These large-surface lifters come with software, robot tool mounts, and connectors for quick setup and use with FANUC CRX robot arms. Using compressed air through multiple suction ports, they lift larger and heavier items than standard vacuum lifters. Also known as venturi devices, they generate suction without an installed vacuum system. To view data and adjust settings in a smartphone app, hold a phone that can read near-field communication (NFC) up to one of the NFC tags on these lifters. A digital display lets you read measurements while standing next to them.

These lifters have an IP40 rating, meaning that they keep out objects 1 mm or larger—such as wire—to protect their inner parts. They also meet ISO/TS 15066—with no pinch points or sharp edges, you can safely use them on robots that will be near people.

Lifters with cups grip irregularly shaped items better than lifters with a pad.

Lifters with a pad are better at lifting porous items than lifters with cups, and are also less likely to damage delicate surfaces.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

The flexible balloon-like cup on these lifters use compressed air to grip, lift, and move items with curves, angles, and varied heights. Unlike other more rigid lifters, these are designed to conform to irregular shapes for a secure hold. Also known as venturi devices, they generate suction without an installed vacuum system.

These lifters have a lightweight aluminum housing that withstands corrosion and a Buna-N rubber cup that resists abrasion and oil. The cup is secured to the housing with two stainless steel spring bands. The bands won’t rust and can be easily removed to replace a worn cup. Inside the cup is a rubber cushion that protects items from damage if they come in contact with the housing as they are lifted. One replacement cup is included. These lifters also have a metal filter, which keeps contaminants from entering the vacuum passage.

Use the additional port on these lifters with a pressure transmitter (not included). Your transmitter will convert air pressure to an electrical signal for viewing air measurements on remote displays and programmable logic controllers (PLCs). You can also use the port to create a burst of air for removing debris in the vacuum passage or releasing items that didn’t drop when the vacuum stopped.

To connect these lifters to robot arms, drill holes in robot tool mounts to match the mounting holes on the lifter. If you don't see your robot model number listed, measure the bolt circle diameter to determine mounting compatibility. All of these mounts resist corrosion. Aluminum mounts are lightweight, helping your robot arm stay under its payload limit, or the total capacity a robot can lift. They’re also more machinable than stainless steel. 304 stainless steel mounts are often used in washdown environments, such as food-processing plants, since they won't corrode from frequent washdowns. They’re stronger than aluminum, but also heavier and less machinable.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Grip, lift, and move food as well as other items with curves, angles, and varied heights in food-processing plants. All of these lifters have a flexible balloon-like cup that’s made of FDA-compliant silicone rubber, so they’re safe for direct contact with food. Unlike other more rigid lifters, these are designed to conform to irregular shapes for a secure hold. Use these lifters with compressed air. Also known as venturi devices, they generate suction without an installed vacuum system.

All of these lifters have a lightweight aluminum housing that withstands corrosion. The cup is secured to the housing with two stainless steel spring bands. The bands stand up to rust and can be easily removed to replace a worn cup. Inside the cup is a rubber cushion that protects items from damage if they come in contact with the housing as they are lifted. One replacement cup is included. These lifters also have a metal filter, which keeps contaminants from entering the vacuum passage.

Use the additional port on these lifters with a pressure transmitter (not included). Your transmitter will convert air pressure to an electrical signal for viewing air measurements on remote displays and programmable logic controllers (PLCs). You can also use the port to create a burst of air for removing debris in the vacuum passage or releasing items that didn’t drop when the vacuum stopped.

Metal-detectable lifters have a cup that contains metal additives that will set off metal detectors if the cup or any piece of it falls into your food line. Use them to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs.

To connect these lifters to robot arms, drill holes in robot tool mounts to match the mounting holes on the lifter. If you don't see your robot model number listed, measure the bolt circle diameter to determine mounting compatibility. All of these mounts resist corrosion. Aluminum mounts are lightweight, helping your robot arm stay under its payload limit, or the total capacity a robot can lift. They’re also more machinable than stainless steel. 304 stainless steel mounts are often used in washdown environments, such as food-processing plants, since they won't corrode from frequent washdowns. They’re stronger than aluminum, but also heavier and less machinable.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.