About Rubber
More
About Plastic
More
High-Temperature Silicone Rubber 90° Angles
- Color: Red
- Temperature Range: -60° to 400° F
- Tensile Strength: 700 psi
- For Use Outdoors: Yes
Seal and cushion corners with these 90° angles. Silicone, also known as polysiloxane, offers good resistance to ozone and salt water.
For technical drawings and 3-D models, click on a part number.
Fire-Retardant High-Temperature Silicone Rubber 90° Angles
- Color: Black
- Temperature Range: -85° to 400° F
- Tensile Strength: 725 psi
- For Use Outdoors: Yes
- Specifications Met: ASTM D2000 GE, UL 94 V-0
These 90° angles meet UL 94V0 for flame retardance. Use them to seal and cushion corners. Made of silicone, which is also known as polysiloxane, they have good resistance to ozone and salt water.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Width | Height | Width | Height | Wall Thickness | Wall Thickness Tolerance | Durometer | Each | |
3 ft. Lg | ||||||||
| 1/2" | 1/2" | 3/8" | 3/8" | 1/8" | -0.027" to 0.027" | 60A (Medium Hard) | 0000000 | 000000 |
| 3/4" | 3/4" | 5/8" | 5/8" | 1/8" | -0.027" to 0.027" | 60A (Medium Hard) | 0000000 | 00000 |
| 1" | 1" | 7/8" | 7/8" | 1/8" | -0.027" to 0.027" | 60A (Medium Hard) | 0000000 | 00000 |
6 ft. Lg | ||||||||
| 1/2" | 1/2" | 3/8" | 3/8" | 1/8" | -0.027" to 0.027" | 60A (Medium Hard) | 0000000 | 00000 |
| 3/4" | 3/4" | 5/8" | 5/8" | 1/8" | -0.027" to 0.027" | 60A (Medium Hard) | 0000000 | 00000 |
| 1" | 1" | 7/8" | 7/8" | 1/8" | -0.027" to 0.027" | 60A (Medium Hard) | 0000000 | 00000 |
Food Industry High-Temperature Silicone Rubber 90° Angles
- Color: White
- Temperature Range: -85° to 400° F
- Tensile Strength: 900 psi
- For Use Outdoors : Yes
- Specifications Met: ASTM D2000 GE, FDA Compliant 21 CFR 177.2600, NSF/ANSI 51
FDA compliant and NSF/ANSI 51 certified, these 90° angles are approved for direct contact with food. Use them to seal, protect, and cushion corners. Made of silicone—also known as polysiloxane—they resist ozone and salt water.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 3 ft. Lg. | 6 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Width | Height | Width | Height | Wall Thickness | Wall Thickness Tolerance | Durometer | Each | Each | ||
| 1/2" | 1/2" | 3/8" | 3/8" | 1/8" | -0.027" to 0.027" | 50A (Medium) | 00000000 | 000000 | 00000000 | 000000 |
| 3/4" | 3/4" | 5/8" | 5/8" | 1/8" | -0.027" to 0.027" | 50A (Medium) | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 7/8" | 7/8" | 1/8" | -0.027" to 0.027" | 50A (Medium) | 00000000 | 00000 | 00000000 | 00000 |
High-Strength High-Temperature Silicone Rubber 90° Angles
- Color: Red
- Temperature Range: -85° to 400° F
- Tensile Strength: 1,200 psi
- For Use Outdoors: Yes
- Specifications Met: ASTM D2000 GE
With nearly twice the tensile strength of standard high-temperature silicone, these 90° angles absorb shock better and last longer. Use them to seal and cushion corners. They resist ozone and salt water.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 3 ft. Lg. | 6 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Width | Height | Width | Height | Wall Thickness | Wall Thickness Tolerance | Durometer | Each | Each | ||
| 1/2" | 1/2" | 3/8" | 3/8" | 1/8" | -0.027" to 0.027" | 50A (Medium) | 0000000 | 000000 | 0000000 | 000000 |
| 3/4" | 3/4" | 5/8" | 5/8" | 1/8" | -0.027" to 0.027" | 50A (Medium) | 0000000 | 00000 | 0000000 | 00000 |
| 1" | 1" | 7/8" | 7/8" | 1/8" | -0.027" to 0.027" | 50A (Medium) | 0000000 | 00000 | 0000000 | 00000 |
Weather-Resistant EPDM Rubber 90° Angles
- Color: Black
- Temperature Range: -30° to 200° F
- Tensile Strength: 1,100 psi
- For Use Outdoors: Yes
Resistant to sunlight, ozone, and water, these 90° angles are good for sealing and cushioning corners.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 3 ft. Lg. | 6 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Width | Height | Width | Height | Wall Thickness | Wall Thickness Tolerance | Durometer | Each | Each | ||
| 1/4" | 7/16" | 5/32" | 11/32" | 3/32" | -0.032" to 0.032" | 70A (Hard) | 00000000 | 00000 | 00000000 | 000000 |
| 1/4" | 1/2" | 3/16" | 7/16" | 1/16" | -0.032" to 0.032" | 70A (Hard) | 00000000 | 0000 | 00000000 | 00000 |
| 5/16" | 5/16" | 7/32" | 7/32" | 3/32" | -0.032" to 0.032" | 70A (Hard) | 00000000 | 0000 | 00000000 | 00000 |
| 1/2" | 1 3/4" | 1/4" | 1 1/2" | 1/4" | -0.063" to 0.063" | 70A (Hard) | 00000000 | 00000 | 00000000 | 00000 |
| 9/16" | 5/8" | 15/32" | 17/32" | 3/32" | -0.063" to 0.063" | 70A (Hard) | 00000000 | 0000 | 00000000 | 00000 |
| 3/4" | 3/4" | 1/2" | 1/2" | 1/4" | -0.063" to 0.063" | 70A (Hard) | 00000000 | 00000 | 00000000 | 00000 |
| 3/4" | 3/4" | 5/8" | 5/8" | 1/8" | -0.032" to 0.032" | 70A (Hard) | 00000000 | 0000 | 00000000 | 00000 |
| 1" | 1" | 3/4" | 3/4" | 1/4" | -0.063" to 0.063" | 70A (Hard) | 00000000 | 00000 | 00000000 | 00000 |
| 1 1/4" | 1 1/4" | 1 1/8" | 1 1/8" | 1/8" | -0.032" to 0.032" | 70A (Hard) | 00000000 | 00000 | 00000000 | 00000 |
| 1 1/4" | 3" | 1" | 2 3/4" | 1/4" | -0.063" to 0.063" | 70A (Hard) | 00000000 | 00000 | 00000000 | 00000 |
| 1 1/2" | 1 1/2" | 1 1/4" | 1 1/4" | 1/4" | -0.063" to 0.063" | 70A (Hard) | 00000000 | 00000 | 00000000 | 00000 |
| 1 1/2" | 1 1/2" | 1 3/8" | 1 3/8" | 1/8" | -0.032" to 0.032" | 70A (Hard) | 00000000 | 00000 | 00000000 | 00000 |
Slippery UHMW Polyethylene 90° Angles
- Color: White
- Temperature Range: -20° F to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: ASTM D4020, FDA Compliant 21 CFR 177.1520
Often used to fabricate frames and protect corners from impact, these UHMW 90° angles have a slippery surface that stands up to scuffs, scrapes, and strikes.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Lengths, ft. | Per Ft. | |
1/8" Wall Thick. (-0.060" to 0.060") | ||||||||
| 1" | -0.060" to 0.060" | 1" | -0.060" to 0.060" | 7/8" | 7/8" | 0000000 | 00000 | |
| 1 1/2" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 1 3/8" | 1 3/8" | 0000000 | 0000 | |
| 2" | -0.060" to 0.060" | 2" | -0.060" to 0.060" | 1 7/8" | 1 7/8" | 0000000 | 0000 | |
1/4" Wall Thick. (-0.060" to 0.060") | ||||||||
| 5/8" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 3/8" | 1 1/4" | 0000000 | 0000 | |
| 1 1/2" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 1 1/4" | 1 1/4" | 0000000 | 0000 | |
| 2" | -0.060" to 0.060" | 2" | -0.060" to 0.060" | 1 3/4" | 1 3/4" | 0000000 | 0000 | |
1/2" Wall Thick. (-0.060" to 0.060") | ||||||||
| 3" | -0.060" to 0.060" | 3" | -0.060" to 0.060" | 2 1/2" | 2 1/2" | 0000000 | 00000 | |
| 3 1/2" | -0.060" to 0.060" | 3 1/2" | -0.060" to 0.060" | 3" | 3" | 0000000 | 00000 | |
Polypropylene 90° Angles
- Color: Semi-Clear White
- Temperature Range: -40° to 180° F
- Tensile Strength: 5,200 psi (Good)
- Impact Strength: 1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D4101, FDA Compliant 21 CFR 177.1520
Fabricate guide rails and parts for use in laboratories with these 90° angles. They’re polypropylene, so they have a hard, slippery surface that won’t stick to cutting tools. They also resist swelling when exposed to water.
For technical drawings and 3-D models, click on a part number.
Chemical-Resistant Slippery PTFE 90° Angles
- Color: White
- Temperature Range: -350° to 500° F
- Tensile Strength: 2,170-2,800 psi (Poor)
- Impact Strength: 3.5 ft.-lbs./in. (Good)
- Hardness: Durometer 52D-55D (Medium Soft)
- For Use Outdoors: Yes
- Specifications Met: FDA Compliant 21 CFR 177.1550, SAE AMS3671, ASTM D1710, UL 94 V-0
Often used as guide rails and with parts that slide, these 90° angles have a slippery surface that prevents sticking. PTFE surpasses most plastic when it comes to chemical resistance and performance in extreme temperatures. It’s also an excellent electrical insulator and easy to machine.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wall Thick. | Wall Thick. Tolerance | Ht. | Ht. Tolerance | Wd. | Ht. | Wd. | Lengths, ft. | Per Ft. | |
| 1/16" | 0.000" to 0.015" | 1/2" | -0.05" to 0.05" | 1/2" | 7/16" | 7/16" | 0000000 | 000000 | |
| 1/16" | Not Rated | 3/4" | Not Rated | 3/4" | 11/16" | 11/16" | 0000000 | 00000 | |
| 1/8" | 0.000" to 0.015" | 1" | -0.05" to 0.05" | 1" | 7/8" | 7/8" | 0000000 | 00000 | |
| 1/8" | Not Rated | 1 1/4" | Not Rated | 1 1/4" | 1 1/8" | 1 1/8" | 0000000 | 00000 | |
| 1/4" | 0.000" to 0.015" | 1 1/2" | -0.05" to 0.05" | 1 1/2" | 1 1/4" | 1 1/4" | 0000000 | 00000 | |
| 1/4" | Not Rated | 1 3/4" | Not Rated | 1 3/4" | 1 1/2" | 1 1/2" | 0000000 | 00000 | |
| 1/4" | 0.000" to 0.015" | 2" | -0.05" to 0.05" | 2" | 1 3/4" | 1 3/4" | 0000000 | 00000 | |