About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
Black-Oxide Steel Flat Rollers without Seal | ||||||||||||||
| 5/8" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 15/32" | 1/32" | 9,000 | 1,200 | 950 | 250° | Needle Roller | 0000000 | 000000 |
| 5/8" | 7/16" | 5/16" | 3/4" | 5/16"-24 | 5/16" | 15/32" | 1/32" | 9,000 | 2,400 | 950 | 250° | Needle Roller | 0000000 | 00000 |
| 11/16" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 15/32" | 1/32" | 8,000 | 1,200 | 950 | 250° | Needle Roller | 0000000 | 00000 |
Black-Oxide Steel Flat Rollers with Seal | ||||||||||||||
| 5/8" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 15/32" | 1/32" | 9,000 | 1,200 | 950 | 250° | Needle Roller | 0000000 | 00000 |
| 5/8" | 7/16" | 5/16" | 3/4" | 5/16"-24 | 5/16" | 15/32" | 1/32" | 9,000 | 2,400 | 950 | 250° | Needle Roller | 0000000 | 00000 |
| 11/16" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 15/32" | 1/32" | 8,000 | 1,200 | 950 | 250° | Needle Roller | 0000000 | 00000 |
Black-Oxide Steel Crowned Rollers with Seal | ||||||||||||||
| 5/8" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 15/32" | 1/32" | 9,000 | 1,200 | 950 | 250° | Needle Roller | 0000000 | 00000 |
| 5/8" | 7/16" | 5/16" | 3/4" | 5/16"-24 | 5/16" | 15/32" | 1/32" | 9,000 | 2,400 | 950 | 250° | Needle Roller | 0000000 | 00000 |
| 11/16" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 15/32" | 1/32" | 8,000 | 1,200 | 950 | 250° | Needle Roller | 0000000 | 00000 |
High-Load Threaded Track Rollers
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated.
Crowned rollers have a slight curve, invisible to the naked eye, which helps them stay centered on surfaces that are slightly misaligned or not perfectly flat.
Rollers with seal have an end seal to protect the rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Black-Oxide Steel | |||||||||||||||
Flat Rollers without Seal | |||||||||||||||
| 5/8" | 7/16" | 5/16" | 3/4" | 5/16"-24 | 5/16" | 7/16" | 1/32" | 5,200 | 1,900 | 1,400 | 245° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 11/16" | 7/16" | 5/16" | 3/4" | 5/16"-24 | 5/16" | 7/16" | 1/32" | 5,200 | 1,900 | 1,400 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Flat Rollers with Seal | |||||||||||||||
| 5/8" | 7/16" | 5/16" | 3/4" | 5/16"-24 | 5/16" | 7/16" | 1/32" | 5,200 | 1,900 | 1,400 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 11/16" | 7/16" | 5/16" | 3/4" | 5/16"-24 | 5/16" | 7/16" | 1/32" | 5,200 | 1,900 | 1,400 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Crowned Rollers with Seal | |||||||||||||||
| 5/8" | 7/16" | 5/16" | 3/4" | 5/16"-24 | 5/16" | 7/16" | 1/32" | 5,200 | 1,900 | 1,400 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 11/16" | 7/16" | 5/16" | 3/4" | 5/16"-24 | 5/16" | 7/16" | 1/32" | 5,200 | 1,900 | 1,400 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Maintenance-Free Threaded Track Rollers
Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Dynamic Radial Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers without Seal | ||||||||||||||
| 5/8" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 15/32" | 1/32" | 1,200 | 25 | 250° | Plain | Mounting Hardware | 000000 | 000000 |
| 11/16" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 15/32" | 1/32" | 1,200 | 25 | 250° | Plain | Mounting Hardware | 00000000 | 00000 |
Steel Crowned Rollers without Seal | ||||||||||||||
| 5/8" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 15/32" | 1/32" | 1,200 | 25 | 250° | Plain | Mounting Hardware | 00000000 | 00000 |
Thrust-Load-Rated Corrosion-Resistant Threaded Track Rollers
These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
303 stainless steel rollers are more corrosion resistant than 440C stainless steel rollers.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
303 Stainless Steel Flat Rollers with Seal | ||||||||||||||||
Slotted Roller Head Drive | ||||||||||||||||
| 5/8" | 7/16" | 1/4" | 5/8" | 10-32 | 3/8" | 3/8" | 1/16" | 1,500 | 170 | 450 | 80 | 245° | Ball | Mounting Hardware | 0000000 | 000000 |
Maintenance-Free Ultra-Corrosion-Resistant Threaded Track Rollers
With dry-running PTFE sleeve bearings, these rollers don’t require lubricant. They’re also fully submersible, nonsparking, and lightweight. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Static Radial Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Fiberglass-Reinforced Nylon Flat Rollers with Seal | |||||||||||||
| 5/8" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 27/64" | 1/32" | 230 | 250° | Plain | Mounting Hardware | 0000000 | 000000 |
| 11/16" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 27/64" | 1/32" | 230 | 250° | Plain | Mounting Hardware | 0000000 | 000000 |
Corrosion-Resistant Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
440C stainless steel rollers offer better corrosion resistance than chrome-plated steel rollers.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
440C Stainless Steel Flat Rollers with Seal | ||||||||||||||
| 5/8" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 23/64" | 1/32" | 9,000 | 600 | 850 | 250° | Needle Roller | 0000000 | 0000000 |
Chrome-Plated Steel Flat Rollers with Seal | ||||||||||||||
| 5/8" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 23/64" | 1/32" | 4,000 | 600 | 800 | 250° | Needle Roller | 000000 | 00000 |
Shaft-Mount V-Groove Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. All rollers are permanently lubricated.
Sealed rollers block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seals also help retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Groove | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Features | Each | |
Steel V-Groove Rollers with Seal | ||||||||||||||
| 1 1/4" | 7/16" | 3/8" | 7/16" | 1/4" | 1/8" | 3,400 | 590 | 590 | 140 | 210° | Ball | Single Sealed and Shielded | 0000000 | 000000 |
440C Stainless Steel V-Groove Rollers with Seal | ||||||||||||||
| 1 1/4" | 7/16" | 3/8" | 7/16" | 1/4" | 1/8" | 3,400 | 590 | 590 | 140 | 210° | Ball | Single Sealed and Shielded | 0000000 | 00000 |
440C Stainless Steel V-Groove Rollers without Seal | ||||||||||||||
| 1 1/4" | 7/16" | 3/8" | 7/16" | 1/4" | 1/8" | 3,400 | 490 | 490 | 110 | 500° | Ball | Shielded | 0000000 | 000000 |
Sanitary Shaft-Mount V-Groove Track Rollers
Support and guide loads on angle rails in food, pharmaceutical, and other sanitary environments. Also known as yoke-style cam followers, these track rollers offer more mounting flexibility than threaded alternatives and are typically mounted on shafts and clevis rod ends. They’re permanently lubricated to prevent contamination, with sealed and shielded bearings blocking out debris and liquids to protect the lubricant. FDA compliant and NSF registered H1, the lubricant is safe for incidental contact with food. These track rollers are made of stainless steel, so they won’t corrode from frequent washdowns with harsh cleaners.
Double-sealed rollers are better protected from high-pressure liquid and debris than single-sealed rollers, and also operate within a broader temperature range. They’re built to withstand the frequent high-pressure, high-temperature washdowns found in food and pharmaceutical plants.
For technical drawings and 3-D models, click on a part number.
Roller | Groove | Radial Load Capacity, lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Diameter | Width | For Shaft Diameter | Overall Width | Width | Depth | Maximum Speed, rpm | Static | Dynamic | Static Thrust Load Capacity, lbs. | Maximum Temperature, °F | Bearing Type | Specifications Met | Each | |
440C Stainless Steel V-Groove Rollers With Seal | ||||||||||||||
Single-Sealed and Shielded | ||||||||||||||
| 1 3/16" | 7/16" | 3/8" | 7/16" | 1/4" | 3/16" | 3,400 | 590 | 590 | 140 | 175° | Ball | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 0000000 | 0000000 |
Double-Sealed and Shielded | ||||||||||||||
| 1 3/16" | 7/16" | 3/8" | 7/16" | 1/4" | 3/16" | 3,400 | 540 | 540 | 90 | 210° | Ball | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 0000000 | 000000 |