Use these rotating joints to transfer high-temperature materials from your supply line. They have a rotating shaft with threads on one end that connect to a continuously revolving drum, roller, or other rotating equipment. Joints are for one-way flow and are meant to be used in pairs—one joint serves as the supply line while the other serves as the return line.

If your drum rotates counterclockwise as you face the connecting end, you should select a rotating joint with right-handed threads.

For technical drawings and 3-D models, click on a part number.

These joints have a rotating shaft with threads on one end that connect to a continuously revolving drum, roller, or other rotating equipment. Use them to transfer hot and cold materials from your supply line. Joints are for one-way flow and are meant to be used in pairs—one joint serves as the supply line while the other serves as the return line. Joints are stainless steel for excellent resistance to corrosion caused by fluid flowing through them.

If your drum rotates counterclockwise as you face the connecting end, you should select a rotating joint with right-handed threads. If your drum rotates clockwise as you face the connecting end, you should select a rotating joint with left-handed threads.

For technical drawings and 3-D models, click on a part number.

These joints have a rotating shaft with threads on one end that connect to a continuously revolving drum, roller, or other rotating equipment. Use them to transfer hot and cold materials from your supply line. Joints are for one-way flow and are meant to be used in pairs—one joint serves as the supply line while the other serves as the return line. Joints are brass for good corrosion resistance. For steam applications use intermittently (up to 20% of operating time).

If your drum rotates counterclockwise as you face the connecting end, you should select a rotating joint with right-handed threads. If your drum rotates clockwise as you face the connecting end, you should select a rotating joint with left-handed threads.

For technical drawings and 3-D models, click on a part number.

Supply air to two different rotating objects from a stationary supply. The connections are sealed with an O-ring to allow different pressures and/or vacuum to be supplied simultaneously through the outlets.

For technical drawings and 3-D models, click on a part number.

These joints have a rotating shaft with threads on one end that connect to a continuously revolving drum, roller, or other rotating equipment. Use them to transfer hot and cold materials from your supply line. They are for two-way flow and are meant to be used when you need the supply line and the return line to be on the same side of your equipment. Joints are stainless steel for excellent resistance to corrosion caused by fluid flowing through them.

If your drum rotates counterclockwise as you face the connecting end, you should select a rotating joint with right-handed threads. If your drum rotates clockwise as you face the connecting end, you should select a rotating joint with left-handed threads.

For technical drawings and 3-D models, click on a part number.

These joints have a rotating shaft with threads on one end that connect to a continuously revolving drum, roller, or other rotating equipment. Use them to transfer hot and cold materials from your supply line. They are for two-way flow and are meant to be used when you need the supply line and the return line to be on the same side of your equipment. Joints are brass for good corrosion resistance. For steam applications use intermittently (up to 20% of operating time).

If your drum rotates counterclockwise as you face the connecting end, you should select a rotating joint with right-handed threads. If your drum rotates clockwise as you face the connecting end, you should select a rotating joint with left-handed threads.

For technical drawings and 3-D models, click on a part number.