Hollow Rivets
Installed
Use these rivets to fasten soft material such as leather, fabric, and plastic. Installation requires access to both sides of the material. Use a hollow rivet tool (sold separately) and a hammer to flare out the hollow portion of the rivet.
Hollow-end rivets are also known as semi-tubular and brake-lining rivets. The bottom half of the body is hollow and because it is the only part of the rivet that expands during installation, they are often used as pivot points.
For technical drawings and 3-D models, click on a part number.
Hollow-End Rivets
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Internal Hole Dp. | Countersink Angle  | Material | Pkg. Qty. | Pkg. | |
9/64" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.159"-0.173" | 0.25" | 0.156" | No. 23 | 0.313" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 000000 |
| 0.19"-0.204" | 0.281" | 0.156" | No. 23 | 0.313" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.221"-0.235" | 0.313" | 0.156" | No. 23 | 0.313" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.221"-0.235" | 0.313" | 0.156" | No. 23 | 0.375" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.284"-0.298" | 0.375" | 0.156" | No. 23 | 0.313" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.284"-0.298" | 0.375" | 0.156" | No. 23 | 0.375" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.346"-0.36" | 0.438" | 0.156" | No. 23 | 0.313" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.346"-0.36" | 0.438" | 0.156" | No. 23 | 0.375" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.409"-0.423" | 0.5" | 0.156" | No. 23 | 0.313" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.409"-0.423" | 0.5" | 0.156" | No. 23 | 0.375" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.534"-0.548" | 0.625" | 0.156" | No. 23 | 0.375" | 0.047" | 0.125" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.659"-0.673" | 0.75" | 0.156" | No. 23 | 0.375" | 0.047" | 0.125" | 150° | Brass | 50 | 000000000 | 00000 |
3/16" Dia. | |||||||||||
| 0.128"-0.147" | 0.25" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.191"-0.209" | 0.313" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.253"-0.272" | 0.375" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.316"-0.334" | 0.438" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.378"-0.397" | 0.5" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.378"-0.397" | 0.5" | 0.199" | No. 8 | 0.5" | 0.063" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.441"-0.459" | 0.563" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.503"-0.522" | 0.625" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.503"-0.522" | 0.625" | 0.199" | No. 8 | 0.5" | 0.063" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.628"-0.647" | 0.75" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.628"-0.647" | 0.75" | 0.199" | No. 8 | 0.5" | 0.063" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.753"-0.772" | 0.875" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.753"-0.772" | 0.875" | 0.199" | No. 8 | 0.5" | 0.063" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.878"-0.897" | 1" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.878"-0.897" | 1" | 0.199" | No. 8 | 0.5" | 0.063" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
1/4" Dia. | |||||||||||
| 0.338"-0.363" | 0.5" | 0.265" | 17/64" | 0.5" | 0.063" | 0.25" | 150° | Brass | 25 | 000000000 | 0000 |
| 0.463"-0.488" | 0.625" | 0.265" | 17/64" | 0.5" | 0.063" | 0.25" | 150° | Brass | 25 | 000000000 | 00000 |
| 0.588"-0.613" | 0.75" | 0.265" | 17/64" | 0.5" | 0.063" | 0.25" | 150° | Brass | 25 | 000000000 | 00000 |
| 0.713"-0.738" | 0.875" | 0.265" | 17/64" | 0.5" | 0.063" | 0.25" | 150° | Brass | 25 | 000000000 | 00000 |
| 0.838"-0.863" | 1" | 0.265" | 17/64" | 0.5" | 0.063" | 0.25" | 150° | Brass | 25 | 000000000 | 00000 |
Hollow-Body Rivets
Hollow Body
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Internal Hole Dp. | Countersink Angle | Material | Pkg. Qty. | Pkg. | |
9/64" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.147"-0.167" | 0.25" | 0.152" | No. 24 | 0.313" | 0.047" | 0.219" | 150° | Copper-Plated Steel | 50 | 000000000 | 000000 |
| 0.272"-0.292" | 0.375" | 0.152" | No. 24 | 0.313" | 0.047" | 0.313" | 150° | Copper-Plated Steel | 50 | 000000000 | 00000 |
Tools for Hollow Rivets
One of these tools and a hammer are all you need to expand the base of hollow (tubular) and hollow-end (semi-tubular) rivets. Place the tool over the hollow end of the rivet, then strike with a hammer. The rivet’s end will flare out to fasten your material.
For technical drawings and 3-D models, click on a part number.
| For Rivet Dia. | For Rivet Material | Dia. | Lg. | Material | Each | |
| 1/16" | Aluminum, Steel, Copper, Brass | 5/16" | 3 1/2" | Steel | 00000000 | 000000 |
| 0.087" | Aluminum, Steel, Copper, Brass | 3/8" | 4 1/4" | Steel | 00000000 | 00000 |
| 1/8" | Aluminum, Steel, Copper, Brass | 3/8" | 4 1/4" | Steel | 000000 | 00000 |
| 9/64" | Aluminum, Steel, Copper, Brass | 1/2" | 5" | Steel | 000000 | 00000 |
| 5/32" | Aluminum, Steel, Copper, Brass | 1/2" | 5" | Steel | 000000 | 00000 |
| 3/16" | Aluminum, Steel, Copper, Brass | 1/2" | 5" | Steel | 000000 | 00000 |
| 7/32" | Aluminum, Steel, Copper, Brass | 1/2" | 5" | Steel | 000000 | 00000 |
| 1/4" | Aluminum, Steel, Copper, Brass | 1/2" | 5" | Steel | 000000 | 00000 |
| 5/16" | Aluminum, Steel, Copper, Brass | 5/8" | 5" | Steel | 000000 | 00000 |