About Nuts, Materials, and Finishes
More
Rivet Nuts for Plastic and Composites
Add strong, permanent threads to plastic and composites. As you install these rivet nuts, a large backside flange forms to distribute loads across a broad area. Installation requires access to only one side of your material. Secure them in a drilled or punched round hole in thin surfaces with a rivet nut tool. Made of zinc yellow-chromate-plated steel, these nuts are suitable for wet environments.
Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Body | Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size  | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | No. of Folding Sides | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate-Plated Steel | ||||||||||||
| 10-24 | R | 0.020" to 0.175" | Bulbed | 0.329" | 0.828" | 0.410" | 0.510" | 0.038" | 4 | 10 | 000000000 | 00000 |
| 10-24 | R | 0.175" to 0.320" | Bulbed | 0.329" | 0.921" | 0.410" | 0.510" | 0.038" | 4 | 5 | 000000000 | 0000 |
| 10-32 | R | 0.020" to 0.175" | Bulbed | 0.329" | 0.828" | 0.410" | 0.510" | 0.038" | 4 | 10 | 000000000 | 0000 |
| 10-32 | R | 0.175" to 0.320" | Bulbed | 0.329" | 0.921" | 0.410" | 0.510" | 0.038" | 4 | 10 | 000000000 | 00000 |
| 1/4"-20 | X | 0.020" to 0.280" | Bulbed | 0.382" | 1.000" | 0.505" | 0.645" | 0.059" | 4 | 10 | 000000000 | 0000 |
| 1/4"-20 | X | 0.280" to 0.500" | Bulbed | 0.382" | 1.234" | 0.505" | 0.645" | 0.059" | 4 | 5 | 000000000 | 0000 |
| 5/16"-18 | 1/2" | 0.020" to 0.280" | Bulbed | 0.495" | 1.141" | 0.570" | 0.770" | 0.062" | 4 | 5 | 000000000 | 0000 |
| 5/16"-18 | 1/2" | 0.280" to 0.500" | Bulbed | 0.495" | 1.375" | 0.570" | 0.770" | 0.062" | 4 | 5 | 000000000 | 0000 |
Thread | Body | Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Material Thick., mm | Type | Dia., mm | Lg., mm | Installed Lg., mm | Dia., mm | Thick., mm | No. of Folding Sides | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate-Plated Steel | |||||||||||||
| M5 | 0.8 | R | 0.5 to 4.5 | Bulbed | 8.4 | 21 | 10.0 | 13 | 1 | 4 | 10 | 000000000 | 00000 |
| M5 | 0.8 | R | 4.5 to 8.1 | Bulbed | 8.4 | 23.8 | 10.0 | 13 | 1 | 4 | 10 | 000000000 | 0000 |
| M6 | 1 | 10 mm | 0.5 to 7.1 | Bulbed | 9.7 | 25.4 | 12.8 | 16.4 | 1.5 | 4 | 10 | 000000000 | 0000 |
| M6 | 1 | 10 mm | 7.1 to 12.7 | Bulbed | 9.7 | 31.3 | 12.8 | 16.4 | 1.5 | 4 | 10 | 000000000 | 0000 |
| M8 | 1.25 | 1/2" | 0.5 to 7.1 | Bulbed | 12.6 | 29 | 14.5 | 19.7 | 1.6 | 4 | 5 | 000000000 | 0000 |
| M8 | 1.25 | 1/2" | 7.1 to 12.7 | Bulbed | 12.6 | 34.9 | 14.5 | 19.7 | 1.6 | 4 | 5 | 000000000 | 0000 |
Screw-to-Install Rivet Nuts
Install a rivet nut with only a screw—no special installation tool required. Also known as jack nuts, these rivet nuts have large slits in the body that collapse and flare out to create a flange on the back of your material as you thread in a screw. That backside flange distributes force, so these rivet nuts won't pull through thin material. Use them to add reusable threads to sheet metal and other material that can't be tapped. Unlike press-fit nuts, you only need access to one side to install. They're zinc-plated, so they resist corrosion in wet environments. Length is measured from under the flange.
For even quicker installation than threading a screw, use a rivet nut tool.
For technical drawings and 3-D models, click on a part number.
Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Dia. | Thick. | No. of Folding Sides | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||
| 6-32 | 5/16" | 0.188" to 0.375" | Bulbed | 0.335" | 0.866" | 0.488" | 0.073" | 4 | 25 | 000000000 | 000000 |
| 6-32 | 21/64" | 0.016" to 0.188" | Bulbed | 0.335" | 0.661" | 0.48" | 0.063" | 4 | 25 | 000000000 | 00000 |
| 10-24 | 3/8" | 0.016" to 0.188" | Bulbed | 0.38" | 0.716" | 0.531" | 0.073" | 3 | 25 | 000000000 | 00000 |
| 10-24 | 3/8" | 0.188" to 0.375" | Bulbed | 0.38" | 0.888" | 0.531" | 0.073" | 3 | 25 | 000000000 | 00000 |
| 1/4"-20 | 7/16" | 0.016" to 0.188" | Bulbed | 0.492" | 0.732" | 0.63" | 0.063" | 4 | 25 | 000000000 | 00000 |
| 1/4"-20 | 7/16" | 0.188" to 0.375" | Bulbed | 0.472" | 0.902" | 0.63" | 0.073" | 4 | 25 | 000000000 | 00000 |
| 5/16"-18 | 19/32" | 0" to 0.197" | Bulbed | 0.61" | 0.748" | 0.709" | 0.071" | 3 | 25 | 000000000 | 00000 |
| 5/16"-18 | 19/32" | 0.197" to 0.315" | Bulbed | 0.61" | 0.945" | 0.709" | 0.071" | 3 | 25 | 000000000 | 00000 |
Thread | Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Material Thick., mm | Type | Dia., mm | Length, mm | Dia., mm | Thick., mm | No. of Folding Sides | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||||
| M4 | 0.7 | 8 mm | 0 to 5 | Bulbed | 8.5 | 16.8 | 12.4 | 1.6 | 3 | 25 | 000000000 | 000000 |
| M4 | 0.7 | 8 mm | 5 to 10 | Bulbed | 8.5 | 22 | 12.4 | 1.6 | 3 | 25 | 000000000 | 00000 |
| M5 | 0.8 | 10 mm | 0 to 5 | Bulbed | 10.5 | 18.4 | 14 | 1.6 | 3 | 25 | 000000000 | 00000 |
| M5 | 0.8 | 10 mm | 5 to 10 | Bulbed | 10.5 | 23.2 | 14 | 1.6 | 3 | 25 | 000000000 | 00000 |
| M6 | 1 | 12 mm | 0 to 5 | Bulbed | 12.5 | 18.6 | 16 | 1.6 | 3 | 25 | 000000000 | 00000 |
| M6 | 1 | 12 mm | 5 to 10 | Bulbed | 12.5 | 22.9 | 16 | 1.6 | 3 | 25 | 000000000 | 00000 |
| M8 | 1.25 | 15 mm | 0 to 5 | Bulbed | 15.5 | 19 | 18 | 1.8 | 3 | 25 | 000000000 | 00000 |
| M8 | 1.25 | 15 mm | 5 to 8 | Bulbed | 15.5 | 24 | 18 | 1.8 | 3 | 25 | 000000000 | 00000 |
Scratch-Resistant Screw-to-Install Rivet Nuts
A PVC coating minimizes scratches to the surface of your material and makes these rivet nuts more corrosion resistant than zinc-plated steel nuts. Install these nuts in sheet metal with only a screw, no special tools required. Large slits in the body collapse and flare out as you thread the screw in, creating a flange on the back of your material. That backside flange distributes force, preventing these rivet nuts from pulling through thin surfaces. They add permanent threads into material that’s too thin to be tapped. Installation requires access to only one side of your surface.
For even quicker installation than threading a screw, use a rivet nut tool. Length is measured from under the flange.
For technical drawings and 3-D models, click on a part number.
Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Dia. | Thick. | No. of Folding Sides | Pkg. Qty. | Pkg. | |
PVC Plastic-Coated Steel | |||||||||||
| 6-32 | 5/16" | 0" to 0.197" | Bulbed | 0.335" | 0.661" | 0.488" | 0.063" | 3 | 10 | 000000000 | 000000 |
| 10-24 | 25/64" | 0" to 0.197" | Bulbed | 0.413" | 0.724" | 0.551" | 0.063" | 4 | 10 | 000000000 | 00000 |
| 1/4"-20 | 7/16" | 0.188" to 0.375" | Bulbed | 0.472" | 0.902" | 0.63" | 0.073" | 4 | 10 | 000000000 | 00000 |
| 1/4"-20 | 15/32" | 0" to 0.197" | Bulbed | 0.492" | 0.732" | 0.63" | 0.063" | 4 | 10 | 000000000 | 00000 |
| 5/16"-18 | 19/32" | 0" to 0.197" | Bulbed | 0.61" | 0.748" | 0.709" | 0.07" | 4 | 10 | 000000000 | 00000 |
Thread | Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Material Thick., mm | Type | Dia., mm | Lg., mm | Dia., mm | Thick., mm | No. of Folding Sides | Pkg. Qty. | Pkg. | |
PVC Plastic-Coated Steel | ||||||||||||
| M5 | 0.8 | 10 mm | 0 to 5 | Bulbed | 10.5 | 18.4 | 14 | 1.6 | 4 | 10 | 000000000 | 000000 |
| M6 | 1 | 12 mm | 0 to 5 | Bulbed | 12.5 | 18.6 | 16 | 1.6 | 4 | 10 | 000000000 | 00000 |
| M8 | 1.25 | 15 mm | 0 to 5 | Bulbed | 15.5 | 19 | 18 | 1.8 | 4 | 10 | 000000000 | 00000 |
Sealing Screw-to-Install Rivet Nuts
To block out moisture and resist corrosion in wet environments, these steel rivet nuts have an acrylic-coated flange and a zinc-plated body. Install them in sheet metal with only a screw, no special tools required. As you thread the screw in, large slits on the body collapse and flare out, creating a flange on the back of your material. That backside flange distributes force, so these rivet nuts won't pull through thin surfaces. They add permanent threads into material that’s too thin to be tapped. Installation requires access to only one side of your surface.
For even quicker installation than threading a screw, use a rivet nut tool. Length is measured from under the flange.
For technical drawings and 3-D models, click on a part number.
Body | Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Dia. | Thick. | No. of Folding Sides | Seal Material | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||||
| 6-32 | 5/16" | 0" to 0.197" | Bulbed | 0.335" | 0.661" | 0.49" | 0.073" | 4 | Acrylic Plastic | 10 | 000000000 | 000000 |
| 10-24 | 25/64" | 0" to 0.197" | Bulbed | 0.413" | 0.724" | 0.55" | 0.073" | 4 | Acrylic Plastic | 10 | 000000000 | 00000 |
| 1/4"-20 | 7/16" | 0" to 0.197" | Bulbed | 0.492" | 0.732" | 0.63" | 0.073" | 4 | Acrylic Plastic | 10 | 000000000 | 00000 |
| 1/4"-20 | 7/16" | 0.187" to 0.375" | Bulbed | 0.492" | 0.902" | 0.63" | 0.073" | 4 | Acrylic Plastic | 10 | 000000000 | 00000 |
| 5/16"-18 | 19/32" | 0" to 0.197" | Bulbed | 0.61" | 0.748" | 0.71" | 0.081" | 4 | Acrylic Plastic | 10 | 000000000 | 00000 |
Thread | Body | Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Material Thick., mm | Type | Dia., mm | Lg., mm | Dia., mm | Thick., mm | No. of Folding Sides | Seal Material | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||||
| M5 | 0.8 | 10 mm | 0 to 5 | Bulbed | 10.5 | 18.4 | 14 | 1.6 | 4 | Acrylic Plastic | 10 | 000000000 | 000000 |
| M6 | 1 | 12 mm | 0 to 5 | Bulbed | 12.5 | 18.6 | 16 | 1.6 | 4 | Acrylic Plastic | 10 | 000000000 | 00000 |
| M8 | 1.25 | 15 mm | 0 to 5 | Bulbed | 15.5 | 19 | 18 | 1.6 | 4 | Acrylic Plastic | 10 | 000000000 | 00000 |
Wrench-Driven Rivet Nut Tools
Use these tools to install most styles of rivet nuts. A wrench and ratchet are required to hold the tool and tighten the nut.
For technical drawings and 3-D models, click on a part number.
| For Thread Size | For Wrench Size | For Ratchet Size | For Rivet Nut Body Type | For Rivet Nut Material | Each | |
| 4-40 | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 000000 |
| 6-32 | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| 8-32 | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| 10-24, 10-32 | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| 12-24 | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| 1/4"-20, 1/4"-28 | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| 5/16"-18, 5/16"-24 | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| 3/8"-16, 3/8"-24 | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| 1/2"-13 | 7/8" | 7/8" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| 1/2"-20 | 7/8" | 7/8" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| M3 × 0.5 mm | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| M4 × 0.7 mm | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| M5 × 0.8 mm | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| M6 × 1 mm | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| M8 × 1.25 mm | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| M10 × 1.5 mm | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
| M12 × 1.75 mm | 7/8" | 7/8" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 00000 |
Air-Powered Rivet Nut Tools
Smaller and lighter than cordless and hydraulic rivet nut tools, use these to install thin-walled bulbed, ribbed, sleeve, and smooth rivet nuts. To use, thread the nut onto the included mandrel and press the trigger to spin the nut onto the tool. Place the nut into the material and press the trigger to install the nut. Press the trigger one more time to spin the mandrel off.
Air Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Thread Size | For Rivet Nut Body Type | For Rivet Nut Material | Head Lg. | Overall Ht. | Operating Pressure, psi | Pipe Size | Thread Type | Weight, lbs. | Includes | Each | |
| 4-40 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 35 to 45 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 0000000 |
| 6-32 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 70 to 80 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| 8-32 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 70 to 80 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| 10-24 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 70 to 80 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| 10-32 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 70 to 80 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| 1/4"-20 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 70 to 80 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| 1/4"-28 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 70 to 80 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| 5/16"-18 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 90 to 110 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| 5/16"-24 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 90 to 110 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| 3/8"-16 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 90 to 110 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| 3/8"-24 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 90 to 110 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| 1/2"-13 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 7 1/4" | 6" | 90 to 110 | 1/4 | NPT | 4 | Mandrel, Nosepiece | 000000000 | 00000000 |
| 1/2"-20 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 7 1/4" | 6" | 90 to 110 | 1/4 | NPT | 4 | Mandrel, Nosepiece | 000000000 | 00000000 |
| M3 × 0.5 mm | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 35 to 45 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| M4 × 0.7 mm | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 35 to 45 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| M5 × 0.8 mm | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 70 to 80 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| M6 × 1 mm | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 70 to 80 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| M8 × 1.25 mm | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 90 to 110 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| M10 × 1.5 mm | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 90 to 110 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 000000 |
| M12 × 1.75 mm | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 7 1/4" | 6" | 90 to 110 | 1/4 | NPT | 4 | Mandrel, Nosepiece | 000000000 | 00000000 |
| For Thread Size | Each | |
| 4-40 | 000000000 | 00000 |
| 6-32 | 000000000 | 000 |
| 8-32 | 000000000 | 000 |
| 10-24 | 000000000 | 0000 |
| 10-32 | 000000000 | 0000 |
| 1/4"-20 | 000000000 | 0000 |
| 1/4"-28 | 000000000 | 0000 |
| 5/16"-18 | 000000000 | 0000 |
| 5/16"-24 | 000000000 | 0000 |
| 3/8"-16 | 000000000 | 0000 |
| 3/8"-24 | 000000000 | 0000 |
| 1/2"-13 | 000000000 | 0000 |
| 1/2"-20 | 000000000 | 0000 |
| M3 × 0.5 mm | 000000000 | 0000 |
| M4 × 0.7 mm | 000000000 | 0000 |
| M5 × 0.8 mm | 000000000 | 0000 |
| M6 × 1 mm | 000000000 | 0000 |
| M8 × 1.25 mm | 000000000 | 0000 |
| M10 × 1.5 mm | 000000000 | 0000 |
| M12 × 1.75 mm | 000000000 | 0000 |
| For Thread Size | Includes | Each | |
| 4-40 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 0000000 |
| 6-32 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| 8-32 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| 10-24 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| 10-32 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| 1/4"-20 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| 1/4"-28 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| 5/16"-18 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| 5/16"-24 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| 3/8"-16 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| 3/8"-24 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| 1/2"-13 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| 1/2"-20 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| M3 × 0.5 mm | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| M4 × 0.7 mm | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| M5 × 0.8 mm | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| M6 × 1 mm | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| M8 × 1.25 mm | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| M10 × 1.5 mm | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
| M12 × 1.75 mm | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 000000 |
Hydraulic/Air-Powered Rivet Nut Tools
Quickly install all styles of rivet nuts at 1.5-second intervals. The tool includes nosepiece assemblies to install M4, M5, M6, and M8 rivet nuts (additional sizes sold separately). To use, thread the nut onto the included mandrel and press the trigger to spin the nut onto the tool. Place the nut into the material and press the trigger to install the nut. Press the trigger one more time to spin the mandrel off.
Body | Air Connection | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Thread Size | For Rivet Nut Body Type | For Rivet Nut Material | Dia. | Wd. | Head Lg. | Overall Ht. | Max. Stroke Lg. | Pulling Force | Operating Pressure, psi | Pipe Size | Thread Type | Weight, lbs. | Each | |
| 4-40, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M4, M5, M6, M8, M10 | Smooth, Ribbed, Hex, Bulbed, Sleeve, Stud | Aluminum, Steel | 3 3/4" | 1 1/16" | 9 5/8" | 10 3/4" | 0.275" | 3,960 lbs | 75 to 100 | 1/4 | NPT | 3 1/2 | 000000000 | 000000000 |
| For Thread Size | Each | |
| 4-40 | 000000000 | 000000 |
| 8-32 | 000000000 | 000000 |
| 10-24 | 000000000 | 000000 |
| 10-32 | 000000000 | 000000 |
| 1/4"-20 | 000000000 | 000000 |
| 1/4"-28 | 000000000 | 000000 |
| 5/16"-18 | 000000000 | 000000 |
| 5/16"-24 | 000000000 | 000000 |
| 3/8"-16 | 000000000 | 000000 |
| 3/8"-24 | 000000000 | 000000 |
| M4 × 0.7 mm | 000000000 | 000000 |
| M5 × 0.8 mm | 000000000 | 000000 |
| M6 × 1 mm | 000000000 | 000000 |
| M8 × 1.25 mm | 000000000 | 000000 |
| M10 × 1.5 mm | 000000000 | 000000 |
| Includes | Each | |
| Hex Key Wrench, Pin-Removal Punch, Spanner Wrench | 000000000 | 000000 |
Light Duty Plier-Style Rivet Nut Tools
Install screw-to-install rivet nuts and rivet nuts for plastic and composites. Thread the rivet nut onto the pull rod (required, sold separately), insert the nut into the hole, and squeeze the handles to secure the nut. Friction wrenches designed to hold the nut head during installation are also available and sold separately.
Rivet Nut Tools | Friction Wrenches | ||||
|---|---|---|---|---|---|
| For Steel Rivet Nut Thread Size | For Rivet Nut Body Type | Each | Each | ||
| 6-32, 10-24, 1/4"-20, M4, M5, M6 | Bulbed | 000000000 | 000000 | 000000000 | 00000 |
| Required Pull Rods for ¼"-20 Thread | 000000000 | Each | 0000000 |
| Required Pull Rods for M6 Thread | 000000000 | Each | 00000 |
| Required Pull Rods for 6-32 Thread | 000000000 | Each | 000000 |
| Required Pull Rods for M5 Thread | 000000000 | Each | 000000 |
| Required Pull Rods for 10-24 Thread | 000000000 | Each | 00000 |
| Required Pull Rods for M4 Thread | 000000000 | Each | 00000 |
Tools for Blind Rivets and Rivet Nuts
This tool has changeable nosepieces, anvils, and pull-up studs for installing rivets and rivet nuts. A self-contained hydraulic system delivers additional force to make installation easier. Choose the attachment that matches your rivet's diameter or nut thread size. To install a rivet, insert the mandrel into the nosepiece of the tool. Place the rivet in the material and squeeze the handles. The tool pulls the mandrel through the rivet's body, creating a secure hold on both sides of the material, and breaks off the excess mandrel.
Pull-up studs and driving anvils for 6-32 to 3/8"-16 and M3 to M10 rivet nuts are sold separately.
For technical drawings and 3-D models, click on a part number.
Nose | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Lg. | Ht. | For Rivet Nut Thread Size | For Rivet Nut Body Type | For Rivet Nut Material | Hydraulic Oil Included | Includes | Each | |
| 1 1/16" | 2 1/4" | 9 1/2" | 6 3/8" | 1/4"-20, 1/4"-28, 10-24, 10-32, 3/8"-16, 5/16"-18, 6-32, 8-32, M10, M3, M4, M5, M6, M8 | Bulbed, Sleeve, Smooth, Hex, Ribbed | Aluminum, Steel | Yes | Five nosepieces (3/32", 1/8", 5/32", 3/16", and 1/4") Two anvils (10-24 and 1/4"-20) Two pull-up studs (10-24 and 1/4"-20) | 0000000 | 0000000 |
| For Rivet Nut Thread Size | Lg. | Each | |
| 6-32 | 1 9/16" | 00000000 | 000000 |
| 8-32 | 1 1/4" | 00000000 | 00000 |
| 10-24 | 1 1/2" | 00000000 | 00000 |
| 10-32 | 1 1/2" | 00000000 | 00000 |
| 1/4"-20 | 1 13/16" | 00000000 | 00000 |
| 1/4"-28 | 1 1/2" | 00000000 | 00000 |
| 5/16"-18 | 2 1/8" | 00000000 | 00000 |
| 3/8"-16 | 2 1/8" | 0000000 | 00000 |
| M3 | 1 1/2" | 0000000 | 00000 |
| M4 | 1 7/16" | 00000000 | 00000 |
| M5 | 1 3/8" | 00000000 | 00000 |
| M6 | 1 13/16" | 00000000 | 00000 |
| M8 | 2" | 00000000 | 00000 |
| M10 | 1 7/16" | 00000000 | 00000 |