About Rod Ends
More
Swivel-Shaft Rod Ends
With a ball joint at the top of the shank, these rod ends pivot in the middle of the body instead of in the eyelet. Use them for linear push applications that require movement along the length of the connecting rod. Also known as control swivels, they provide an excellent pivoting connection between light mechanical components while constraining excess play. A rubber disc dampens vibration.
Rod ends with set screw, nut, and lock washer have a self-locking set screw and integral nut with lock washer for added holding strength.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size  | Shank Center Lg. | Shank Thread Lg. | ID | O'all Dia. | O'all Wd. | O'all Thick. | For Connecting Rod OD | Max. Ball Swivel | Temp. Range, °F | Material | Shank Thread Direction | Each | |
Ball Joints | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-20 | 1 3/16" | 5/16" | 1/4" | __ | 3/8" | 3/8" | 1/4" | 30° | -60° to 250° | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
Ball Joints with Set Screw, Nut, and Lock Washer | |||||||||||||
| 1/4"-20 | 1 3/16" | 5/16" | 5/16" | 1/2" | __ | __ | 1/4", 5/16" | 30° | -60° to 250° | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 0000 |
Corrosion-Resistant Fully Threaded Rod End Bolts
These rod end bolts are good for wet and corrosive environments—for maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
Brass rod end bolts resist corrosion in humid and wet environments, but not as well as stainless steel bolts. They're also not as strong. Often, brass bolts are chosen for their look, or to match other components, such as hinges.
303 and 304 stainless steel rod end bolts won't rust in humid, wet, and washdown environments. They're stronger than brass bolts and nearly as strong as steel. They will rust when exposed to salt water and chemicals, however. Black-oxide 303 stainless steel rod end bolts have a matte-black finish that adds some corrosion resistance but is mostly chosen for its looks.
17-4 PH stainless steel rod end bolts have the most tensile strength—a similar amount to high-strength alloy steel. They also won’t rust in humid, wet, and washdown environments. Even at high temperatures, they maintain their excellent strength and corrosion resistance, so they’re often used in automotive drive trains and heat exchangers. However, they’ll rust when exposed to salt water and chemicals.
316 stainless steel rod end bolts are our most corrosion resistant, and they're nearly as strong as steel rod end bolts. Use them in areas with salt water, chlorine, and chemicals without worrying about rust.
ASTM rod end bolts meet a standard for material.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Specifications Met | Fastener Strength Grade/Class | Each | |
Right-Hand Threaded Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Brass | ||||||||||
| 1/4"-20 | 3/16" | 5/8" | 2" | 1 1/2" | 1/4" | 55,000 | ASTM B16 | __ | 00000000 | 000000 |
| 1/4"-20 | 1/4" | 5/8" | 1 1/2" | 1 1/8" | 1/4" | 55,000 | ASTM B16 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 2" | 1 1/2" | 1/4" | 55,000 | ASTM B16 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 3" | 2 1/2" | 1/4" | 55,000 | ASTM B16 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 5" | 4 1/2" | 1/4" | 55,000 | ASTM B16 | __ | 00000000 | 00000 |
303 Stainless Steel | ||||||||||
| 1/4"-20 | 3/16" | 5/8" | 2" | 1 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 0000 |
| 1/4"-20 | 3/16" | 5/8" | 3" | 2 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 2" | 1 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 3" | 2 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
Black-Oxide 303 Stainless Steel | ||||||||||
| 1/4"-20 | 3/16" | 5/8" | 2" | 1 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 0000 |
| 1/4"-20 | 3/16" | 5/8" | 3" | 2 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 1 1/2" | 1 1/8" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 2" | 1 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 3" | 2 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 6" | 5 5/8" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
304 Stainless Steel | ||||||||||
| 1/4"-20 | 1/4" | 5/8" | 1 1/2" | 1 1/8" | 1/4" | 75,000 | ASTM A193 | ASTM Grade B8 | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 3 1/2" | 3" | 1/4" | 75,000 | ASTM A193 | ASTM Grade B8 | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 6" | 5 5/8" | 1/4" | 75,000 | ASTM A193 | ASTM Grade B8 | 0000000 | 00000 |
17-4 PH Stainless Steel | ||||||||||
| 1/4"-20 | 3/16" | 5/8" | 2" | 1 1/2" | 1/4" | 160,000 | ASTM A564 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 1 1/2" | 1 1/8" | 1/4" | 160,000 | ASTM A564 | __ | 00000000 | 00000 |
316 Stainless Steel | ||||||||||
| 1/4"-20 | 3/16" | 5/8" | 2" | 1 1/2" | 1/4" | 75,000 | ASTM A276 | __ | 00000000 | 0000 |
| 1/4"-20 | 3/16" | 5/8" | 3" | 2 1/2" | 1/4" | 75,000 | ASTM A276 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 1 1/2" | 1 1/8" | 1/4" | 75,000 | ASTM A276 | __ | 00000000 | 0000 |
| 1/4"-20 | 1/4" | 5/8" | 2" | 1 1/2" | 1/4" | 75,000 | ASTM A276 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 3" | 2 1/2" | 1/4" | 75,000 | ASTM A276 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 3 1/2" | 3" | 1/4" | 75,000 | ASTM A276 | __ | 00000000 | 00000 |
Left-Hand Threaded Shank | ||||||||||
303 Stainless Steel | ||||||||||
| 1/4"-20 | 3/16" | 5/8" | 2" | 1 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 0000 |
| 1/4"-20 | 1/4" | 5/8" | 1 1/2" | 1 1/8" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 2" | 1 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 3" | 2 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
Fully Threaded Rod End Bolts
For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Specifications Met | Material | Each | |
Right-Hand Threaded Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-20 | 1/4" | 5/8" | 1 1/2" | 1 1/8" | 1/4" | 60,000 | ASTM A521 Class CA | Black-Oxide Carbon Steel | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 3 1/2" | 3 1/8" | 1/4" | 60,000 | ASTM A521 Class CA | Black-Oxide Carbon Steel | 0000000 | 0000 |
| 1/4"-20 | 1/4" | 5/8" | 6" | 5 5/8" | 1/4" | 60,000 | ASTM A521 Class CA | Black-Oxide Carbon Steel | 0000000 | 0000 |
High-Strength Fully Threaded Rod End Bolts
These alloy steel rod end bolts have the highest tensile strength of any steel fully threaded rod end bolt we offer. For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Fastener Strength Grade/Class | Specifications Met | Material | Each | |
Right-Hand Threaded Shank | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-20 | 3/16" | 5/8" | 2" | 1 1/2" | 1/4" | 125,000 | ASTM Grade B7 | ASTM A193 | Black-Oxide Alloy Steel | 0000000 | 00000 |
| 1/4"-20 | 3/16" | 5/8" | 3" | 2 1/2" | 1/4" | 125,000 | ASTM Grade B7 | ASTM A193 | Black-Oxide Alloy Steel | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 1 1/2" | 1 1/8" | 1/4" | 125,000 | ASTM Grade B7 | ASTM A193 | Black-Oxide Alloy Steel | 0000000 | 0000 |
| 1/4"-20 | 1/4" | 5/8" | 2" | 1 1/2" | 1/4" | 125,000 | ASTM Grade B7 | ASTM A193 | Black-Oxide Alloy Steel | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 3" | 2 1/2" | 1/4" | 125,000 | ASTM Grade B7 | ASTM A193 | Black-Oxide Alloy Steel | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 5/8" | 3 1/2" | 3 1/8" | 1/4" | 125,000 | ASTM Grade B7 | ASTM A193 | Black-Oxide Alloy Steel | 0000000 | 0000 |
| 1/4"-20 | 1/4" | 5/8" | 6" | 5 5/8" | 1/4" | 125,000 | ASTM Grade B7 | ASTM A193 | Black-Oxide Alloy Steel | 0000000 | 0000 |
Partially Threaded Rod End Bolts
Create pivoting connections in applications that require high shear strength—the partially threaded shank of these rod end bolts withstands more side force than a fully threaded shank. Also known as swing bolts and eyebolts, they are used to create hinges, turnbuckles, and tie downs. Unlike ball joint rod ends, these rod end bolts are made from a single piece of metal, so they wear down more slowly and have a more controlled swing. However, because they do not have a moving ball joint, they do not compensate for angular misalignment.
Made from steel, they are stronger and more wear resistant than stainless steel rod end bolts, but they are not as corrosion resistant. Rod end bolts with a black-oxide finish have a dark, matte coating that keeps the steel from rusting in dry environments.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Material | Each | |
Right-Hand Threaded Shank | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/4"-20 | 3/16" | 1/2" | 2" | 3/4" | 5/16" | 75,000 | Black-Oxide Carbon Steel | 0000000 | 00000 |
| 1/4"-20 | 3/16" | 1/2" | 3" | 3/4" | 5/16" | 75,000 | Black-Oxide Carbon Steel | 0000000 | 00000 |
| 1/4"-20 | 3/16" | 1/2" | 4" | 3/4" | 5/16" | 75,000 | Black-Oxide Carbon Steel | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 1/2" | 2" | 3/4" | 5/16" | 75,000 | Black-Oxide Carbon Steel | 0000000 | 0000 |
| 1/4"-20 | 1/4" | 1/2" | 3" | 3/4" | 5/16" | 75,000 | Black-Oxide Carbon Steel | 0000000 | 0000 |
| 1/4"-20 | 1/4" | 1/2" | 4" | 3/4" | 5/16" | 75,000 | Black-Oxide Carbon Steel | 0000000 | 00000 |
Left-Hand Threaded Shank | |||||||||
| 1/4"-20 | 3/16" | 1/2" | 2" | 3/4" | 9/32" | 75,000 | Black-Oxide Carbon Steel | 0000000 | 0000 |
| 1/4"-20 | 3/16" | 1/2" | 3" | 3/4" | 9/32" | 75,000 | Black-Oxide Carbon Steel | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 1/2" | 2" | 3/4" | 9/32" | 75,000 | Black-Oxide Carbon Steel | 0000000 | 0000 |
Internally Threaded Rod End Bolts with Partial Threads
Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Partially Threaded Rod End Bolts
Pivot and hinge components in wet and corrosive environments with these stainless steel or brass rod end bolts. They're commonly known as swing bolts and eyebolts. With no moving parts, they're less likely to wear out than ball joint rod ends, although they don't compensate for misalignment as effectively. Use them to guide and connect components, such as tubing, or as a turnbuckle to tension wire and cable. They can also be used as tie downs and hinges.
With external threads, these bolts hold fast to female threaded components in applications where high shear strength is required, such as water pumps, alternators, and motor mounts. Because the shank is only partially threaded, they handle a greater amount of force from the side than bolts with a fully threaded shank.
303 and 304 stainless steel rod end bolts won't rust in humid, wet, and washdown environments. They're stronger than brass bolts and nearly as strong as steel. They will rust when exposed to salt water and chemicals, however. 316 stainless steel rod end bolts are our most corrosion resistant, and they're nearly as strong as steel rod end bolts. Use them in areas with salt water, chlorine, and chemicals without worrying about rust.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Each | |
Right-Hand Threaded Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
304 Stainless Steel | ||||||||
| 1/4"-20 | 3/16" | 1/2" | 2" | 3/4" | 1/4" | 85,000 | 000000 | 000000 |
| 1/4"-20 | 3/16" | 1/2" | 3" | 3/4" | 1/4" | 85,000 | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 1/2" | 2" | 3/4" | 1/4" | 85,000 | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 1/2" | 3" | 3/4" | 1/4" | 85,000 | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 1/2" | 4" | 3/4" | 1/4" | 85,000 | 0000000 | 00000 |
316 Stainless Steel | ||||||||
| 1/4"-20 | 3/16" | 1/2" | 2" | 3/4" | 9/32" | 80,000 | 0000000 | 00000 |
| 1/4"-20 | 3/16" | 1/2" | 3" | 3/4" | 9/32" | 80,000 | 0000000 | 00000 |
| 1/4"-20 | 3/16" | 1/2" | 4" | 3/4" | 9/32" | 80,000 | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 1/2" | 2" | 3/4" | 9/32" | 80,000 | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 1/2" | 3" | 3/4" | 9/32" | 80,000 | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 1/2" | 4" | 3/4" | 9/32" | 80,000 | 0000000 | 00000 |
Flat-Shoulder Rod End Bolts
These black-oxide carbon steel rod end bolts are heat treated for added strength. Also known as jig latch bolts, they mount flush to any flat surface.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Shank Threading | O'all Thick. | Tensile Strength, psi | Material | Each | |
Right-Hand Threaded Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-20 | 1/4" | 1/2" | 1 1/2" | 3/4" | Partially Threaded | 5/16" | 78,000 | Black-Oxide Carbon Steel | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 1/2" | 2 1/2" | 1 1/4" | Partially Threaded | 5/16" | 78,000 | Black-Oxide Carbon Steel | 00000000 | 00000 |
| 1/4"-20 | 1/4" | 1/2" | 2 5/8" | 2 5/16" | Fully Threaded | 1/4" | 78,000 | Black-Oxide Carbon Steel | 00000000 | 00000 |
Corrosion-Resistant Flat-Shoulder Rod End Bolts
Made of stainless steel, these rod end bolts are stronger and more corrosion resistant than our standard flat-shoulder rod end bolts. Also known as jig latch bolts, they mount flush to any flat surface.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Shank Threading | O'all Thick. | Tensile Strength, psi | Material | Each | |
Right-Hand Threaded Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-20 | 1/4" | 1/2" | 1 1/2" | 3/4" | Partially Threaded | 5/16" | 100,000 | 303 Stainless Steel | 0000000 | 000000 |
| 1/4"-20 | 1/4" | 1/2" | 2 1/2" | 1 1/4" | Partially Threaded | 5/16" | 100,000 | 303 Stainless Steel | 0000000 | 00000 |
| 1/4"-20 | 1/4" | 1/2" | 2 5/8" | 2 5/16" | Fully Threaded | 1/4" | 100,000 | 303 Stainless Steel | 0000000 | 00000 |
Clevis Rod Ends
These steel rod ends are machined to SAE standards. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Includes | Shank Thread Direction | Each | |
Carbon Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-20 | 1/4" | 9/32" | 5/8" | 2" | 3/4" | 1 1/4" | 58,000 | Clevis Pin, Cotter Pin | Right Hand | 0000000 | 00000 |
Corrosion-Resistant Clevis Rod Ends
These clevis rod ends offer more corrosion resistance than standard steel clevis rod ends. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
Zinc-plated steel rod ends offer moderate corrosion resistance. Stainless steel rod ends offer excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Includes | Shank Thread Direction | Each | |
Zinc-Plated Carbon Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-20 | 1/4" | 1/4" | 5/8" | 2" | 3/4" | 1 1/4" | 58,000 | Clevis Pin, Cotter Pin | Right Hand | 0000000 | 00000 |
316 Stainless Steel | |||||||||||
| 1/4"-20 | 1/4" | 5/16" | 5/8" | 2" | 3/4" | 1 1/4" | 80,000 | Clevis Pin, Cotter Pin | Right Hand | 0000000 | 00000 |
Easy-Adapt Clevis Rod Ends
Make quick adjustments to these rod ends by inserting and releasing the clevis pins without the need to bend them into place. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies. All are zinc-plated steel for moderate corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Includes | Shank Thread Direction | Each | |
Zinc-Plated Carbon Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-20 | 1/4" | 1/4" | 1/2" | 15/16" | 15/32" | 15/32" | 60,000 | Snap-On Spring Clevis Pin | Right Hand | 0000000 | 00000 |
Quick-Install Ball Joint Linkages
A spring-loaded sleeve allows for rapid assembly and disassembly. The stud is machined to fit perfectly inside its housing and swivel in all directions—good for light mechanical components and controls.
Ball joint linkages with an internal spring protect the spring from dirt and dust, unlike ball joint linkages with an external spring.
For technical drawings and 3-D models, click on a part number.
Shank | Ball Stud | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Center Lg. | Thread Lg. | Thread Size | Center Lg. | Lg. | Max. Ball Swivel | Static Radial Load Cap. | Material | Ball Stud Thread Direction | Each | |
Right-Hand Threaded Shank | |||||||||||
External Spring | |||||||||||
| 1/4"-20 | 15/16" | 1/2" | 1/4"-20 | 1" | 9/16" | 32° | Not Rated | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 000000 |
Internal Spring | |||||||||||
| 1/4"-20 | 7/8" | 1/2" | 1/4"-20 | 1" | 9/16" | 30° | Not Rated | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 0000 |
Bent-Swivel Ball Joint Linkages
Use these bent linkages for light duty applications. The stud is machined to fit perfectly inside its housing and swivel in all directions.
For technical drawings and 3-D models, click on a part number.
Shank | Ball Stud | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Center Lg. | Thread Lg. | Thread Size | Center Lg. | Lg. | Max. Ball Swivel | Static Radial Load Cap. | Material | Ball Stud Thread Direction | Each | |
Right-Hand Threaded Shank | |||||||||||
| 1/4"-20 | 1 1/16" | 11/16" | 1/4"-20 | 1 3/16" | 9/16" | 30° | Not Rated | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |