100 Rotary Tool Accessories

Filter by

Manufacturer Model Number

DFARS Compliance

Number of Pieces

System of Measurement

Shank Diameter

Bend Radius

Handpiece Diameter

Shaft Length

Length

Material

Cut Style

Body Material

Jaw Material

Degree of Coverage

For Holding

For Manufacturer

For Tool Drive Direction

For Use With

Manufacturer

RoHS Compliance

For Use On

Head Type

Overall Length

Forward

How can we improve?

22 Products

Buffing and Polishing Kits for Dremel

Buff, polish, and clean with these kits.

Number of Pieces	For Manufacturer Model Number	Includes		Each
20	100, 100-N/7, 200, 3000, 3000-1/24, 7760-N/10, 8220, 8220-1/28, 8240, 8250, 8260	Six Buffing Wheels—1/2" Dia. Five Buffing Wheels—1" Dia. Cup-Style Polishing Brush—1/2" Brush Dia. × 1/8" Shank Dia. End-Style Polishing Brush—1/8" Brush Dia. × 1/8" Shank Dia. Two Wheel-Style Polishing Brushes—3/4" Brush Dia. × 1/8" Shank Dia. Polishing Bob—3/8" Head Dia. Polishing Bob with 1/8" Shank—1/2" Head Dia. Slotted-Head Mandrel—1/8" Shank Dia. Spiral Mandrel—1/8" Shank Dia. Polishing Compound Plastic Case	0000000	000000

Engraving Kits for Dremel

For engraving and carving, these kits contain a variety of Dremel-compatible bits and stones.

1/8" Shank Dia.
No. of Pieces	For Manufacturer Model No.	Includes		Each
11	100, 100-N/7, 200, 3000, 3000-1/24, 7760-N/10, 8220, 8220-1/28, 8240, 8250, 8260	Four Engraving Cutters, Seven Grinding Stones, Plastic Storage Case	0000000	000000

Dremel Quick-Change Accessory Kits

The quick-change arbors in these kits allow you to easily swap accessories.

No. of Pieces	For Manufacturer Model No.	Includes		Each
8	100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 3981-01, 4000, 4000-2/30, 4300, 7760-N/10, 7800-01, 7800-02, 8000, 8100-N/21, 8200, 8220, 8220-1/28, 8240, 8250, 8260	Buffing Wheel, Polishing Compound, Quick-Change Wheel Arbor, Three Sanding Brushes, Two Polishing Wheel Brushes	0000000	000000
11	100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 3981-01, 4000, 4000-2/30, 4300, 7760-N/10, 7800-01, 7800-02, 8000, 8100-N/21, 8200, 8220, 8220-1/28, 8240, 8250, 8260	10 Quick-Change Cutting Wheels, Quick-Change Wheel Arbor	0000000	00000
18	100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 3981-01, 4000, 4000-2/30, 4300, 7760-N/10, 7800-01, 7800-02, 8000, 8100-N/21, 8200, 8220, 8220-1/28, 8240, 8250, 8260	Quick-Change Grinding Wheel, Quick-Change Wheel Arbor, Sanding Brush, Sanding Drum, Six Sanding Bands, Six Sanding Discs, Two Grinding Stones	0000000	00000
70	100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 3981-01, 4000, 4000-2/30, 4300, 7760-N/10, 7800-01, 7800-02, 8000, 8100-N/21, 8200, 8220, 8220-1/28, 8240, 8250, 8260	11 Quick-Change Cutting Wheels, 12 Sanding Discs, 40 Sanding Bands, Quick-Change Wheel Arbor, Sanding Drum, Three Buffing Wheels, Two Sanding Brushes	0000000	00000

Dremel Flexible Shafts

Pair with Dremel rotary tools to grind, sand, finish, and polish workpieces. With a flexible shaft, you can use them in corners and other tight spots where it's hard to fit a rotary tool.

Handpiece Dia.	Shaft Lg.	Bend Radius	For Manufacturer Model No.	Includes		Each
3/4"	36"	5"	100, 200, 3000, 4000, 4300, 8220, 8240, 8250, 8260	Handpiece	000000	000000

Router Bit Kits for Dremel

Ball Cut Style

Chamfer Cut Style

Corner Rounding Cut Style

Square Cut Style

Keep a variety of bits on hand for routing, inlaying, and mortising in wood and other soft materials.

High-Speed Steel
No. of Pieces	For Manufacturer Model No.	Includes		Each
6	100, 100-N/7, 200, 3000, 3000-1/24, 4000, 4000-2/30, 8220, 8240, 8250, 8260	Six Router Bits	0000000	000000

Dremel Router Table Attachments

Convert your rotary tool into a small router table to slot, edge, groove, and sand items in both conventional and irregular shapes. These attachments easily mount to any tabletop workspace.

For Manufacturer Model No.		Each
100, 100-N/7, 200, 3000, 3000-1/24, 4000, 4000-2/30, 8220, 8240, 8250, 8260	0000000	000000

Keyless Chucks for Dremel

Swap out accessories on your Dremel without tools.

For Shank Dia.	Manufacturer Model Number	For Manufacturer Model Number	Mounting Hole Thread Size	Body Material	Jaw Material		Each
1/32"-1/8"	4486	100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220	1/4"-40	Steel	Steel	0000000	00000

Dremel-Compatible Safety Shields

160° Coverage

360° Coverage

Protect yourself from sparks or flying debris when using your rotary tool.

Shields with 160° coverage only cover part of your rotary tool, so they're compact. They have a spring-friction design that lets you rotate them for quick adjustment and access to your rotary tool accessory.

Shields with 360° coverage close automatically.

160° Coverage
For Max. Wheel Dia.	For Manufacturer Model No.	Includes		Each
1 1/2"	100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 3981-01, 4000, 4000-2/30, 4300, 7760, 7800-01, 7800-02, 8000, 8200, 8220, 8220-1/28, 8240, 8250, 8260	1 1/2" Cutoff Wheel, Grinding Stone, Wheel Brush	0000000	000000
360° Coverage
1 1/2"	100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 3981-01, 4000, 4000-2/30, 4300, 7760, 7800-01, 7800-02, 8000, 8200, 8220, 8220-1/28, 8240, 8250, 8260	1 1/2" Cutoff Wheel	0000000	00000

Dremel Right-Angle Attachments

Convert your straight grinder into an angle grinder.

Quick-connect system allows attachment without tools.

Lg.	For Manufacturer Model No.		Each
3"	100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 3981-01, 4000, 4000-2/30, 4300, 7800-01, 7800-02, 8000, 8200, 8220, 8220-1/28, 8240, 8250, 8260	0000000	000000

Dremel Router Attachments

Convert your rotary tool into a plunge router to route circles, route freehand, and cut decorative edges, straight slots, and inlay work.

For Manufacturer Model No.		Each
100, 100-N/7, 200, 3000, 3000-1/24, 4000, 4000-2/30, 8220, 8240, 8250, 8260	0000000	000000

Dremel Drywall Cutting Kits

Make controlled cuts in drywall, fiberglass, and laminate.

For Drywall, Fiberglass, Laminate
No. of Pieces	For Manufacturer Model No.	Includes		Each
4	100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 4000, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200, 8220-1/28, 8240, 8250, 8260	Two Bits for Cutting Drywall, One Bit for Cutting Fiberglass and Laminate, One Cutting Guide	0000000	000000

Bench Vises for Dremel

Bench Vise

Removable Clamp

Free up a hand while using your Dremel on a workpiece. You can use these vises in three different ways: hold your Dremel to make it a stationary tool, secure your workpiece in the vise, or remove the clamp and use it on its own. These vises rotate 360° and tilt, so you can work on your project from any angle.

Jaw					Overall
Wd.	Max. Opening	Material	Texture	Throat Dp.	Lg.	Wd.	Ht.	Wt., lbs.	For Max. Mounting Surface Thick.	For Manufacturer Model No.	Features	Includes		Each
With Flat Jaws
360° Swivel Base
7 1/2"	7"	Rubber	Grooved	2 1/4"	13"	4 1/4"	13"	2.7	2 1/2"	100, 100-N/7, 200, 285, 300, 3000, 3000-1/24, 395, 400, 4000, 4000-2/30, 4200, 800, 8100-N/21, 8200, 8220, 8220-1/28	Removable Clamp	Tool Holder Ring	0000000	000000

Dremel Nose Cap Wrenches

For fast accessory changes without any other tools, twist these wrenches to loosen and tighten the collet on your Dremel grinder.

Dia.	Lg.	For Manufacturer Model Number		Each
1"	3/4"	100, 100-N/7, 200, 3000, 3000-1/24, 4000, 4000-2/30, 4300, 7760-N/10, 8240, 8250, 8260	0000000	00000

Tool Rests for Dremel

Tool Rest Shown In Use (Rotary Tool Not Included)

Tool Rest, Sanding Sleeve Drum, and Grinding Stone

Sharpen, grind, and sand at exact 45° and 90° angles.

Lg.	Ht.	For Manufacturer Model No.	Includes		Each
2 1/2"	2"	100, 100-N/7, 200, 3000, 3000-1/24, 4000, 4000-2/30, 4300, 7760-N/10, 8220, 8220-1/28, 8240, 8250, 8260	1/2" Sanding Sleeve Drum—60 Grit, Grinding Stone	000000	000000

Hand Grips for Dremel

Engrave, etch, carve, and polish with precise control. These grips shift the weight of your tool to your palm for a balanced feel and less fatigue.

Lg.	For Manufacturer Model No.	Includes		Each
4"	100, 100-N/7, 200, 3000, 3000-1/24, 4000, 4000-2/30, 4300, 7760, 7760-N/10, 8220, 8220-1/28, 8240, 8250, 8260	Engraving Cutter, Tracing Stencil	0000000	000000

Dremel Dust Fan Attachments

Mount these attachments to the nose of your Dremel to blow away dust and fine debris for better visibility when sanding, engraving, and carving.

For Manufacturer Model No.		Each
100, 100-N/7, 200, 3000, 3000-1/24, 4000, 4000-2/30, 4300, 7760-N/10, 8220, 8220-1/28, 8240, 8250, 8260	0000000	00000

Dremel Circle Guides

Attach these guides to your Dremel to cut circular holes in a variety of materials. They come with a straightedge cutting guide.

For Cut Dia.	For Manufacturer Model No.	Graduation Marks	Numeric Increments	Material	Mounting Hardware Included	Includes		Each
3/4"-12"	100, 100-N/7, 200, 3000, 3000-1/24, 4000, 4000-2/30, 4300, 8220, 8220-1/28, 8240, 8250, 8260	Inches, Centimeters	1", 2 cm	Plastic	Yes	1/8" Drill Bit, Centering Pin, Circle Guide, Straight Edge Guide	0000000	000000

Dremel Tile Cutting Kits

For Ceramics

Create stable, controlled cuts in tile or grout with a guide and bit that allow maximum visibility.

For Ceramics
No. of Pieces	Max. Cutting Depth	For Manufacturer Model No.	Includes		Each
2	3/4"	100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 4000, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200, 8220-1/28, 8240, 8250, 8260	One Bit for Cutting Ceramic Tile, One Cutting Guide	0000000	000000