on a part number.
Drain, Waste, and Vent ABS Pipe for Chemicals
- For Use With: Sodium Hydroxide
- Max. Temperature: 140° F
- Fittings: Use Schedule 40 ABS Plastic
- Flanges: Use Schedule 40 ABS Plastic
Use this Schedule 40 pipe as an economical option for gravity-flow chemical waste systems. Pipe is ABS plastic, which has excellent strength and impact resistance and good chemical resistance. Connect to unthreaded female socket-connect fittings using ABS cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
5 ft. | 10 ft. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | OD | ID | Wall Thick. | Material | Color | Each | Each | ||
| 1 1/2 | 1 29/32" | 1.61" | 0.145" | ABS Plastic | Black | 00000000 | 000000 | 00000000 | 000000 |
| 2 | 2 3/8" | 2.067" | 0.154" | ABS Plastic | Black | 00000000 | 00000 | 00000000 | 00000 |
| 3 | 3 1/2" | 3.068" | 0.216" | ABS Plastic | Black | 00000000 | 00000 | 00000000 | 000000 |
| 4 | 4 1/2" | 4.026" | 0.237" | ABS Plastic | Black | 00000000 | 000000 | 00000000 | 000000 |
| Pipe Cement (8 fl. oz. Can) | 00000000 | Each | 00000 |
Gravity-Flow CPVC Pipe for Corrosive Chemical Waste
- For Use With: Hydrochloric Acid, Nitric Acid, Salt Water, Sulfuric Acid
- Temperature Range: 40° to 200° F
- Specifications Met: ASTM F2618, IAPMO Listed, NSF/ANSI 14, UL 94 V-0
Use this pipe in gravity-flow applications that involve highly-corrosive chemicals–it meets NSF/ANSI 14 requirements for use in corrosive waste systems. Pipe is made of CPVC, which has better chemical resistance than ABS plastic to stand up to acids and other harsh substances. Connect to unthreaded female socket-connect fittings using a CPVC primer and cement (also known as solvent weld). Pipe is comparable to Corzan. It meets UL 94 V-0 for flame retardance and ASTM F2618 specifications and testing requirements for material quality. It is IAPMO certified to comply with the International Association for Plumbing and Mechanical Officials product performance standards and the Uniform Plumbing Code (UPC) for installation and repair of plumbing systems.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | OD | ID | Wall Thick. | Material | Color | Each | |
2 ft. | |||||||
|---|---|---|---|---|---|---|---|
| 1 1/2 | 1 29/32" | 1.61" | 0.145" | CPVC Plastic | Light Gray | 0000000 | 000000 |
| 2 | 2 3/8" | 2.067" | 0.154" | CPVC Plastic | Light Gray | 0000000 | 00000 |
4 ft. | |||||||
| 1 1/2 | 1 29/32" | 1.61" | 0.145" | CPVC Plastic | Light Gray | 0000000 | 00000 |
| 2 | 2 3/8" | 2.067" | 0.154" | CPVC Plastic | Light Gray | 0000000 | 000000 |
8 ft. | |||||||
| 1 1/2 | 1 29/32" | 1.61" | 0.145" | CPVC Plastic | Light Gray | 0000000 | 000000 |
| 2 | 2 3/8" | 2.067" | 0.154" | CPVC Plastic | Light Gray | 0000000 | 000000 |
| Pipe Cement (16 fl. oz. Can) | 0000000 | Each | 000000 |
Gravity-Flow Polypropylene Pipe for Corrosive Chemical Waste
Made of polypropylene, this gravity-flow pipe stands up to tough organic solvents, such as acetone, that would dissolve CPVC pipe. You can also use it for lines with highly corrosive acids, such as hydrochloric acid, and alkalies. This pipe meets strict ASTM specifications and testing requirements for material quality and product dimensions. It also meets ASTM and UL flammability standards. This pipe is known as schedule 40 pipe.
Connect clamp-on fittings to the grooved-ends of this pipe when you need frequent access to your line. If you need to trim down the pipe, you'll need a grooving tool (sold separately) to add a groove for your fitting. For a permanent connection, fuse socket-connect fittings on with an electrofusion tool (sold separately).
For technical drawings and 3-D models, click on a part number.
- For Use With: Deionized Water, Hydrochloric Acid, Oil, Phosphoric Acid, Salt Water, Solvents
- Maximum Temperature: 220° F
- Specifications Met: ASTM D4101, ASTM D635, ASTM F1412, UL 94 V-2
- Compatible with Gravity-Flow Polypropylene Pipe Fittings for Corrosive Chemical Waste
Pipe | Grooving Tools | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | OD | ID | Wall Thick. | Material | Color | Lg., ft. | Each | Each | ||
Electrofusion Socket Connect/Grooved End Clamp On | ||||||||||
| 1 1/2 | 1 29/32" | 1.61" | 0.145" | Polypropylene Plastic | Blue | 10 | 0000000 | 0000000 | 000000 | 0000000 |
| 2 | 2 3/8" | 2.067" | 0.154" | Polypropylene Plastic | Blue | 10 | 0000000 | 000000 | 000000 | 000000 |
| 3 | 3 1/2" | 3.068" | 0.216" | Polypropylene Plastic | Blue | 10 | 0000000 | 000000 | 000000 | 00000000 |
| 4 | 4 1/2" | 4.026" | 0.237" | Polypropylene Plastic | Blue | 10 | 0000000 | 000000 | 000000 | 000000 |
| Data Connection Type | Output Current @ Voltage | Input Voltage Range | Input Frequency Range, Hz | Digital Display Type | Includes | Each | |
| Bluetooth | 20 A @ 95 V AC | 97-150V AC | 47-70 | LCD | 12 ft. Input Cable, 24 ft. Output Cable | 0000000 | 000000000 |
Drain, Waste, and Vent Iron Pipe
Use this pipe in gravity-flow applications both above and below ground. It is also known as no-hub pipe and soil pipe. To connect, butt the end of a fitting up against pipe or another fitting and connect with a low-pressure clamp-on connector (sold separately). The clamp-on connector is also known as a no-hub coupling. Fittings are for use in noncorrosive environments. Pipe is seamless, so it has a smooth interior for unrestricted flow. It is for use in noncorrosive environments.
For technical drawings and 3-D models, click on a part number.
- For Use With: Water
- Temperature Range: 0° to 180° F
- Specifications Met: ASTM A666, ASTM C564
- For Pipe Material: Aluminum, Iron, Steel, Stainless Steel, PVC Plastic
- For Use With: Water
- Temperature Range: 0° to 180° F
- Specifications Met: ASTM A666, ASTM C564
- For Pipe Material: Aluminum, Iron, Steel, Stainless Steel, PVC Plastic
- For Tube Material: Copper
- For Use With: Water
- Temperature Range: 0° to 180° F
- Specifications Met: ASTM A666, ASTM C564
- For Pipe Material: Aluminum, Iron, Steel, Stainless Steel, PVC Plastic