Use this rubber tape to splice cable in high-voltage applications.

Also known as mastic tape, this tape is thicker than other electrical tape to cushion, insulate, and seal out moisture and environmental contaminants in electrical connections.

No need for adhesive—this tape fuses to itself for a permanent seal and stretches to fit virtually any form. Also known as cold shrink tape.

This traditional black cotton electrician's tape provides an abrasion-resistant shield for wrapping low-voltage splices.

Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.

At only 0.0025" thick, this tape combines conformability with durability and abrasion resistance.

Twice as thick as our standard antistatic electrical tape, this tape is made of abrasion-resistant aramid and antistatic PTFE.

Patch and seal roofs, window frames, gutters, and vents with this conformable tape.

Use this tape for a watertight bond on gutters, roofing membranes, and other building materials.

The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.

Tape is cut into convenient discs and rectangles.

Repair ceiling tiles and pass-through windows in clean rooms with this foam tape with adhesive on both sides.

Often used to install carpet, padding, and linoleum.

This thin paper tape has a high-bond adhesive on both sides that sticks to glossy surfaces and hard-to-bond plastics.

Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.

This tape has a high-tack adhesive that bonds quickly to rough surfaces such as wood, plaster, stucco, brick, metal, and cement.

This flexible, multipurpose tape offers water resistance with excellent adhesion.

It has the look of foil, but this polyethylene-coated cloth tape is more conformable so it won't twist or curl.

Seal and mask rough surfaces such as concrete and stucco with this tape. The adhesive removes cleanly, even after long-term exposure to moisture and UV light.

Fiberglass fibers run along the length of this general purpose strapping tape.

Twice as strong as our standard reinforced strapping tape for extra-heavy loads. Fiberglass fibers run along the length.

Secure doors and panels during shipping. This tape sticks to plastic, metal, and glass without leaving residue behind.

This tape forms a stronger bond than our other packaging tape.

Made of chemical-resistant PVC, this tape securely seals packages in harsh environments.

Bond the shorter, softer fibers of recycled cardboard with the specially formulated adhesive on this tape.

Seal boxes with rough or challenging surfaces, such as corrugated and printed cardboard.

This tape has an aggressive adhesive that adheres to super-slick surfaces, such as plastic and nylon.

Seal foil-jacketed insulation as well as air-conditioning and refrigeration systems with this conformable aluminum tape.

Reinforced with fiberglass, this tape is flexible yet resists tearing. Use it for sealing and patching insulation and duct.

This uncoated tape is thinner and more conformable than our other repair tape to reinforce irregular shapes.

A layer of foil inside this tape will set off metal detectors if it falls into your food processing line, alerting you to the contamination.

This tubular foam tape compresses to fill the gaps around door jambs and other openings that flat masking tape can't.

Use this crepe paper tape for sharp paint lines.

A high-tack adhesive on one side of this crepe paper tape sticks to plastic sheeting, and a clean-release adhesive on the other side prevents surface damage. Also known as containment tape.

Only one edge of this kraft paper tape has adhesive. Apply the sticky side along edges and molding, and the other edge sticks out to catch drips.

Made of polyester plastic, this tape resists tearing in high-temperature masking jobs, such as on circuit boards and when powder coating.

In addition to handling temperatures up to 500° F, this fiberglass tape is tough enough for abrasive applications such as sand blasting.

Protect screen-printed graphics during high-temperature laminating and molding.

Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.

This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.

Protect labels from moisture, oil, solvents, alkalies, and most acids.

Providing all-weather corrosion protection, this vinyl tape resists salt water, UV light, acids, and alkalies. Use it to wrap pipes and electrical conduit both above and below ground.

Made of pinhole-free crepe paper to seal out light. It is often used in photo processing labs.

A strong, thick layer of Teflon® PTFE makes this tape tougher than standard Low-Friction Tape Made with Teflon® PTFE.

This tape provides a slick surface along with excellent resistance to electrical current.

Our most slippery tape, the slick surface allows items to glide smoothly over it.

Fiberglass is laminated with Teflon® PTFE for a slippery, durable tape with excellent chemical and temperature resistance. Use it as a release surface on heat sealers and blister forming equipment.

Use this slippery PTFE-coated tape for a smooth release on heat sealers and molds.

Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.

Wrap this tape tightly around pipe and other surfaces to seal cracks and joints without having to shut down your system.