Threaded Ring Gauges with Calibration Certificate
Not only were these gauges calibrated in a lab, but they also come with a certificate that's traceable to NIST. The certificate, sometimes called a test report and long form certificate, details the tested measurements. They’re for checking a part’s external threads to ensure they fall within tolerance.
A part is within tolerance if it’s easy to thread a go gauge onto the part but difficult to thread a no-go gauge more than two turns. Inspect faster by holding more than one ring gauge with a threaded ring gauge holder.
Go gauges check the maximum external thread size.
No-go gauges check the minimum external thread size.
Threads have different classes of fit. Thread fit designates the tightness or looseness of the mating threads. For example, inch threads with a 3A fit have tighter tolerances than threads with a 2A fit.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Type | Thread Direction | Hardness | Material | Pitch Dia. Tolerance | Each | |
Go Gauge | |||||||
|---|---|---|---|---|---|---|---|
For Thread Fit Class 2A | |||||||
| 4-48 | UNF | Right Hand | Rockwell C60 | Tool Steel | -0.0002" to 0" | 00000000 | 0000000 |
For Thread Fit Class 3A | |||||||
| 4-48 | UNF | Right Hand | Rockwell C60 | Tool Steel | -0.0002" to 0" | 00000000 | 000000 |
No-Go Gauge | |||||||
For Thread Fit Class 2A | |||||||
| 4-48 | UNF | Right Hand | Rockwell C60 | Tool Steel | 0" to 0.0002" | 00000000 | 000000 |
For Thread Fit Class 3A | |||||||
| 4-48 | UNF | Right Hand | Rockwell C60 | Tool Steel | 0" to 0.0002" | 00000000 | 000000 |
Threaded Ring Gauges
Check a part’s external threads to make sure they fall within tolerance. You can use these for bolts, threaded rods, bits, and more. All gauges come with a manufacturer’s certificate of accuracy, also known as a certificate of compliance or a short form certification, that verifies the thread sizes are within tolerance.
The part is within tolerance if it’s easy to thread a go gauge onto, but difficult to thread a no-go gauge more than two turns. Use a threaded ring gauge holder to keep two gauges on hand at once for faster inspection.
Go gauges check the maximum external thread size.
No-go gauges check the minimum external thread size.
Threads have different classes of fit. Thread fit designates the tightness or looseness of the mating threads. For example, inch threads with a 3A fit have tighter tolerances than threads with a 2A fit.
For technical drawings and 3-D models, click on a part number.