Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.

Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.

These zinc-rich coatings offer the protection of hot-dip galvanizing to keep iron and steel free of rust and corrosion.

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.

Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.

Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.

Temporarily stabilize objects on flat surfaces with this clear, reusable adhesive.

This silicone glue withstands temperatures up to 500° F.

Also known as Gorilla Glue, this glue expands to form stronger bonds than other glue.

Use these adhesives to bond lumber and plywood.

Bond glass and stone to drywall, treated lumber, and subfloors.

Rubber cement allows repositioning until fully dried. Use it on paper and cardboard.

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

These spray glues adhere quickly.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

These adhesives resist temperatures up to 500° F.

The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.