About Tool Steel
More
Oversized Multipurpose Air-Hardening A2 Tool Steel Rods and Discs
- Yield Strength: 55,000 psi
- Hardness: Rockwell B95 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C64
An oversized diameter allows for finishing to your exact requirements. A2 tool steel is more wear resistant than O1 and it keeps a sharper cutting edge. This air-hardening material is widely used for punches, broaches, and dies. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To order: Please specify length in increments of 0.25” within the range listed.
| Dia. | Dia. Tolerance | Mechanical Finish | Straightness Tolerance | Specifications Met | Choose a Length | Per Inch | |
| 1/4" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 3/8" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 000 |
| 1/2" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 0000 |
| 5/8" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 0000 |
| 3/4" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 0000 |
| 7/8" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 0000 |
| 1" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 0000 |
| 1 1/8" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 0000 |
| 1 1/4" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 0000 |
| 1 3/8" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 0000 |
| 1 1/2" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 0000 |
| 1 5/8" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 0000 |
| 1 3/4" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 0000 |
| 2" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 0000 |
| 2 1/4" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 2 1/2" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 2 3/4" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 3" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 3 1/4" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 000000 | 00000 |
| 3 1/2" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 3 3/4" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 4" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 4 1/4" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 4 1/2" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 4 3/4" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 5" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 5 1/2" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 6" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 6 1/2" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 000000 | 00000 |
| 7" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 00000 |
| 8" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 000000 |
Extra-Corrosion-Resistant C276 Nickel Rods
- Yield Strength: 41,000 psi
- Hardness: Rockwell B91 (Medium)
- Temper Rating: Softened (Annealed)
- Fabrication: Annealed
- Specifications Met: ASTM B574
C276 nickel has excellent corrosion resistance against chemicals, including nitric acid, sulfuric acid, and hydrochloric acid. It resists chloride pitting better than stainless steel does. This alloy won’t stress crack from contact with sulfides, making it good for use in petrochemical applications. C276 nickel is easy to weld and remains corrosion resistant after welding. It retains its strength after being reshaped. C276 nickel is comparable to Hastelloy C276.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 4 ft. Lg. | |
| 1/4" | -0.002" to 0.005" | 0000000 | |||
| 3/8" | -0.002" to 0.005" | 0000000 | |||
| 1/2" | -0.002" to 0.005" | 0000000 | |||
| 5/8" | -0.002" to 0.005" | 0000000 | |||
| 3/4" | -0.002" to 0.005" | 0000000 | |||
| 7/8" | -0.002" to 0.005" | 0000000 | |||
| 1" | -0.002" to 0.005" | 0000000 | |||
| 1 1/4" | -0.002" to 0.01" | 0000000 | |||
| 1 1/2" | -0.002" to 0.01" | 0000000 | |||
| 2" | -0.002" to 0.01" | 0000000 |
Wear-Resistant Cobalt 6B Rods
- Yield Strength: 70,000 psi
- Hardness: Rockwell C33 (Hard)
- Heat Treatable: No
- Tensile Strength: 130,000 psi
Also known as Haynes 6B, alloy 6B, and Stellite® 6B, Cobalt 6B is a tough and wear-resistant cobalt alloy. With a wrought material structure, it withstands rapid changes in temperature, resists abrasion, and is four times as impact resistant as other cast materials made from the same chemicals. It won’t corrode or oxidize in extreme environments, making it good for use in food-handling machinery and chemical equipment.
Cobalt 6B balances the properties of alloys with higher and lower carbon content, and is known for its all-around performance. It slides against other materials without degrading, seizing, or galling, so it’s often used in areas that can’t be lubricated or for sliding parts such as sleeves. Cobalt 6B maintains its properties at high temperatures. Unlike pure cobalt, it’s nonmagnetic, so it can be used for parts in electrical systems.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Ultra-High-Temperature Quartz Glass Rods and Discs
- Color: Clear
- Max. Temperature: 2100° F
- Fabrication: Annealed
Able to withstand temperatures up to 2100° F, this quartz glass is useful in high-temperature applications that also require optical clarity, such as high-intensity lighting, fiber-optic production, and optical lens systems. It provides excellent UV transmission, as well as high transmission in the visible and infrared ranges.
For technical drawings and 3-D models, click on a part number.
12" Lg. | |||||
|---|---|---|---|---|---|
| Dia., mm | Dia. Tolerance, mm | Edge Fabrication | Lg. Tolerance | Each | |
| 1 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 1.5 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 0000 |
| 2 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 0000 |
| 2.5 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 0000 |
| 3 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 0000 |
| 3.5 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 0000 |
| 4 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 0000 |
| 5 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 0000 |
| 6 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 0000 |
| 6.4 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 0000 |
| 7 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 0000 |
| 8 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 0000 |
| 9 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 10 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 11 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 12 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 13 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 14 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 15 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 16 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 17 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 18 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 19 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 20 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 22 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 24 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| 25 | -0.380 to 0.380 | Ground | -0.125" to 0.125" | 00000000 | 00000 |
| Dia. | Dia. Tolerance | Edge Fabrication | Lg. Tolerance | Each | |
1/16" Lg. | |||||
|---|---|---|---|---|---|
| 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 3/4" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 1" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 1 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 2 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 3" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 3 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 4" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 5" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 6" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
1/8" Lg. | |||||
| 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 3/4" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 1" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 1 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 2 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 3" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 3 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 4" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 5" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 6" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
1/4" Lg. | |||||
| 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 3/4" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 1" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 1 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 2 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 3" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 3 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 4" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 5" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 6" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
1/2" Lg. | |||||
| 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 3/4" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 1" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 1 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 2 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 3" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 3 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 4" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 5" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 6" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
3/4" Lg. | |||||
| 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 3/4" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 1" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 1 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 00000 |
| 2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 2 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 3" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 3 1/2" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 4" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 5" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
| 6" | -0.010" to 0.010" | Ground | -0.005" to 0.005" | 0000000 | 000000 |
Ultra-High-Temperature Quartz Glass Tubes
- Color: Clear
- Max. Temperature: 2000° F
- Fabrication: Annealed
Blistering temperatures won’t melt these quartz tubes, and rapid temperature shifts won’t cause them to crack. Even tougher than borosilicate, they can be used in furnaces and ovens heated up to 2000° F. These highly pure tubes are often used in laboratories because they won’t leach impurities into samples or contaminate chemical reactions. Quartz tubes are optically clear and have excellent UV transmission, making them ideal for UV purification systems.
For technical drawings and 3-D models, click on a part number.
12" Lg. | |||||
|---|---|---|---|---|---|
| OD | ID | Wall Thick. | Edge Fabrication | Each | |
Inch | |||||
| 0.25" | 0.157" | 0.043" | Ground | 0000000 | 00000 |
| 0.375" | 0.276" | 0.05" | Ground | 0000000 | 0000 |
| 0.5" | 0.413" | 0.044" | Ground | 0000000 | 0000 |
| 0.625" | 0.551" | 0.039" | Ground | 0000000 | 00000 |
| 0.75" | 0.630" | 0.059" | Ground | 0000000 | 00000 |
| 0.875" | 0.748" | 0.059" | Ground | 0000000 | 00000 |
| 1" | 0.866" | 0.074" | Ground | 0000000 | 00000 |
Metric | |||||
| 3mm | 1.000mm | 1mm | Ground | 00000000 | 0000 |
| 4mm | 2.000mm | 1mm | Ground | 00000000 | 0000 |
| 5mm | 3.000mm | 1mm | Ground | 00000000 | 0000 |
| 6mm | 4.000mm | 1mm | Ground | 00000000 | 0000 |
| 7mm | 5.000mm | 1mm | Ground | 00000000 | 0000 |
| 8mm | 6.000mm | 1mm | Ground | 00000000 | 0000 |
| 9mm | 7.000mm | 1mm | Ground | 0000000 | 0000 |
| 10mm | 8.000mm | 1mm | Ground | 0000000 | 0000 |
| 11mm | 9.000mm | 1mm | Ground | 0000000 | 0000 |
| 12mm | 10.000mm | 1mm | Ground | 0000000 | 0000 |
| 13mm | 11.000mm | 1mm | Ground | 0000000 | 0000 |
| 14mm | 12.000mm | 1mm | Ground | 0000000 | 0000 |
| 15mm | 13.000mm | 1mm | Ground | 0000000 | 0000 |
| 16mm | 14.000mm | 1mm | Ground | 0000000 | 00000 |
| 17mm | 15.000mm | 1mm | Ground | 0000000 | 00000 |
| 18mm | 16.000mm | 1mm | Ground | 0000000 | 00000 |
| 19mm | 16.000mm | 1.5mm | Ground | 0000000 | 00000 |
| 20mm | 17.000mm | 1.5mm | Ground | 0000000 | 00000 |
| 21.6mm | 18.000mm | 1.8mm | Ground | 0000000 | 00000 |
| 22mm | 19.000mm | 1.5mm | Ground | 0000000 | 00000 |
| 23mm | 20.000mm | 1.5mm | Ground | 0000000 | 00000 |
| 24mm | 20.000mm | 2mm | Ground | 0000000 | 00000 |
| 25mm | 22.000mm | 1.5mm | Ground | 0000000 | 00000 |
Borosilicate Glass Rods and Discs
- Color: Clear
- Max. Temperature: 445° F
- Fabrication: Annealed
Also called Pyrex and Schott glass, this glass resists clouding and pitting and is highly chemical and heat resistant. With a low rate of thermal expansion, it stays dimensionally stable during changes in temperature.
Also Available: Other disc sizes. Please select 8477K98 and specify the diameter and length.
For technical drawings and 3-D models, click on a part number.
12" Lg. | 24" Lg. | ||||||
|---|---|---|---|---|---|---|---|
| Diameter | Diameter Tolerance | Edge Fabrication | Specifications Met | Each | Each | ||
Inch | |||||||
| 1/2" | -0.020" to 0.020" | Ground | MIL-G-47033 | 0000000 | 00000 | 0000000 | 000000 |
| 5/8" | -0.024" to 0.024" | Ground | MIL-G-47033 | 0000000 | 00000 | 0000000 | 00000 |
| 3/4" | -0.031" to 0.031" | Ground | MIL-G-47033 | 0000000 | 00000 | 0000000 | 00000 |
| 1" | -0.039" to 0.039" | Ground | MIL-G-47033 | 0000000 | 00000 | 0000000 | 00000 |
| 1 1/4" | -0.051" to 0.051" | Ground | MIL-G-47033 | 0000000 | 00000 | 0000000 | 00000 |
| 1 1/2" | -0.067" to 0.067" | Ground | MIL-G-47033 | 0000000 | 00000 | 0000000 | 000000 |
Metric | |||||||
| 2mm | -0.400mm to 0.400mm | Ground | MIL-G-47033 | 000000 | 0000 | 000000 | 0000 |
| 3mm | -0.400mm to 0.400mm | Ground | MIL-G-47033 | 0000000 | 0000 | 0000000 | 0000 |
| 4mm | -0.400mm to 0.400mm | Ground | MIL-G-47033 | 0000000 | 0000 | 0000000 | 0000 |
| 5mm | -0.400mm to 0.400mm | Ground | MIL-G-47033 | 0000000 | 0000 | 0000000 | 0000 |
| 6mm | -0.400mm to 0.400mm | Ground | MIL-G-47033 | 0000000 | 0000 | 0000000 | 0000 |
| 7mm | -0.400mm to 0.400mm | Ground | MIL-G-47033 | 0000000 | 0000 | 0000000 | 0000 |
| 8mm | -0.400mm to 0.400mm | Ground | MIL-G-47033 | 0000000 | 0000 | 0000000 | 0000 |
| Diameter | Diameter Tolerance | Edge Fabrication | Specifications Met | 1/8" Lg. | 3/16" Lg. | 1/4" Lg. | 3/8" Lg. | 1/2" Lg. | 5/8" Lg. | 3/4" Lg. | |
| 1" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 1 1/4" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 1 1/2" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 1 3/4" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 2" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 2 1/4" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 2 1/2" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 2 3/4" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 3" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 3 1/2" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 3 3/4" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 4" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 4 1/4" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 4 1/2" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 5" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 5 1/2" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 6" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 | |||||||
| 6 1/2" | -0.015" to 0.015" | Ground | MIL-G-47033 | 0000000 |
Borosilicate Glass Tubes
- Color: Clear
- Max. Temperature: 445° F
- Fabrication: Annealed
Also called Pyrex and Schott glass, this glass resists clouding and pitting and is highly chemical and heat resistant. With a low rate of thermal expansion, it stays dimensionally stable during changes in temperature.
For technical drawings and 3-D models, click on a part number.
12" Lg. | ||||||
|---|---|---|---|---|---|---|
| OD | ID | Wall Thick. | Edge Fabrication | Specifications Met | Each | |
Inch | ||||||
| 0.25" | 0.160" | 0.047" | Ground | MIL-G-47033 | 0000000 | 00000 |
| 0.375" | 0.220" | 0.079" | Ground | MIL-G-47033 | 0000000 | 0000 |
| 0.5" | 0.310" | 0.094" | Ground | MIL-G-47033 | 0000000 | 00000 |
| 0.5" | 0.380" | 0.063" | Ground | MIL-G-47033 | 0000000 | 0000 |
| 0.625" | 0.440" | 0.094" | Ground | MIL-G-47033 | 0000000 | 00000 |
| 0.625" | 0.500" | 0.063" | Ground | MIL-G-47033 | 0000000 | 0000 |
| 0.75" | 0.500" | 0.126" | Ground | MIL-G-47033 | 0000000 | 00000 |
| 0.75" | 0.620" | 0.063" | Ground | MIL-G-47033 | 0000000 | 00000 |
| 0.875" | 0.620" | 0.126" | Ground | MIL-G-47033 | 0000000 | 00000 |
| 1" | 0.690" | 0.157" | Ground | MIL-G-47033 | 0000000 | 00000 |
| 1" | 0.810" | 0.094" | Ground | MIL-G-47033 | 0000000 | 00000 |
Metric | ||||||
| 5mm | 0.600mm | 2.2mm | Ground | MIL-G-47033 | 0000000 | 0000 |
| 6mm | 1.200mm | 2.4mm | Ground | MIL-G-47033 | 0000000 | 0000 |
| 6mm | 2.700mm | 1.65mm | Ground | MIL-G-47033 | 0000000 | 0000 |
| 7mm | 3.000mm | 2mm | Ground | MIL-G-47033 | 0000000 | 0000 |
| 8mm | 3.000mm | 2.5mm | Ground | MIL-G-47033 | 0000000 | 0000 |
| 9mm | 3.000mm | 3mm | Ground | MIL-G-47033 | 0000000 | 00000 |
Pressure-Rated Borosilicate Glass Tubes
- Color: Clear
- Max. Temperature: See table
- Fabrication: Annealed
These short glass tubes can be used as glass bowls in oil dispensers. Borosilicate glass resists clouding and pitting and is highly chemical resistant. With a low rate of thermal expansion, it stays dimensionally stable during changes in temperature.
For technical drawings and 3-D models, click on a part number.
| OD | ID | Wall Thick. | Lg. | Max. Pressure, psi | Max. Temperature, °F | Edge Fabrication | Each | |
| 1" | 3/4" | 1/8" | 7/8" | 190 | 212° | Ground | 00000000 | 000000 |
| 1 1/4" | 1" | 1/8" | 1 1/8" | 150 | 212° | Ground | 0000000 | 00000 |
| 1 1/2" | 1 1/4" | 1/8" | 1 3/8" | 130 | 212° | Ground | 0000000 | 00000 |
| 1 3/4" | 1 15/32" | 9/64" | 1 5/8" | 130 | 212° | Ground | 0000000 | 00000 |
| 2" | 1 11/16" | 5/32" | 1 7/8" | 110 | 185° | Ground | 0000000 | 00000 |
| 2 1/4" | 1 29/32" | 11/64" | 2 1/8" | 105 | 185° | Ground | 0000000 | 00000 |
| 2 1/2" | 2 1/8" | 3/16" | 2 3/8" | 100 | 185° | Ground | 0000000 | 00000 |
| 3" | 2 19/32" | 13/64" | 3" | 85 | 150° | Ground | 0000000 | 00000 |
| 3 1/2" | 3 1/16" | 7/32" | 4" | 60 | 150° | Ground | 0000000 | 00000 |
| 4 1/4" | 3 3/4" | 1/4" | 5" | 50 | 125° | Ground | 0000000 | 00000 |
| 5 1/2" | 5" | 1/4" | 7" | 35 | 100° | Ground | 00000000 | 000000 |
Pressure-Rated Borosilicate Glass Discs
- Color: Clear
- Max. Temperature: See table
- Fabrication: See table
Commonly used as sight glass. Also called Pyrex and Schott glass, borosilicate glass resists clouding and pitting and is highly chemical and heat resistant. With a low rate of thermal expansion, it stays dimensionally stable during changes in temperature.
Tempered glass is stronger than annealed glass.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Lg. | Lg. Tolerance | Max. Pressure, psi | Max. Temperature, °F | Edge Fabrication | Specifications Met | Each | |
Annealed Glass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3 1/2" | -0.015" to 0.015" | 3/4" | -0.031" to 0.031" | 175 | 445° | Ground | MIL-G-47033 | 0000000 | 000000 |
| 4" | -0.015" to 0.015" | 3/4" | -0.031" to 0.031" | 150 | 445° | Ground | MIL-G-47033 | 0000000 | 00000 |
| 4 1/2" | -0.015" to 0.015" | 3/8" | -0.031" to 0.031" | 35 | 445° | Ground | MIL-G-47033 | 0000000 | 00000 |
| 5" | -0.015" to 0.015" | 3/4" | -0.031" to 0.031" | 100 | 445° | Ground | MIL-G-47033 | 0000000 | 00000 |
| 6" | -0.015" to 0.015" | 3/4" | -0.031" to 0.031" | 75 | 445° | Ground | MIL-G-47033 | 0000000 | 000000 |
| 6 3/4" | -0.015" to 0.015" | 3/4" | -0.031" to 0.031" | 55 | 445° | Ground | MIL-G-47033 | 0000000 | 000000 |
| 8 3/8" | -0.015" to 0.015" | 3/4" | -0.031" to 0.031" | 35 | 445° | Ground | MIL-G-47033 | 0000000 | 000000 |