Protect connections in washdown environments while maintaining access—these RJ45 plugs and adapters latch together securely, yet quickly detach. When mated, they’re rated IP65 and IP67 for protection against washdowns and temporary submersion. All are shielded to prevent electromagnetic interference.

Adapters have an attached cover to maintain the IP67 rating when not in use.

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment. They can also power devices as they send data, so you don’t need a separate power cord. But, the device must be Power over Ethernet (PoE) compatible. These connectors are often used with EtherNet/IP, Profinet, and EtherCAT systems. Since they’re shielded, they block signal interference from nearby devices, maintaining their speed and data integrity. Poles and keyways on the face adhere to standard coding layouts to reduce the chance you’ll mismatch connections.

When choosing an Ethernet connector, make sure you match or exceed your network’s category industry designation. These connectors are backward compatible—for example, a Category 6 connector will work in a Category 5 network, but it’ll only run at the Category 5 speed.

A-coded and X-coded connectors send data faster than D-coded connectors, so they’re best for robotics and other systems that run multi-step programs.

Adapters create a transition point between an M12 and RJ45 connection. Use them in panels or walls—your tough threaded connection on one side and your control panel and computer or PLC on the other.

90° elbow connectors run your cord along the side of equipment, so they fit behind machines and in tight spaces.

IP rated connectors keep out dust and can be used in wet areas when mated or capped. IP65 connectors can be lightly rinsed. IP67 connectors can be submerged temporarily.

Add caps to protect connectors and maintain their IP ratings when not in use.

Install these connectors in a panel cutout to create a port for transferring data. You use a punch-down tool to terminate, so there’s no need for wire stripping. To make setup quick and easy, these connectors come with a color-coded wiring guide.

Shielded connectors protect equipment from electromagnetic interference.

Choose unshielded connectors when signal interference isn’t a concern.

Add a cap to protect these connectors when not in use.

For technical drawings and 3-D models, click on a part number.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout. They send data between computers, printers, servers, and switches. For faster data transmission speeds, choose a cord with a higher ethernet cable category. All are backward compatible, so they work in networks that meet the same or a lower category.

Screw-on cords require you to drill mounting holes and use fasteners to mount them in a panel cutout.

Screw-in cords simply thread into panel cutouts. Use them on panels that are 1.5 mm to 5 mm thick.

Add an optional cap to protect the end of screw-in cords when not in use. Hinged caps open and shut quickly at a fixed angle, so they’re more convenient for frequent access than tethered caps. Tethered caps can open in any direction, letting you access the end of the cord from any angle.

Label holders (sold separately) snap onto the end of the cords.

For technical drawings and 3-D models, click on a part number.