We will reply to your message within an hour.
Also known as cantilever racks.
Store bars, spools, and other items on a single versatile rack.
Easily assemble and reconfigure as your needs change.
Use individual components to create your own personalized storage solution. These racks are also known as cantilever racks.
These cantilever racks are made to be used with forklifts and cranes.
With multiple heights, widths, and arm styles to choose from, create a rack that fits your needs. These racks are also known as cantilever racks.
Racks can be used individually or stacked up to nine high.
Pull out the bin boxes for easy access to contents.
Roll these bins near benches or other work areas, and turn each storage level to access the items you need.
Store multiple tools and parts in these bins, which spin so you can easily access the item you need.
Bins slope slightly and have a lip to keep contents in place.
Dividers snap in and out, allowing you to adjust the width of the compartments.
Create storage that fits your space with these stackable bin shelves.
Add a base to your bin shelving to elevate parts to a comfortable picking height and make it easier to clean under it.
Shaft collars secure the spools on the spindles.
Transport all your spools at the same time or use as a hand truck when spools are removed.
These smooth, solid shelves are corrosion resistant and easy to clean.
These corrosion-resistant shelves hold twice the weight of other wall-mount shelving.
The posts have grooves that allow shelves to adjust on 1" centers.
These shelves are corrosion resistant and vented to prevent dust buildup.
These standards mount to a hanging bracket or track, making them easier to install than other standards.
A plastic-laminate finish protects these shelves from stains and scratches.
These shelves fold up to create a temporary work surface, then fold back down for extra space when they’re not in use.
These shelves are durable and easy to clean.
These standards and shelf brackets are more stable and hold heavier loads than single-slotted standards and brackets.
These shelf brackets have a 500-lb. capacity—twice the capacity of our other shelf brackets.
These brackets allow you to lower your shelf 10 or 20 degrees.
Design a complete shelving unit with these standards, shelf brackets, and metal shelves. All components are corrosion resistant and are often used for quality control, laboratory, and food service applications.
These brackets have greater weight capacities than standard duty fold-away shelf brackets.
This shelving won't rust, dent, peel, or chip.
Also known as bulk racks, these units hold oversized equipment and raw material.
These one-piece units have an all-welded steel construction to support heavy tools and materials.
The sloped shelves on these shelving units allow parts to flow forward, providing access and visibility.
Also known as bulk racks, these units offer more storage space per level for large items and boxes.
Only 14" wide, this shelving easily fits into tight spaces.
The shelves on these units pull out to access heavy dies, machinery, and tools. They slide on roller bearings so you can retrieve contents horizontally with a forklift and vertically with a hoist, crane, or monorail system.
This shelving is corrosion resistant and is often used in laboratories and food service applications.
Don't fumble with nuts, bolts, or shelf clips—shelves have rivets that tap into keyhole slots on the posts with a rubber mallet.
This shelving quickly snaps together with no tools or hardware needed, yet is strong enough to handle your heavy parts and equipment.
Our strongest and most durable shelving, these units have shelf capacities 25% higher than any other shelving.
Faster to assemble than other heavy duty shelving, these units require no hardware.The uprights come assembled, and the shelves slide into place.
Shelves are reversible, allowing you to use them as a flush surface or with a lip to prevent items from falling off.
Pop the posts into the holes and these shelves are ready to load—no tools required.
This shelving has three times the shelf capacity of our Heavy Duty Wide and Deep Wire Shelving.
The three-sided design stabilizes packages and other contents when moving.
Often used in food service areas and laboratories, these shelving units have removable, dishwasher-safe panels that are treated to prevent degradation caused by the growth of stain- and odor-causing bacteria.
These steel shelves are epoxy-coated, making them chemical and corrosion resistant.
This shelving is reinforced to hold nearly twice as much weight as other wire shelving, and is chrome plated to resist corrosion. Shelf panels are removable for easy cleaning.
With forklift access on four sides, you can move these racks as easily as you move your pallets. Stack racks up to five units high, and easily reconfigure as your needs change. Racks should only be moved one unit at a time.
Select from a variety of uprights and beams to build your own personalized rack.
Store heavy, bulky loads on these racks that are designed to withstand frequent use of power-lifting equipment.
Choose from uprights up to 16 feet high and beams up to 144” wide to create a pallet rack to fit your needs.
With up to 9,600 lbs. capacity per storage level, these are the strongest pallet racks we offer.
Compatible with pallet racks with stepped beams.
Use with box- and channel-style pallet rack beams.
Also known as dunnage racks, these keep bulky items stored off the floor.
To create a rack, order a base and the number of dividers you need.
This welded, one-piece strut channel combines two strut channels back-to-back.
This welded, one-piece strut channel combines two strut channels side-to-side.
Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.
Create continuous runs of channel without corners.
Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.
Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.
For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.
Slide the strut channel into the tube for telescoping length adjustments.
Provide a stable, nonmarring base for strut channel legs.
Securely fasten strut channel to the floor.
Mount strut channel away from walls.
Support and protect conduit by mounting it to strut channel.
Support the corners of strut channel structures.
A tab on the end of these shelf brackets fits inside the strut channel for extra stability.
A flat or half-round shape keeps water from pooling on these strut rails. Unlike a traditional C-shape strut, these rails prevent the buildup of bacteria and debris, making them ideal for use in sanitary or food production environments.
Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.
Create strong structures by welding this framing together. Add metal panels to close off openings.
Create posts of varying lengths.
Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.
To provide corrosion resistance in wet environments, this framing is galvanized.
In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.
Half the weight of steel, this aluminum framing resists corrosion in wet environments.
No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.
Flush connections between rails and fittings give structures a clean finished look. Use this framing for stair rails, work platforms, and workstations.
Create lightweight adjustable structures. With telescoping aluminum rails, this framing is often used to make folding stands, extension poles, and sign frames.
Thick construction makes this framing strong and sturdy.
Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.
With shelves on one side and a pegboard on the other, these carts keep tools easily accessible.
Store, organize, and transport spools of wire and small tools around your jobsite.
The shelves are split into identical sides so you can efficiently organize two operations on one cart.
High mesh panels on three sides and an open top allow you to stack tall items while maintaining good visibility and quick access.
Slide out the tote boxes to access stored materials.
Load these trucks from either side to make quick work of moving large quantities of long, flat material such as doors, partitions, and sheet stock.
These easy-to-clean, corrosion-resistant plastic trucks are reinforced with steel for strength. Removable rails allow you to configure them to accommodate a variety of long, flat loads.
Made of steel for durability, these trucks have removable rails that allow you to configure them to accommodate a variety of long, flat loads.
Weld these caps and targets to the ends of posts to create stackable shelving and racking systems.
The ribbed wall design allows the bins to stack or nest.
A tab on the back of the bin box allows it to be tilted from the shelf without falling.
A lip on the back allows bin boxes to hang from rails or louvered panels.
Position these holders straight on or at an angle to assist reading from above or below.
Snap these holders onto Eagle, Intermetro, and Nexel wire shelving.
Easily replace casters on InterMetro carts and shelving—friction holds them in place in the 1" OD posts.