We will reply to your message within an hour.
Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.
The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.
The bits in these sets have rubber blended into the abrasive, which cushions during grinding to produce a smooth to extra-smooth surface texture.
Bits thread onto mounted shanks so you can quickly switch head shapes without removing the shank. The abrasive grains are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.
The abrasive grains in these discs are blended with rubber, which cushions during grinding to produce a smoother surface texture than other discs with similar grits. Discs attach to your grinder with a shank.
A diamond abrasive that's bonded to a rubber cushioning makes these bits last 10 to 20 times longer than rubber-cushioned bits without diamond. Because they’re cushioned during grinding, these bits produce a smoother surface texture than other bits with similar grits.
Produce a smooth surface on precise, intricate grinding jobs.
The small 3/32" diameter shank and small head makes these bits good for precise and intricate jobs.
Each set contains a selection of our most popular grinding bits.
Bits are specially formulated to stay cool during grinding, so they won’t mar or discolor stainless steel.
Set contains a selection of our most popular hex-shank grinding bits. Use them in any drill chuck that accepts a 1/4" hex shank.
Use bits in any drill chuck that accepts a 1/4" hex shank.
Made of ceramic alumina, these bits prevent material and heat buildup better than bits made of boron nitride and aluminum oxide when used on steel, stainless steel, iron, and titanium.
Similar to diamond, boron nitride is harder than aluminum oxide and lasts longer. Bits are also known as jig grinding pins and mandrels.
Made of cotton fiber layers embedded with aluminum-oxide grains, these bits grind and finish in one step.
Sets contain an assortment of tools for grinding, sanding, and cutting on small surface areas.
The diamond abrasive in these bits is extremely hard and lasts longer than tungsten carbide. For longer tool life and improved finish, use a water- or oil-soluble mist or coolant.
Almost as hard as diamond, these tungsten carbide bits cut through nonmetals without generating heat.
Best for grinding composites, fiberglass, plaster, plastic, rubber, and wood without generating heat, these sets include a selection of our most popular tungsten carbide bits.
Made with diamond abrasive, these bits are extremely hard and last longer than tungsten carbide. They have a small shank and head for precise and intricate jobs.
Finish the edges of metal, polymer, and plastic 3D printed parts with the bits, burs, wheels, and brushes in these kits.
The diamond abrasive in these bits is extremely hard and can grind metal, ceramic, and plastic.
Grind a variety of materials, from metal to ceramic and plastic, in precise, detailed jobs.
Best for intricate, precise grinding jobs on metal, ceramic, and plastic, these sets include diamond abrasive bits with different head shapes.
Keep a variety of bits on hand for routing, inlaying, and mortising in wood and other soft materials.
Sharpen, deburr, and grind metal surfaces.
Swap out accessories on your Dremel without tools.
Swap accessories quickly and safely without tools.
Shape and smooth wood, fiberglass, and rubber surfaces or remove rust from metal.
Complete a wide range of cutting, grinding, and sanding tasks by pairing these accessories with your rotary tool.
Buff, polish, and clean with in these kits.
Cut holes, slots, and shapes in workpieces.
The quick-change arbors in these kits allow you to easily swap accessories.
For fast accessory changes without any other tools, twist these wrenches to loosen and tighten the collet on your Dremel grinder.
For engraving and carving, these kits contain a variety of Dremel-compatible bits and stones.
A titanium aluminum nitride (TiAlN) coating provides heat and wear resistance for longer life.
Extend your reach with these 3" to 7¼" long burs.
Reach around barriers to cut, grind, shape, and remove sharp edges in hard-to-access spots.
Diamond-cut teeth effectively cut hard materials.
Specially spaced flutes quickly remove materials such as aluminum, brass, bronze, and plastics without clogging.
Pointed teeth cut wood and rubber quickly without clogging.
Extend your reach with these 6 1/4" to 7" long burs.
Shape, debur, and sand edges and internal surfaces.
The premium abrasive stays sharp longer.
Assortments include a selection of sanding sleeves to shape, debur, and sand edges and internal surfaces.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
A coating prevents dust and debris from building up on the abrasive surface. These sleeves shape, deburr, and sand edges and internal surfaces.
The tungsten carbide abrasive is extremely durable.
Assortments include a variety of sanding drums and sleeves to shape, deburr, and sand edges and internal surfaces.
Flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces. They provide more control than a standard sanding sleeve but are more aggressive than a traditional flap wheel. As the flaps wear, new abrasive is exposed.
Slip a cap onto the head of a shank and sand small, recessed, and hard-to-reach areas.
Choose a bit with the same angle as your countersink to debur the inside of the hole.
Sand inside pipes and tubes as well as on an angle to reach into corners and slots.
Keep a convenient mix of spiral-wound sanding rolls on hand. As the outer layer wears away, new abrasive is exposed.
As the outer layer wears away, new abrasive is exposed.
Secure the shank into the collet or chuck of your tool.
Various sizes and grits of flap sanding wheels are included in these assortments. Secure the shank into the collet or chuck of your tool.
The flaps are slit into narrow strips to provide more flexibility than other flap wheels.
An additive in the abrasive resists heat.
The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
A coating prevents dust and debris from building up on the abrasive surface.
These assortments include various sizes and grits of flap sanding wheels. The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.
The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.
With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.
Fit these wheels over your tool's arbor. The flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces.
Polish, clean, and debur deep inside tubes and cylinders.
Assortments include a selection of flap wheels to polish, clean, and deburr deep inside tubes and cylinders.
With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap wheels.
The silicon carbide abrasive cuts quickly with light pressure.
These bobs have a long-lasting diamond abrasive.
Polish small areas and hard-to-reach spots. Use in a drill or grinder for bits and burs.
Remove scratches from your workpiece with these hard bobs.
Remove minor scratches, scuffs, cloudy surfaces, and hard water etching from glass or plastic.
A special fastener on the back of these flexible discs allows you to easily swap one disc for another. Use with a backup pad on grinders for bits and burs.
Washable and reusable, these pads are good for buffing and polishing painted and clear-coat finishes.
The wheel flares out as it spins for use on depressions and curved surfaces.
Before you buff, use these bonnets for easy application of waxes and polishes.
These bonnets won’t leave swirl marks or scratches when polishing waxed surfaces.
Shaped for use on inside cylinders or on irregular surfaces.
Made of loose layers of cotton.
The abrasive is already embedded in these nylon mesh wheels so you don’t need messy polishing compounds.
A uniform density helps distribute abrasive grains evenly throughout these felt wheels for a more consistent surface polish.
The layers of flannel are sewn together, making these wheels more rigid than those for curved surfaces. Also known as Canton flannel buffs.
The edge of the wheel is tapered for polishing joints, grooves, and crevices.
Loose layers of cloth conform to curves and contours. Also known as jewelers’ buffs.
The layers of sisal are sewn together for maximum rigidity and resistance to fraying.
Pleats hold more buffing compound so you can work longer before having to reapply. The cotton is also cut at an angle to prevent fraying and extend wheel life.
Holes in the hub allow air to flow through so the wheel stays cool and compound lasts longer. Also known as airway buffs.
Long, soft cotton strings conform to irregular surfaces and hold on to burring compounds longer than other wheels.
Made from alternating strips of cotton and sisal, these wheels remove less material, leave fewer scratches, and conform better to curves and contours than flat-surface wheels. Also known as finger-style buffs.
Layers of cloth are sewn together, making these wheels more rigid than those for curved surfaces.
Softer than flat-surface wheels, these conform to curves and contours.
Specially shaped to buff the insides of metal pipes, cylinders, stampings, and tapered objects.
Loose layers of cloth conform to curves and contours.
Use these rigid wheels to remove gouges and scratches from metal workpieces.
This drum is required to use a sanding sleeve with a Dremel grinder.
No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum.
Slide a sanding sleeve on the drum and tighten the nut or screw to securely hold the sleeve.
Slide a flap sanding sleeve on the drum and twist the drum by hand to secure the sleeve.
Thread rubber-cushioned grinding bits onto one of these arbors to use them in drills and die grinders.
Attach cutoff wheels to a Dremel grinder.
Attach cutoff wheels, grinding wheels, and other abrasive wheels to hand-held drills and die grinders.
The shank on these spindles installs directly into grinder collets and drill chucks.
Clean delicate surfaces in hard-to-reach spots. Use these brushes to remove light-to-medium rust and stains and small burs.
Removable bands around the bristles keep them from flaring and breaking. Adjust the bands to change bristle length.
The small brush face can access hard-to-reach spots to remove light-to-medium rust and stains and small burs.
The abrasive lasts longer than that of standard brushes.
Use for tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. The small brush face can access hard-to-reach spots.
The bristles are coated with a synthetic compound that keeps them stiff and straight so they last longer than standard brushes.
These brushes conform to corners, curves, and irregular surfaces to remove light-to-medium rust and stains and small burs.
The bristles are coated with a synthetic compound that keeps them stiff and straight so they’re more aggressive and last longer than standard brushes.
Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step.
Use on delicate surfaces.
Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.
Use for tasks such as removing weld slag, heavy surface contamination, and large burs.
A special fastener on the back of these brushes allows you to easily swap one brush for another.
Use on contours and angles or for reaching into cracks and corners.
Rigid, partially twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. Also known as knot-wire brushes.
Clean delicate surfaces inside tubes, pipes, and holes.
Attach the shank to a handle or power tool.
Remove light-to-medium rust and stains and small burs from tubes, pipes, and holes.
Abrasive grains are embedded in the entire length of the bristles to remove workpiece material as well as surface contamination in a single step.
Use for tasks such as removing weld slag, heavy surface contamination, and large burs from tubes, pipes, and holes.
Bristles at the top of these brushes clean the bottom of closed-end holes.
Bend these brushes through curved holes and reach into corners.
These blades have a continuous edge with diamond grit to cut through ceramics.
Cut plastic, wood, and soft metal such as aluminum, brass, and copper.
The segmented edge on these blades is coated with diamond grit for cutting plastic.
A tungsten carbide grit edge cuts through abrasive materials such as composites and fiberglass.
Made of diamond abrasive, these wheels cut ceramics, tile, and other abrasive materials.
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
A ceramic alumina abrasive cuts through stainless steel.
Use these wheels for cutting soft metal, plastic, stone, and wood.