We will reply to your message within an hour.
Attach barbed fittings to this hose for use in low-pressure air applications.
Designed for areas where space is limited, these reels have the smallest overall size of all our reels.
Protect your hose when it’s not in use.
Identify your air lines by color.
An extra-strong yarn reinforcement gives this hose excellent durability to handle higher pressures than standard air hose.
Transfer compressed air that’s up to 500 psi—this hose has extra-strong yarn reinforcement for excellent durability.
The rubber cover meets MSHA (Mine Safety and Health Administration) standards for flame resistance, so this hose is often used to transfer highly compressed air in robotic welding systems.
Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.
Prevent electrostatic discharge (ESD) while moving compressed air in dry environments, such as when powder coating or spray painting.
Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F.
Hose is polyurethane so it stretches and flexes more than nylon retracting hose.
Bend this hose around obstructions and corners, and the aluminum tube reinforcement holds its shape.
Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.
A female fitting on one end swivels until tightened, making it easy to install without rotating the entire hose.
Made of polyurethane, this hose stands up to the wear and tear of daily use.
Use this neoprene hose in temperatures up to 210° F.
Bend this hose in any direction and it won’t kink, even when routed through tight spaces.
Also known as air brake hose, this hose safely powers brakes in semitrucks, trailers, and other vehicles with compressed air.
The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.
Sockets accommodate five common plug shapes: Industrial, ARO, Lincoln, Tru-Flate, and European.
Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.
Couplings allow for maximum flow because there's no shut-off valve in the plug or the socket. Compatible with Open-Flow-shape plugs and sockets.
Compatible with ARO-shape plugs and sockets.
Compatible with Schrader-shape plugs and sockets.
With an unobstructed air path, these couplings have better airflow than other coupling shapes of the same size. Compatible with European-shape plugs and sockets.
Compatible with Japanese-shape plugs and sockets.
A slim body allows these couplings to fit into tight spaces. Compatible with Compact-shape plugs and sockets.
Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.
Couplings have an identical claw-style head that connects to another twist-claw hose coupling with a quarter twist.
Couplings have a spring-loaded locking sleeve that automatically locks into place to prevent accidental disconnection. The identical claw-style head connects to another spring-lock twist-claw hose coupling with a quarter twist.
Also known as Thor couplings, these have two locking points to give you twice the gripping power of standard grip-lock couplings. They consist of a plug and a socket that connect with a quarter twist.
These couplings have a lower profile than other claw-style couplings to fit in cramped spaces. They consist of a plug and a socket that connect with a quarter twist. Also known as Bowes couplings.
Metal hose fittings have better durability than plastic barbed hose fittings.
Eliminate sharp bends at the end of your air and water hose—these fittings have a built-in kink absorber.
Fittings are metal for better durability than plastic barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.
Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.
Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.
The female connector screws directly onto the hose without the need for a separate adapter. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose.
Commonly used in low-pressure welding applications, these fittings connect downstream of your pressure regulator. Slide the barbed end into hose and secure with a crimp-on hose ferrule.
Create or repair D.O.T. hose assemblies in the field with just a wrench and a vise, no crimper required.
With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.
Multiple colors allow you to color-code your line for easy identification.
A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.
Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.
This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.
Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.
Static electricity will not build up in this tubing, so you can use it near sensitive equipment.
This tubing won’t degrade when exposed to the damaging effects of UV light.
Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.
Stretch it, bend it, compress it – this tubing will spring back to its original shape.
Use this tubing in high-temperature applications up to 390° F.
Thick walls give this tubing excellent abrasion resistance.
Lightweight, spongy walls provide thermal insulation, so this tubing won’t produce condensation when cold air or fluid runs through it.
This self-extinguishing tubing meets UL 94 V-0 and UL 94 V-1 for flame retardance, so it delays the spread of flames to valuable equipment.
Designed for high-purity processes, this tubing is made without plasticizers like DEHP that can contaminate the fluid passing through it.
Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.
A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.
Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.
A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.