We will reply to your message within an hour.
More
Let go of this hose and it will spring back out of your way.
If you’re tight on storage space, this hose compresses down to a small size.
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.
Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.
A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.
The neoprene coating on this hose holds up under high heat.
In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.
Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.
The small bend radius makes this hose easy to wrap around corners and install in tight spaces.
A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).
The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.
A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.
A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.
Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.
Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).
SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.
Hose has a plastic spiral that acts as a wear strip to protect against damage.
The strongest nonmetal duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.
A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.
The neoprene coating on this hose withstands continuous motion without weakening.
Don’t worry about crushing this hose if you step on it—it has a flexible plastic spiral that springs back to its original shape.
Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.
Hose meets UL 94 V-2 for flame retardance.
Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.
The hose’s embedded metal spiral along with carbon-filled fittings divert static electricity when hose is grounded and used with a metal suction tube.
Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.
These short lengths of hose have a collar on each end to prevent the clamp from slipping off. FDA compliant for direct contact with food, they’re often used to move rice and grain.
Run water, mist, oil, and other liquids through this hose.
If your liquid contains some solid particles, this tough EPDM rubber hose can handle the extra abrasion.
These cable ramps handle heavy pedestrian and equipment traffic.
Use in areas with light pedestrian traffic.
Lay your cable in the slit on the top so it stays off the floor.
Multiple channels let you separate different types of cable and cords.
Wrap this sleeving around cable, cords and wires to protect them and to form bundles.
Organize and protect the cables on your Universal Robots arm without hindering its movement.
Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.
A mica and silicone rubber blend allows this sleeving to withstand intermittent heat up to 2100° F. It can be quickly applied to hose or cable like tape, so it’s a good option for emergency patches.
Made of neoprene rubber, this sleeving has excellent abrasion resistance. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.
Also known as clevis hangers, these have a pivoting loop that adjusts for line movement and vibration. Combine with a threaded rod or other fastener to hang from the ceiling.
Connect these hangers to organize multiple lines of pipe, tubing, and conduit. The tight-fitting, santoprene body reduces vibration and prevents corrosion caused by metal-to-metal contact.
These fiberglass-reinforced polyurethane U-bolts have no metal parts, so they won't conduct electricity or cause metal-to-metal corrosion.
Slide these seals over roof flashings for added protection and to create an extra-watertight seal without the need for caulk. They’re also known as storm or rain collars.
Heat PVC conduit and pipe, then manually bend it to your desired angle.