About Installing Blind Rivets
More
Choose-a-Color Domed Head Blind Rivets
Select a color to make your rivets stand out or blend in. These rivets join material when you only have access to one side. Made of aluminum, they are lightweight, nonmagnetic, and have good corrosion resistance. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs.  | Material | Specifications Met | Color | Pkg. Qty. | Pkg. | |
1/8" Dia. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.063"-0.125" | 0.275" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 120 | 150 | 5052 Aluminum | IFI 114 Standards | White | 250 | 000000000 | 000000 |
| 0.126"-0.187" | 0.337" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 120 | 150 | 5052 Aluminum | IFI 114 Standards | White | 250 | 000000000 | 00000 |
| 0.188"-0.25" | 0.4" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 120 | 150 | 5052 Aluminum | IFI 114 Standards | White | 250 | 000000000 | 00000 |
| 0.251"-0.312" | 0.462" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 120 | 150 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
| 0.313"-0.375" | 0.525" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 120 | 150 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
5/32" Dia. | |||||||||||||
| 0.063"-0.125" | 0.299" | 0.16"-0.164" | No. 20 | 0.312" | 0.049" | 190 | 230 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
| 0.126"-0.187" | 0.362" | 0.16"-0.164" | No. 20 | 0.312" | 0.049" | 190 | 230 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
| 0.188"-0.25" | 0.425" | 0.16"-0.164" | No. 20 | 0.312" | 0.049" | 190 | 230 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
| 0.25"-0.375" | 0.549" | 0.16"-0.164" | No. 20 | 0.312" | 0.049" | 190 | 230 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
3/16" Dia. | |||||||||||||
| 0.126"-0.25" | 0.45" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 260 | 320 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
| 0.251"-0.375" | 0.575" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 260 | 320 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
| 0.376"-0.5" | 0.7" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 260 | 320 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
1/4" Dia. | |||||||||||||
| 0.126"-0.25" | 0.5" | 0.257"-0.261" | F | 0.5" | 0.08" | 460 | 560 | 5052 Aluminum | IFI 114 Standards | White | 50 | 000000000 | 00000 |
| 0.251"-0.375" | 0.625" | 0.257"-0.261" | F | 0.5" | 0.08" | 460 | 560 | 5052 Aluminum | IFI 114 Standards | White | 50 | 000000000 | 00000 |
Choose-a-Color Wide-Thickness-Range Domed Head Blind Rivets
Select a color to make your rivets stand out or blend in. These rivets grip a much wider range of material thicknesses than standard blind rivets. Made of aluminum, they are lightweight, nonmagnetic, and have good corrosion resistance. Use to join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Material | Specifications Met | Color | Pkg. Qty. | Pkg. | |
Steel Mandrel | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" Dia. | |||||||||||||
| 0.032"-0.437" | 0.605" | 0.129"-0.142" | No. 30 | 0.262" | 0.04" | 150 | 220 | 5000 Series Aluminum | IFI 114 Standards | White | 100 | 000000000 | 000000 |
| 0.157"-0.312" | 0.525" | 0.129"-0.142" | No. 30 | 0.262" | 0.04" | 150 | 220 | 5000 Series Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
3/16" Dia. | |||||||||||||
| 0.032"-0.375" | 0.575" | 0.196"-0.205" | No. 11 | 0.394" | 0.06" | 350 | 500 | 5000 Series Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
| 0.063"-0.25" | 0.45" | 0.196"-0.205" | No. 11 | 0.394" | 0.06" | 350 | 500 | 5000 Series Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
| 0.251"-0.5" | 0.7" | 0.196"-0.205" | No. 11 | 0.394" | 0.06" | 350 | 500 | 5000 Series Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
Choose-a-Color Large-Diameter Domed Head Blind Rivets
Select a color to make your rivets stand out or blend in. These rivets have a 50% larger head diameter than standard domed head blind rivets, distributing pressure where the head meets the material surface. Use for covering irregular holes as well as extra holding power when fastening soft, thin materials to a rigid backing. Made of aluminum, rivets are lightweight, nonmagnetic, and have good corrosion resistance. They join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Material | Specifications Met | Color | Pkg. Qty. | Pkg. | |
1/8" Dia. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.063"-0.125" | 0.275" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 120 | 150 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
| 0.126"-0.187" | 0.337" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 120 | 150 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 0000 |
| 0.188"-0.25" | 0.4" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 120 | 150 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
5/32" Dia. | |||||||||||||
| 0.188"-0.25" | 0.425" | 0.16"-0.164" | No. 20 | 0.475" | 0.075" | 190 | 230 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
| 0.251"-0.375" | 0.549" | 0.16"-0.164" | No. 20 | 0.475" | 0.075" | 190 | 230 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
3/16" Dia. | |||||||||||||
| 0.126"-0.25" | 0.45" | 0.192"-0.196" | No. 11 | 0.625" | 0.092" | 260 | 320 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
| 0.251"-0.375" | 0.575" | 0.192"-0.196" | No. 11 | 0.625" | 0.092" | 260 | 320 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
| 0.376"-0.5" | 0.7" | 0.192"-0.196" | No. 11 | 0.625" | 0.092" | 260 | 320 | 5052 Aluminum | IFI 114 Standards | White | 100 | 000000000 | 00000 |
1/4" Dia. | |||||||||||||
| 0.126"-0.25" | 0.5" | 0.257"-0.261" | F | 0.75" | 0.107" | 460 | 560 | 5052 Aluminum | IFI 114 Standards | White | 25 | 000000000 | 00000 |
| 0.251"-0.375" | 0.625" | 0.257"-0.261" | F | 0.75" | 0.107" | 460 | 560 | 5052 Aluminum | IFI 114 Standards | White | 25 | 000000000 | 00000 |
Adhesive-Back Fabric Snaps
Peel off the backing and stick these male snap halves to flat or curved surfaces. Pair them with standard female snap halves (sold separately) to make a complete snap.
For technical drawings and 3-D models, click on a part number.
White Plastic | |||||
|---|---|---|---|---|---|
| Snap Dia. | Base Dia. | Temperature Range, °F | Pkg. Qty. | Pkg. | |
| 9/16" | 3/4" | -30° to 230° | 8 | 000000000 | 000000 |
Plastic Drive Anchors for Concrete
Also known as tap-in or uni-tap rivets, these anchors are barbed to resist pull out. Made from nylon, they're chemical resistant. The anchor compresses when driven in, expanding inside the hole for a secure hold in concrete. Install in a hole that is slightly longer than the anchor. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Head | Strength, lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drill Bit Size | Min. Installation Dp. | Color | Temperature Range, °F | Pull-Out | Shear | Tested In | For Use In | Pkg. Qty. | Pkg. | |
Nylon Plastic | |||||||||||||
9/32" Dia. | |||||||||||||
| 1" | 5/8" | 1/8" | 1/4" | 1" | White | -20° to 160° | 35 | 55 | 4,000 psi Concrete | Block, Concrete | 100 | 000000000 | 000000 |
| 1 5/8" | 5/8" | 1/8" | 1/4" | 1" | White | -20° to 160° | 35 | 55 | 4,000 psi Concrete | Block, Concrete | 50 | 000000000 | 00000 |
| 2 1/8" | 5/8" | 1/8" | 1/4" | 1" | White | -20° to 160° | 35 | 55 | 4,000 psi Concrete | Block, Concrete | 50 | 000000000 | 00000 |
| 2 5/8" | 5/8" | 1/8" | 1/4" | 1" | White | -20° to 160° | 35 | 55 | 4,000 psi Concrete | Block, Concrete | 25 | 000000000 | 00000 |
| 3 1/8" | 5/8" | 1/8" | 1/4" | 1" | White | -20° to 160° | 35 | 55 | 4,000 psi Concrete | Block, Concrete | 25 | 000000000 | 00000 |