80mm Rollers | McMaster-Carr

Filter by

System of Measurement

Roller Width

Shaft Diameter

Roller Profile

Roller Mount Type

Track Roller Type

With Seal

Lubrication

For Load Direction

Combined Radial and Thrust

Radial

Thrust

Dynamic Radial Load Capacity

1,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

Not Rated

Bearing Type

Roller

Roller Material

Steel

Static Radial Load Capacity

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

Stud Diameter

30 mm

Stud Material

Steel

Overall Width

32 mm

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Lubricant Type

Grease

Maximum Rotation Speed

REACH

RoHS

Stud Length

Guide Roller Type

5 Products

About Track Rollers

Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.

Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.

Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.

Rollers with seal have end seals to protect rolling elements from dirt and contamination.

For technical drawings and 3-D models, click on a part number.

Metric

Roller, mm		Stud, mm		Thread			Shoulder, mm			Radial Load Cap., lbs.
Dia.	Wd.	Dia.	Lg.	Size	Pitch, mm	Lg., mm	Dia.	Lg.	Max. Speed, rpm	Static	Dynamic	Max. Temp., °F	Bearing Type		Each
Black-Oxide Steel Flat Rollers with Seal
80	35	30	63	M30	1.5	32	63	1	2,200	22,000	14,000	250°	Needle Roller	00000000	0000000
Black-Oxide Steel Crowned Rollers without Seal
80	35	30	63	M30	1.5	32	63	1	1,500	22,000	14,000	250°	Needle Roller	00000000	000000
Black-Oxide Steel Crowned Rollers with Seal
80	35	30	63	M30	1.5	32	63	1	2,200	22,000	14,000	250°	Needle Roller	00000000	000000

Shaft-Mount Track Rollers

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring.

Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.

Rollers with seal have end seals to protect rolling elements from dirt and contamination.

For technical drawings and 3-D models, click on a part number.

Metric

Roller, mm					Radial Load Cap., lbs.
Dia.	Wd.	For Shaft Dia., mm	Overall Wd., mm	Max. Speed, rpm	Static	Dynamic	Max. Temp., °F	Bearing Type	ID	ID Tolerance		Each
Black-Oxide Steel Crowned Rollers with Seal
80	30	40	32	850	13,200	7,100	210°	Needle Roller	40mm	-0.008mm to 0mm	0000000	0000000

Flanged Threaded Track Rollers

Thread the stud directly into a component or secure with a nut for through-hole mounting. The flange provides guidance and helps the roller stay on track. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.

For technical drawings and 3-D models, click on a part number.

Roller		Stud		Thread		Shoulder		Flange			Static Load Cap., lbs.
Dia.	Wd.	Dia.	Lg.	Size	Lg.	Dia.	Lg.	OD	Thick.	Max. Speed, rpm	Radial	Thrust	Max. Temp., °F	Includes		Each
Steel Flat Rollers with Seal
Roller Bearing
80mm	52mm	30mm	69.5mm	M30	40mm	44.5mm	1.6mm	102mm	14mm	Not Rated	19,900	12,000	225°	Mounting Hardware	00000000	0000000