Kits include a hammer and round rivet setters. Also known as zip guns, use these air hammers and a rivet setting bit with a bucking bar (sold separately) to install solid rivets. Choose a rivet setter that matches the rivet's head style. As the tool strikes the rivet head, the back side of the rivet is hammered against the bucking bar, deforming the body and fastening your material. The tool can also be used as a chiseling air hammer when paired with chiseling bits. Stroke length determines the hammering power. The longer the stroke, the greater the power.

Style A also includes an air regulator.

Kit includes a tool and domed and flush-mount rivets for 0.063"-0.125" and 0.188"-0.25" material thickness ranges. The tool has changeable nosepieces—use the nosepiece that matches your rivet's diameter. To install a rivet, insert the mandrel into the nosepiece of the tool. Place the rivet in the material and squeeze the handles. The tool pulls the mandrel through the rivet's body, creating a secure hold on both sides of the material, and breaks off the excess mandrel.

With no air hose to limit mobility, this tool installs rivets anywhere. It has changeable nosepieces—use the nosepiece that matches your rivet's diameter. The higher the pull capacity, the larger the rivet diameter the tool can install.

To install a rivet, insert the mandrel into the nosepiece of the tool. Place the rivet in the material and pull the trigger. The tool pulls the mandrel through the rivet's body, creating a secure hold on both sides of the material, and breaks off the excess mandrel.

This tool has changeable nosepieces, anvils, and pull-up studs for installing rivets and rivet nuts. A self-contained hydraulic system delivers additional force to make installation easier. Choose the attachment that matches your rivet's diameter or nut thread size. To install a rivet, insert the mandrel into the nosepiece of the tool. Place the rivet in the material and squeeze the handles. The tool pulls the mandrel through the rivet's body, creating a secure hold on both sides of the material, and breaks off the excess mandrel.

Pull-up studs and driving anvils for 6-32 to 3/8"-16 and M3 to M10 rivet nuts are sold separately.

For technical drawings and 3-D models, click on a part number.

Also known as pop and open-end rivets, use these to join materials together when you only have access to one side. Install with a blind rivet tool.

For technical drawings and 3-D models, click on a part number.

Everything you need to add threads to sheet metal, these assortments contain twist-resistant rivet nuts, mandrels, nosepieces, and a plier-style installation tool. The nuts have a ribbed body that grips surrounding material to hold them in place, keeping them from spinning as you tighten screws. They create reusable threads in surfaces that are too thin to be tapped. Also known as blind inserts, installation requires access to just one side of your material. The flange distributes the load and holds the nuts against the surface. All are steel with a zinc yellow-chromate plating to resist corrosion in wet environments.

To install, thread a rivet nut onto the mandrel, insert the nut into a drilled or punched round hole, and squeeze the handles to secure the nut.

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool. To install, thread the rivet nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.

Aluminum rivet nuts are one-third the weight of steel rivet nuts and resist corrosion in wet environments.

Zinc-plated steel rivet nuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

Use these rivet nuts for light duty fastening in low-clearance applications. Assortments include rivet nuts, mandrels, and an installation tool. Rivet nuts have a cadmium plating that provides corrosion resistance and adds lubricity so they collapse smoothly. The threaded portion is drawn into the sleeve when installed, creating pressure against the hole to secure the nut.