We will reply to your message within an hour.
Grind, sand, finish, and polish with these versatile kits.
Grind, sand, finish, and polish workpieces.
Complete a wide range of cutting, grinding, and sanding tasks by pairing these accessories with your rotary tool.
Polish, deburr, and remove rust from metal surfaces such as tools, machine parts, and electrical contacts.
Turn Dremel rotary tools into miniature drill presses.
Convert your straight grinder into an angle grinder.
Swap out accessories on your Dremel without tools.
For engraving and carving, these kits contain a variety of Dremel-compatible bits and stones.
Swap accessories quickly and safely without tools.
Convert your rotary tool into a plunge router to route circles, route freehand, and cut decorative edges, straight slots, and inlay work.
Make controlled cuts in drywall, fiberglass, and laminate.
Sharpen, grind, and sand at accurate 45° and 90° angles with these rests.
Buff, polish, and clean with in these kits.
Protect yourself from sparks or flying debris when using your rotary tool.
Keep a variety of bits on hand for routing, inlaying, and mortising in wood and other soft materials.
Sharpen, deburr, and grind metal surfaces.
Shape and smooth wood, fiberglass, and rubber surfaces or remove rust from metal.
Convert your rotary tool into a small router table to slot, edge, groove, and sand items in both conventional and irregular shapes.
Attach these guides to your Dremel to cut circular holes in a variety of materials.
Mount these attachments to the nose of your Dremel to blow away dust and fine debris for better visibility when sanding, engraving, and carving.
Screw these hangers onto your workbench.
For fast accessory changes without any other tools, twist these wrenches to loosen and tighten the collet on your Dremel grinder.
The quick-change arbors in these kits allow you to easily swap accessories.
Free up a hand while using your Dremel on a workpiece.
Cut holes, slots, and shapes in workpieces.
Engrave, etch, carve, and polish with precise control. These grips shift the weight of your tool to your palm for a balanced feel and less fatigue.
Replace the brush and spring on your rotary tool.
Create stable, controlled cuts in tile or grout with a guide and bit that allow maximum visibility.
The bendable shaft with handpiece lets these grinders operate smoothly with less vibration, noise, and heat than other hand-held grinders.
Remove excess material and smooth workpieces with these tools, also known as die grinders.
Convert your bench-mount motor or drill to a flexible-shaft grinder.
Use these grinders for light, intermittent grinding, deburring, and finishing.
Kits include a light duty grinder and a variety of tools for intermittent grinding on most metals.
The lightweight, pencil-sized grinder in these kits works at high speeds and is more durable than light duty grinders, making it good for frequent use.
More durable than our Light Duty Grinders, these are designed for more frequent use.
High-quality bearings ensure long spindle life, even when grinders are used continuously.
Collect the dust, debris, and fine particulates you generate while grinding by attaching the plastic dust hood on these grinders to a vacuum system.
Also known as die grinders.
Use these grinders for occasional light grinding, deburring, and finishing.
Kit includes a light duty grinder and an assortment of tools for occasional grinding, deburring, and finishing.
With high-quality bearings and collets for long spindle life, these grinders are rated for continuous use to take on tough jobs.
A diamond abrasive that's bonded to a rubber cushioning makes these bits last 10 to 20 times longer than rubber-cushioned bits without diamond. Because they’re cushioned during grinding, these bits produce a smoother surface texture than other bits with similar grits.
The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.
The bits in these sets have rubber blended into the abrasive, which cushions during grinding to produce a smooth to extra-smooth surface texture.
Produce a smooth surface on precise, intricate grinding jobs.
Bits thread onto mounted shanks so you can quickly switch head shapes without removing the shank. The abrasive grains are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.
The abrasive grains in these discs are blended with rubber, which cushions during grinding to produce a smoother surface texture than other discs with similar grits. Discs attach to your grinder with a shank.
Similar to diamond, boron nitride is harder than aluminum oxide and lasts longer. Bits are also known as jig grinding pins and mandrels.
Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.
Each set contains a selection of our most popular grinding bits.
Made of ceramic alumina, these bits prevent material and heat buildup better than bits made of boron nitride and aluminum oxide when used on steel, stainless steel, iron, and titanium.
Sets contain an assortment of tools for grinding, sanding, and cutting on small surface areas.
Set contains a selection of our most popular hex-shank grinding bits. Use them in any drill chuck that accepts a 1/4" hex shank.
Use bits in any drill chuck that accepts a 1/4" hex shank.
Bits are specially formulated to stay cool during grinding, so they won’t mar or discolor stainless steel.
Made of cotton fiber layers embedded with aluminum-oxide grains, these bits grind and finish in one step.
The small 3/32" diameter shank and small head makes these bits good for precise and intricate jobs.
Almost as hard as diamond, these tungsten carbide bits cut through nonmetals without generating heat.
Best for grinding composites, fiberglass, plaster, plastic, rubber, and wood without generating heat, these sets include a selection of our most popular tungsten carbide bits.
Made with diamond abrasive, these bits are extremely hard and last longer than tungsten carbide. They have a small shank and head for precise and intricate jobs.
The diamond abrasive in these bits is extremely hard and lasts longer than tungsten carbide. For longer tool life and improved finish, use a water- or oil-soluble mist or coolant.
Finish the edges of metal, polymer, and plastic 3D printed parts with the bits, burs, wheels, and brushes in these kits.
Grind a variety of materials, from metal to ceramic and plastic, in precise, detailed jobs.
Best for intricate, precise grinding jobs on metal, ceramic, and plastic, these sets include diamond abrasive bits with different head shapes.
The diamond abrasive in these bits is extremely hard and can grind metal, ceramic, and plastic.
Pair with Dremel rotary tools to securely grip bits and burs.
Attach cutoff wheels to a Dremel grinder.
Attach cutoff wheels, grinding wheels, and other abrasive wheels to hand-held drills and die grinders.
Thread rubber-cushioned grinding bits onto one of these arbors to use them in drills and die grinders.
This drum is required to use a sanding sleeve with a Dremel grinder.
No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum.
Slide a sanding sleeve on the drum and tighten the nut or screw to securely hold the sleeve.
Slide a flap sanding sleeve on the drum and twist the drum by hand to secure the sleeve.
The shank on these spindles installs directly into grinder collets and drill chucks.
A titanium aluminum nitride (TiAlN) coating provides heat and wear resistance for longer life.
Extend your reach with these 3" to 7¼" long burs.
Reach around barriers to cut, grind, shape, and remove sharp edges in hard-to-access spots.
Specially spaced flutes quickly remove materials such as aluminum, brass, bronze, and plastics without clogging.
Pointed teeth cut wood and rubber quickly without clogging.
Diamond-cut teeth effectively cut hard materials.
Extend your reach with these 6 1/4" to 7" long burs.
These bobs have a long-lasting diamond abrasive.
The silicon carbide abrasive cuts quickly with light pressure.
Polish small areas and hard-to-reach spots. Use in a drill or grinder for bits and burs.
Remove scratches from your workpiece with these hard bobs.
Remove minor scratches, scuffs, cloudy surfaces, and hard water etching from glass or plastic.
Loose layers of cloth conform to curves and contours.
Long, soft cotton strings conform to irregular surfaces and hold on to burring compounds longer than other wheels.
Layers of cloth are sewn together, making these wheels more rigid than those for curved surfaces.
Specially shaped to buff the insides of metal pipes, cylinders, stampings, and tapered objects.
Pleats hold more buffing compound so you can work longer before having to reapply. The cotton is also cut at an angle to prevent fraying and extend wheel life.
Holes in the hub allow air to flow through so the wheel stays cool and compound lasts longer. Also known as airway buffs.
A uniform density helps distribute abrasive grains evenly throughout these felt wheels for a more consistent surface polish.
Loose layers of cloth conform to curves and contours. Also known as jewelers’ buffs.
Softer than flat-surface wheels, these conform to curves and contours.
Use these rigid wheels to remove gouges and scratches from metal workpieces.
The layers of flannel are sewn together, making these wheels more rigid than those for curved surfaces. Also known as Canton flannel buffs.
The edge of the wheel is tapered for polishing joints, grooves, and crevices.
The layers of sisal are sewn together for maximum rigidity and resistance to fraying.
Made from alternating strips of cotton and sisal, these wheels remove less material, leave fewer scratches, and conform better to curves and contours than flat-surface wheels. Also known as finger-style buffs.
The abrasive is already embedded in these nylon mesh wheels so you don’t need messy polishing compounds.
A special fastener on the back of these flexible discs allows you to easily swap one disc for another. Use with a backup pad on grinders for bits and burs.
The wheel flares out as it spins for use on depressions and curved surfaces.
These bonnets won’t leave swirl marks or scratches when polishing waxed surfaces.
Shaped for use on inside cylinders or on irregular surfaces.
Washable and reusable, these pads are good for buffing and polishing painted and clear-coat finishes.
Made of loose layers of cotton.
Before you buff, use these bonnets for easy application of waxes and polishes.
Slip a cap onto the head of a shank and sand small, recessed, and hard-to-reach areas.
Choose a bit with the same angle as your countersink to debur the inside of the hole.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Keep a convenient mix of spiral-wound sanding rolls on hand. As the outer layer wears away, new abrasive is exposed.
Shape, debur, and sand edges and internal surfaces.
The premium abrasive stays sharp longer.
Assortments include a selection of sanding sleeves to shape, debur, and sand edges and internal surfaces.
A coating prevents dust and debris from building up on the abrasive surface. These sleeves shape, deburr, and sand edges and internal surfaces.
The tungsten carbide abrasive is extremely durable.
As the outer layer wears away, new abrasive is exposed.
Assortments include a variety of sanding drums and sleeves to shape, deburr, and sand edges and internal surfaces.
Flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces. They provide more control than a standard sanding sleeve but are more aggressive than a traditional flap wheel. As the flaps wear, new abrasive is exposed.
Sand inside pipes and tubes as well as on an angle to reach into corners and slots.
Assortments include a selection of flap wheels to polish, clean, and deburr deep inside tubes and cylinders.
Various sizes and grits of flap sanding wheels are included in these assortments. Secure the shank into the collet or chuck of your tool.
Secure the shank into the collet or chuck of your tool.
The flaps are slit into narrow strips to provide more flexibility than other flap wheels.
An additive in the abrasive resists heat.
The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
A coating prevents dust and debris from building up on the abrasive surface.
Polish, clean, and debur deep inside tubes and cylinders.
These assortments include various sizes and grits of flap sanding wheels. The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.
The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.
With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.
Fit these wheels over your tool's arbor. The flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces.
With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap wheels.
Use on delicate surfaces.
Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.
The small brush face can access hard-to-reach spots to remove light-to-medium rust and stains and small burs.
Removable bands around the bristles keep them from flaring and breaking. Adjust the bands to change bristle length.
The bristles are coated with a synthetic compound that keeps them stiff and straight so they last longer than standard brushes.
Use for tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. The small brush face can access hard-to-reach spots.
Clean delicate surfaces in hard-to-reach spots. Use these brushes to remove light-to-medium rust and stains and small burs.
The abrasive lasts longer than that of standard brushes.
Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step.
These brushes conform to corners, curves, and irregular surfaces to remove light-to-medium rust and stains and small burs.
The bristles are coated with a synthetic compound that keeps them stiff and straight so they’re more aggressive and last longer than standard brushes.
Use for tasks such as removing weld slag, heavy surface contamination, and large burs.
A special fastener on the back of these brushes allows you to easily swap one brush for another.
Use on contours and angles or for reaching into cracks and corners.
Rigid, partially twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. Also known as knot-wire brushes.
Clean delicate surfaces inside tubes, pipes, and holes.
Attach the shank to a handle or power tool.
Use for tasks such as removing weld slag, heavy surface contamination, and large burs from tubes, pipes, and holes.
Remove light-to-medium rust and stains and small burs from tubes, pipes, and holes.
Abrasive grains are embedded in the entire length of the bristles to remove workpiece material as well as surface contamination in a single step.
Bend these brushes through curved holes and reach into corners.
Bristles at the top of these brushes clean the bottom of closed-end holes.
These blades have a continuous edge with diamond grit to cut through ceramics.
The segmented edge on these blades is coated with diamond grit for cutting plastic.
Cut plastic, wood, and soft metal such as aluminum, brass, and copper.
A tungsten carbide grit edge cuts through abrasive materials such as composites and fiberglass.
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Made of diamond abrasive, these wheels cut ceramics, tile, and other abrasive materials.
A ceramic alumina abrasive cuts through stainless steel.
Use these wheels for cutting soft metal, plastic, stone, and wood.
Power Dremel tools with these batteries.
Restore power to batteries for Dremel tools.