Hand Vises for Round Material
Notches on the jaws hold round material on its outside diameter. Each set of notches holds a different diameter. Turn the thumbscrew to adjust the jaws.
Jaw | Overall | |||||||
|---|---|---|---|---|---|---|---|---|
| For Dia. | Wd. | Material | Texture | Lg. | Ht. | Body Material | Each | |
| 1/2"-1 3/8" | 1 1/4" | Brass | Smooth | 1 7/8" | 1" | Brass | 0000000 | 000000 |
Hand Vises for Irregularly Shaped Material
Arrange the pins in a series of holes to grip parts with angled or uneven sides. Turn the thumbscrew to adjust the jaws.
Jaw | Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Dia. | Wd. | Material | Texture | Throat Dp. | Lg. | Ht. | Body Material | No. of Pins | Each | |
| 2 1/4" | 1 7/8" | Aluminum | Smooth | 3/8" | 5 1/4" | 3 1/8" | Wood | 8 | 0000000 | 000000 |
Hollow-Body Pin Vise Sets
Set includes four vises with different opening sizes. Pass wires and rods through the hollow body; turn the collar to close the collet around the material.
Jaw | Overall | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Max. Opening | Min. Opening | Material | Texture | Dia. | Lg. | Body Material | Container Type | Each | |
| 0.055" 0.075" 0.125" 0.187" | 0" 0.025" 0.045" 0.11" | Steel | Serrated | 5/16" 3/8" 7/16" 9/16" | 3 1/8" 3 1/2" 3 13/16" 4" | Steel | Plastic Pouch | 0000000 | 000000 |
Hollow-Body Pin Vises
Pass wires and rods through the hollow body of these vises. Turn the collar to close the collet around the material.
Two-Tip Hollow-Body Pin Vises
Each end of the vise has a collet to hold a different tool—turn the collar to close the collets around them. Wires and rods can pass through the hollow body.
Jaw | Overall | ||||||
|---|---|---|---|---|---|---|---|
| Max. Opening | Material | Texture | Dia. | Lg. | Body Material | Each | |
| 0.013", 0.125" | Steel | Serrated | 7/16" | 3 5/8" | Steel | 0000000 | 000000 |
Quick-Clamping Hollow-Body Pin Vises
Clamp and unclamp with one hand by sliding the knurled ring forward to close the collet. Wires and rods can pass through the hollow body.
Jaw | Overall | ||||||
|---|---|---|---|---|---|---|---|
| Max. Opening | Material | Texture | Dia. | Lg. | Body Material | Each | |
| 0.051" | Steel | Smooth | 5/16" | 4 1/8" | Aluminum | 0000000 | 000000 |
Precise-Control Pin Vises
Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the vise with your fingertips. Turn the collar to close the collet around the material.
Jaw | Overall | ||||||
|---|---|---|---|---|---|---|---|
| Max. Opening | Material | Texture | Dia. | Lg. | Body Material | Each | |
| 0.125" | Steel | Serrated | 3/8" | 3 3/4" | Aluminum | 0000000 | 000000 |
Cushion-Grip Precise-Control Pin Vises
A rubber-covered body provides a comfortable grip. Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the vise with your fingertips. Turn the collar to close the collet around the material.
Jaw | Overall | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Max. Opening | Material | Texture | Dia. | Lg. | Body Material | Grip Material | Features | Each | |
| 0.125" | Steel | Smooth | 7/8" | 4 1/4" | Plastic | Rubber | Drill and Tap Storage in Body | 000000 | 000000 |
Squeeze-to-Open Hand Vises
Squeeze the body to open the flat jaws; release to grip.
For technical drawings and 3-D models, click on a part number.
Bench-Mount Pipe Vises
Hold pipe, tubing, and conduit for cutting and threading.
Chain-style vises have jaws on the base. Crank the handle to tighten the chain, securing the object against the jaws.
Yoke-style vises have top and bottom jaws—turn the handle to clamp the object between them. They have a hinged side opening with a locking latch. You can reverse the yoke to open on the left or right. Yoke style is not recommended for plastic pipe.
Jaw | Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Pipe Size | For Dia. | Material | Texture | Body Material | Mounting Fasteners Included | No. of | Dia. | Each | |
Chain Style | |||||||||
| 1/8-2 1/2 | 13/32"-2 7/8" | Steel | Serrated | Iron | No | 3 | 13/32" | 0000000 | 0000000 |
| 1/8-4 | 13/32"-4 1/2" | Steel | Serrated | Iron | No | 3 | 9/16" | 0000000 | 000000 |
| 1/8-5 | 13/32"-5.563" | Steel | Serrated | Iron | No | 3 | 13/32" | 0000000 | 000000 |
| 1/4-6 | 35/64"-6 5/8" | Steel | Serrated | Iron | No | 3 | 9/16" | 0000000 | 000000 |
| 1/2-8 | 27/32"-8 5/8" | Steel | Serrated | Iron | No | 3 | 9/16" | 000000 | 000000 |
| 1 to 12 | 1 5/16"-12 3/4" | Steel | Serrated | Iron | No | 3 | 11/16" | 0000000 | 00000000 |
Yoke Style | |||||||||
| 1/8-2 | 13/32"-2 3/8" | Steel | Serrated | Iron | No | 3 | 13/32" | 000000 | 000000 |
| 1/8-2 1/2 | 13/32"-2 7/8" | Steel | Serrated | Iron | No | 3 | 17/32" | 000000 | 000000 |
| 1/8-3 1/2 | 13/32"-4" | Steel | Serrated | Iron | No | 3 | 17/32" | 000000 | 000000 |
| 1/8-4 1/2 | 13/32"-5" | Steel | Serrated | Iron | No | 3 | 11/16" | 000000 | 000000 |
| 1/4-6 | 35/64"-6 5/8" | Steel | Serrated | Iron | No | 3 | 21/32" | 000000 | 00000000 |
| 1-8 | 1 5/16"-8 5/8" | Steel | Serrated | Iron | No | 4 | 25/32" | 000000 | 00000000 |
| 1 1/2-12 | 1 29/32"-12 3/4" | Steel | Serrated | Iron | No | 5 | 25/32" | 000000 | 00000000 |
Nonmarring Bench-Mount Pipe Vises
Rubber-coated jaws prevent damage to your workpiece. These vises hold pipe, tubing, and conduit for cutting and threading. Crank the handle to tighten the chain, securing the object against the jaws on the base.
Jaw | Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Pipe Size | For Dia. | Material | Texture | Body Material | Mounting Fasteners Included | No. of | Dia. | Each | |
Chain Style | |||||||||
| 1/8-4 | 1/2"-4 1/2" | Rubber-Coated Steel | Serrated | Iron | No | 3 | 17/32" | 0000000 | 0000000 |
Freestanding Pipe Vises for Clean Rooms
Keep clean rooms free of contaminants. These vises have rubber-covered jaws that prevent metal-to-metal contact and a plastic-encased chain that seals in lubrication. Set up the tripod to hold pipe, tubing, and conduit for cutting and threading. Crank the handle to tighten the chain, securing the object against the jaws on the base.
Jaw | |||||||
|---|---|---|---|---|---|---|---|
| For Pipe Size | For Dia. | Material | Texture | Body Material | Base Material | Each | |
Chain Style | |||||||
| 1/8-6 | 13/32"-6 5/8" | 410 Stainless Steel, Rubber-Coated 410 Stainless Steel | Serrated/Smooth | Iron | Aluminum | 000000 | 0000000 |
Freestanding Pipe Vises
Set up the tripod wherever you need to hold pipe, tubing, and conduit for cutting and threading.
Chain-style vises have jaws on the base. Crank the handle to tighten the chain, securing the object against the jaws.
Yoke-style vises have top and bottom jaws—turn the handle to clamp the object between them. They have a hinged side opening with a locking latch. You can reverse the yoke to open on the left or right. Yoke style is not recommended for plastic pipe.
Jaw | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Pipe Size | For Dia. | Material | Texture | Body Material | Base Material | Features | Each | |
Chain Style | ||||||||
| 1/8-2 1/2 | 13/32"-2 7/8" | Steel | Serrated | Iron | Steel | __ | 000000 | 0000000 |
| 1/8-6 | 13/32"-6 5/8" | Steel | Serrated | Iron | Aluminum | __ | 000000 | 000000 |
| 1/8-12 | 13/32"-12 5/8" | Steel | Serrated | Aluminum | Steel | Leveling Leg | 0000000 | 000000 |
Yoke Style | ||||||||
| 1/8-2 1/2 | 13/32"-2 7/8" | Steel | Serrated | Iron | Aluminum | __ | 000000 | 000000 |
Adjustable-Angle Milling-Machine Vise Jaws
Arrange the included pins in a series of holes to position a part at any angle and hold odd-shaped parts securely.
For technical drawings and 3-D models, click on a part number.
Jaw | Pin | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Ht. | Thick. | Thick. Tolerance | Material | Dia. | Dia. Tolerance Range | Workholding Angle | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Includes | Pair | |
| 6" | 1 3/4" | 0.725" | -0.0008" to 0.0008" | Steel | 1/4" | -0.0007" to 0.0007" | 5°, 10°, 15°, 20°, 25°, 30°, 45° | No | 17/32" | 3 7/8" | 1/2"-13 | Four 7/8" Lg. Pins Three 1 19/32" Lg. Pins Three 2 9/32" Lg. Pins Three 3" Lg. Pins | 0000000 | 0000000 |
Dovetail Milling-Machine Vises
Designed to hold parts on 4- and 5-axis milling machines, these vises provide rigid clamping while exposing five full sides of the workpiece. This allows even complex parts to be completed in a single operation.
Vises require a dovetail and locating slot to be cut into the bottom side of your material. The dovetail-shaped jaws grip the matching dovetail in your material for consistent locating and high repeatability. Use a Carbide Dovetail End Mill to cut dovetail notches into your material.
While the vises can be mounted directly to some machines or rotary tables, most will require an adapter plate.
Adapter plates have a variety of slots for mounting compatibility with the majority of milling machines and rotary tables.
Risers raise the vise off a machine or rotary table. Risers are compatible with the adapter plates.
For technical drawings and 3-D models, click on a part number.
For Max. Workpiece | Dovetail | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Weight, lbs. | Ht. | Angle | Dia. | Lg. | Wd. | Overall Ht. | Body Material | Clamp Material | Mounting Fasteners Included | Each | |
| 5 13/16" | 5 13/16" | 5 13/16" | 18 | 1/8" | 60° | 4.97" | __ | __ | 3" | Aluminum | Stainless Steel | Yes | 000000 | 0000000 |
| 6 3/4" | 6 3/4" | 6 3/4" | 30 | 1/8" | 60° | 4.97" | __ | __ | 3" | Aluminum | Stainless Steel | Yes | 000000 | 00000000 |
| 8" | 10" | 10" | 80 | 3/16" | 60° | __ | 5.95" | 5" | 2 1/2" | Aluminum | Stainless Steel | Yes | 000000 | 00000000 |
Dovetail | Slots | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Ht. | Angle | No. of | Lg. | Wd. | Temp. Range, °F | Each | |
6061 Aluminum | ||||||||||
3/4" Wide Dovetail | ||||||||||
| 3 1/4" | 3 1/4" | 3 1/4" | 1/8" | 60° | 1 | 13/32" | 9/32" | -320° to 300° | 0000000 | 0000000 |
| 5 13/16" | 5 13/16" | 5 13/16" | 1/8" | 60° | 1 | 13/32" | 9/32" | -320° to 300° | 0000000 | 000000 |
1 1/2" Wide Dovetail | ||||||||||
| 4" | 4" | 4" | 1/8" | 60° | 1 | 15/32" | 9/32" | -320° to 300° | 0000000 | 000000 |
2 1/4" Wide Dovetail | ||||||||||
| 7" | 7" | 5" | 3/16" | 60° | 2 | 11/16" | 5/16" | -320° to 300° | 0000000 | 000000 |
| 8" | 10" | 10" | 3/16" | 60° | 2 | 11/16" | 5/16" | -320° to 300° | 0000000 | 000000 |