Robot Bases
Elevate robot arms with these bases so they can reach onto raised surfaces, such as conveyor belts or workstations. Made from steel, these bases are strong and built to last—they’re also machinable and weldable, so you can modify the mounting plates to suit your application. Secure them to the ground or other flat surface using the holes in the bottom plate. Additional holes are designed to level the bases—thread fasteners (not included) through each hole and adjust their depth to compensate for uneven floors. These bases are only for use at collaborative speeds. They are not designed for robots moving at high speeds.
If you do not see your robot model arm listed, you will need to confirm compatibility yourself. In addition to mounting hole pattern, you will also need to ensure that the maximum potential forces of your robot arm and application are within safe limits for the base's footprint, center of gravity, and any additional anchoring systems. Taller bases have a higher center of gravity and thus require heavier anchoring systems to maintain stability at higher forces compared to shorter bases.
For technical drawings and 3-D models, click on a part number.
Use dollies to turn these stationary bases into mobile bases. They have three swivel casters with total lock brakes, so you can brake the wheels and lock the swivel motion with the press of a foot pedal. They also have three leveling feet that swivel to compensate for uneven floors. Clearance under and between the dolly legs will let you use a pallet jack to move very heavy or delicate setups.
Overall | Base Mount. Location | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Lg. | Wd. | Static Load Cap., lbs. | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Plate Dia. | Mount. Ht. | Each | |
Gray Powder-Coated Steel | |||||||||
| 7 3/16" | 38 11/16" | 34 1/2" | 500 | Yes | 17/32" (12) | 18" | 5" to 5.5" | 0000000 | 000000000 |
Use anchors to temporarily secure dollies to your floors. Each anchor has a notch that wraps around the stem of the dolly’s leveling foot to hold it in place. Tighten the foot’s wing nut for added holding power. When you need to move the dolly, slide the leveling foot out of the anchor’s notch. To secure one dolly, you’ll need three anchors—one for each leveling foot.
Overall | Floor Mount. Location | ||||||
|---|---|---|---|---|---|---|---|
| Ht. | Lg. | Wd. | Mounting Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Hole Center-to-Center | Each | |
Gray Powder-Coated Steel | |||||||
| 1 13/32" | 6 11/16" | 2 1/4" | No | 9/16" (2) | 5 3/16" | 0000000 | 000000 |
Telescoping Robot Workstations
For technical drawings and 3-D models, click on a part number.
Raise and lower your robot arm on these workstations, placing them at the right height for each task. Manually adjust the work surface at 1-in. intervals, or add a hydraulic lift kit (sold separately) for faster and more precise positioning. These workstations have swivel casters for easy transport from one job to the next—use the leveling pads to balance them on uneven floors. When using these workstations with a large arm, such as the FANUC CRX-25iA, anchor them to ensure stability and safety. Workstations have ample room for storing your controller, teach pendant, and other robot accessories.
Overall | Capacity, lbs. | Robot Mount. Location | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Robot Arm Manufacturer (Series/Model No.) | Ht. | Wd. | Dp. | Ht. | Adjustment Increments | Top | Overall | Foot Type | Mount. Hole Thread Size (No. of Holes) | Mount. Fasteners Included | Each | |
White Painted Steel | ||||||||||||
| FANUC (CR 4, CR 7, CR 7L; CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Doosan (M0609, M0617, M1013, M1509) Omron (TM 5, TM 12, TM 14) Universal Robots (UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e) | 38" | 40 1/4" | 36" | 30"-38" | 1" | 1,400 | 1,800 | Caster | M6 (4) M8 (24) M10 (8) M12 (6) | Yes | 0000000 | 000000000 |
Hydraulic lift kits save you time spent manually lifting or lowering the work surface, which requires adjusting bolts on all four workstation legs. These kits also allow for more precise positioning than manual adjustment, which only lets you set the height at 1-in. intervals. When used with a lift kit, top capacity for workstations is 700 lbs.
Cylinder | Cylinder Mtg. Holes | Pump Mtg. Holes | Switch Mtg. Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Material | No. of | Dia. | No. of | Dia. | No. of | Dia. | Mtg. Fasteners Included | Cord Lg., ft. | Specifications Met | Each | |
| 1 1/2" | Aluminum | 4 | 1/4" | 7 | 1/4" | 2 | 3/16" | No | 8 | CSA Certified, UL Listed | 00000000 | 000000000 |
Robot Workstations
For technical drawings and 3-D models, click on a part number.
These stations are a portable working home for your robot arm. Roll them between jobs and lock the casters in place while working. Keep the work surface even by adjusting the leveling feet. A controller mount secures your controller beneath the arm, out of harm’s way but easy to access.
Overall | Capacity, lbs | Robot Mount. Location | Controller Mount. Location | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Robot Arm Manufacturer (Series/Model No.) | Ht. | Wd. | Dp. | Top Thick. | Top | Overall | Foot Type | Includes | Mount. Hole Thread Size (No. of Holes) | Mount. Fasteners Included | Mount. Hole Thread Size (No. of Holes) | Mount. Fasteners Included | Each | |
Gray Powder-Coated Steel | ||||||||||||||
| FANUC (CRX 5iA, 10iA, 10iA/L) Universal Robots (UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e) Omron (TM 5, TM 12, TM 14) | 37 1/4" | 47 1/4" | 27 1/2" | 1/4" | 250 | 400 | Caster | Four Leveling Feet | M10 (8) M6 (4) | No | 5/16"-18 (12) | No | 0000000 | 000000000 |
Attach plates to platforms to keep workpieces positioned for easy, repeatable access. All include handles and locator mounting holes for securing them to platforms. Made of stainless steel, the plates stand up to corrosion.
Diamond plates are good for holding rectangular or cylindrical parts. Peg plates accept pegs (not included), which can be moved around to create custom layouts for parts with unique shapes. They come with rest pads that attach to the pegs for supporting heavy parts. Use blank plates for machining custom holes for your specific parts or when you want to weld components to the plate.
For short parts, you may need to add a blank plate for support, so the part can be accessed. For taller parts, you’ll need to use two plates spaced apart to act as a brace. Make sure the part’s center of gravity falls below the plate that is on top.
Overall | Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Lg. | Wd. | Dia. | Center-to-Center | No. of Holes | No. of Columns | No. of Rows | Each | |
Stainless Steel | |||||||||||
Diamond Plates | |||||||||||
| 27 3/4" | 20 3/4" | 0.135" | 1 3/16" | 1 3/16" | __ | 2" | 96 | 8 | 12 | 0000000 | 0000000 |
| 27 3/4" | 20 3/4" | 0.135" | 2 3/8" | 2 3/8" | __ | 3 15/16" | 24 | 4 | 6 | 0000000 | 000000 |
| 27 3/4" | 20 3/4" | 0.135" | 3 9/16" | 3 9/16" | __ | 5 1/2" | 12 | 3 | 4 | 0000000 | 000000 |
Peg Plates | |||||||||||
| 27 3/4" | 20 3/4" | 0.135" | __ | __ | 9/32" | 1" | 384 | 16 | 24 | 0000000 | 000000 |
Blank Plates | |||||||||||
| 27 3/4" | 20 3/4" | 0.135" | __ | __ | __ | __ | __ | __ | __ | 0000000 | 000000 |
Use pegs to create custom layouts on part presentation plates with peg holes. Each peg comes with a screw. Thread the screw through the peg hole from the back of the plate to mount the peg to the front of the plate. Another peg can be stacked on top of the mounted peg to support tall parts.
Overall | ||||||
|---|---|---|---|---|---|---|
| Lg. | Wd. | Stackable | Mount Type | Mounting Fasteners Included | Each | |
Aluminum | ||||||
| 1 1/8" | 3/8" | Yes | Threaded Insert | Yes | 0000000 | 000000 |