Filter by
DFARS Compliance
Heavy Duty Spiral External Retaining Rings
Thicker than standard spiral rings, these rings withstand greater forces. Wind them into place with two turns and they make 360° contact with the bore, so they’re best for high thrust loads. No tools required. Ring ID is measured with the ring uninstalled.
1060-1090 spring steel rings are an economical choice with good strength.
18-8 stainless steel rings have good corrosion resistance.
DIN 471 rings meet an international standard for retaining ring groove specifications.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
For technical drawings and 3-D models, click on a part number.
Inch
For Groove | Ring | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For OD | Dia. | Wd. | ID | Thick. | Thrust Load Capacity, lbs. | Magnetic Properties | Pkg. Qty. | Pkg. | |
1060-1090 Spring Steel | |||||||||
| 1/4" | 0.23" | 0.029" | 0.228" | 0.025" | 960 | Magnetic | 25 | 000000000 | 000000 |
| 5/16" | 0.29" | 0.029" | 0.287" | 0.025" | 1,200 | Magnetic | 25 | 000000000 | 00000 |
| 3/8" | 0.352" | 0.029" | 0.349" | 0.025" | 1,440 | Magnetic | 25 | 000000000 | 00000 |
| 7/16" | 0.412" | 0.029" | 0.409" | 0.025" | 1,680 | Magnetic | 25 | 000000000 | 00000 |
| 15/32" | 0.443" | 0.029" | 0.439" | 0.025" | 1,880 | Magnetic | 10 | 000000000 | 0000 |
| 1/2" | 0.468" | 0.039" | 0.464" | 0.035" | 2,530 | Magnetic | 10 | 000000000 | 0000 |
| 9/16" | 0.53" | 0.039" | 0.525" | 0.035" | 2,840 | Magnetic | 10 | 000000000 | 0000 |
| 19/32" | 0.559" | 0.039" | 0.554" | 0.035" | 3,000 | Magnetic | 10 | 000000000 | 0000 |
| 5/8" | 0.588" | 0.039" | 0.583" | 0.035" | 3,160 | Magnetic | 10 | 000000000 | 0000 |
| 11/16" | 0.646" | 0.046" | 0.641" | 0.042" | 4,180 | Magnetic | 5 | 000000000 | 0000 |
| 3/4" | 0.704" | 0.046" | 0.698" | 0.042" | 4,550 | Magnetic | 5 | 000000000 | 0000 |
| 25/32" | 0.733" | 0.046" | 0.727" | 0.042" | 4,740 | Magnetic | 5 | 000000000 | 0000 |
| 13/16" | 0.762" | 0.046" | 0.756" | 0.042" | 4,930 | Magnetic | 5 | 000000000 | 0000 |
| 7/8" | 0.821" | 0.046" | 0.814" | 0.042" | 5,310 | Magnetic | 5 | 000000000 | 0000 |
| 15/16" | 0.882" | 0.046" | 0.875" | 0.042" | 5,690 | Magnetic | 5 | 000000000 | 00000 |
| 1" | 0.94" | 0.046" | 0.932" | 0.042" | 6,070 | Magnetic | 5 | 000000000 | 0000 |
| 1 1/16" | 0.998" | 0.056" | 0.986" | 0.05" | 7,010 | Magnetic | 5 | 000000000 | 00000 |
| 1 1/8" | 1.059" | 0.056" | 1.047" | 0.05" | 7,420 | Magnetic | 5 | 000000000 | 0000 |
| 1 3/16" | 1.118" | 0.056" | 1.105" | 0.05" | 7,840 | Magnetic | 5 | 000000000 | 00000 |
| 1 1/4" | 1.176" | 0.056" | 1.163" | 0.05" | 8,250 | Magnetic | 5 | 000000000 | 0000 |
| 1 5/16" | 1.232" | 0.056" | 1.218" | 0.05" | 8,660 | Magnetic | 5 | 000000000 | 00000 |
| 1 3/8" | 1.291" | 0.056" | 1.277" | 0.05" | 9,070 | Magnetic | 5 | 000000000 | 0000 |
| 1 7/16" | 1.35" | 0.056" | 1.336" | 0.05" | 9,490 | Magnetic | 5 | 000000000 | 00000 |
| 1 1/2" | 1.406" | 0.056" | 1.39" | 0.05" | 9,900 | Magnetic | 5 | 000000000 | 0000 |
| 1 9/16" | 1.468" | 0.068" | 1.453" | 0.062" | 12,700 | Magnetic | 5 | 000000000 | 00000 |
| 1 5/8" | 1.529" | 0.068" | 1.513" | 0.062" | 13,200 | Magnetic | 5 | 000000000 | 0000 |
| 1 11/16" | 1.589" | 0.068" | 1.573" | 0.062" | 13,800 | Magnetic | 5 | 000000000 | 00000 |
| 1 3/4" | 1.65" | 0.068" | 1.633" | 0.062" | 14,300 | Magnetic | 5 | 000000000 | 0000 |
| 1 13/16" | 1.708" | 0.068" | 1.69" | 0.062" | 14,800 | Magnetic | 5 | 000000000 | 00000 |
| 1 7/8" | 1.769" | 0.068" | 1.751" | 0.062" | 15,300 | Magnetic | 5 | 000000000 | 0000 |
| 2" | 1.886" | 0.068" | 1.867" | 0.062" | 16,300 | Magnetic | 5 | 000000000 | 0000 |
| 2 1/8" | 2.003" | 0.086" | 1.989" | 0.078" | 21,800 | Magnetic | 5 | 000000000 | 0000 |
| 2 1/4" | 2.12" | 0.086" | 2.105" | 0.078" | 23,100 | Magnetic | 5 | 000000000 | 00000 |
| 2 3/8" | 2.239" | 0.086" | 2.223" | 0.078" | 24,400 | Magnetic | 5 | 000000000 | 00000 |
| 2 1/2" | 2.36" | 0.086" | 2.343" | 0.078" | 25,700 | Magnetic | 5 | 000000000 | 00000 |
| 2 5/8" | 2.481" | 0.086" | 2.464" | 0.078" | 27,000 | Magnetic | 5 | 000000000 | 00000 |
| 2 3/4" | 2.602" | 0.103" | 2.584" | 0.093" | 32,100 | Magnetic | 1 | 000000000 | 0000 |
| 2 7/8" | 2.721" | 0.103" | 2.702" | 0.093" | 33,600 | Magnetic | 1 | 000000000 | 0000 |
| 3" | 2.838" | 0.103" | 2.818" | 0.093" | 35,000 | Magnetic | 1 | 000000000 | 0000 |
| 3 1/4" | 3.076" | 0.103" | 3.054" | 0.093" | 37,900 | Magnetic | 1 | 000000000 | 0000 |
| 3 1/2" | 3.316" | 0.12" | 3.293" | 0.111" | 48,800 | Magnetic | 1 | 000000000 | 00000 |
| 3 3/4" | 3.552" | 0.12" | 3.527" | 0.111" | 52,300 | Magnetic | 1 | 000000000 | 00000 |
| 4" | 3.792" | 0.12" | 3.765" | 0.111" | 55,800 | Magnetic | 1 | 000000000 | 00000 |
| 4 1/2" | 4.31" | 0.12" | 4.28" | 0.111" | 62,700 | Magnetic | 1 | 000000000 | 00000 |
| 5" | 4.79" | 0.12" | 4.756" | 0.111" | 69,700 | Magnetic | 1 | 000000000 | 00000 |
18-8 Stainless Steel  | |||||||||
| 1/4" | 0.23" | 0.029" | 0.228" | 0.025" | 960 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 5/16" | 0.29" | 0.029" | 0.287" | 0.025" | 1,200 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 3/8" | 0.352" | 0.029" | 0.349" | 0.025" | 1,440 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 7/16" | 0.412" | 0.029" | 0.409" | 0.025" | 1,680 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 15/32" | 0.443" | 0.029" | 0.439" | 0.025" | 1,880 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 1/2" | 0.468" | 0.039" | 0.464" | 0.035" | 2,530 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 9/16" | 0.53" | 0.039" | 0.525" | 0.035" | 2,840 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 19/32" | 0.559" | 0.039" | 0.554" | 0.035" | 3,000 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 5/8" | 0.588" | 0.039" | 0.583" | 0.035" | 3,160 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 11/16" | 0.646" | 0.046" | 0.641" | 0.042" | 4,180 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 3/4" | 0.704" | 0.046" | 0.698" | 0.042" | 4,550 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 25/32" | 0.733" | 0.046" | 0.727" | 0.042" | 4,740 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| 13/16" | 0.762" | 0.046" | 0.756" | 0.042" | 4,930 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| 7/8" | 0.821" | 0.046" | 0.814" | 0.042" | 5,310 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 15/16" | 0.882" | 0.046" | 0.875" | 0.042" | 5,690 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| 1" | 0.94" | 0.046" | 0.932" | 0.042" | 6,070 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| 1 1/16" | 0.998" | 0.056" | 0.986" | 0.05" | 7,010 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 1/8" | 1.059" | 0.056" | 1.047" | 0.05" | 7,420 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 3/16" | 1.118" | 0.056" | 1.105" | 0.05" | 7,840 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 1/4" | 1.176" | 0.056" | 1.163" | 0.05" | 8,250 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 5/16" | 1.232" | 0.056" | 1.218" | 0.05" | 8,660 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 3/8" | 1.291" | 0.056" | 1.277" | 0.05" | 9,070 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 7/16" | 1.35" | 0.056" | 1.336" | 0.05" | 9,490 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 1/2" | 1.406" | 0.056" | 1.39" | 0.05" | 9,900 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 9/16" | 1.468" | 0.068" | 1.453" | 0.062" | 12,700 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 5/8" | 1.529" | 0.068" | 1.513" | 0.062" | 13,200 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 11/16" | 1.589" | 0.068" | 1.573" | 0.062" | 13,800 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 3/4" | 1.65" | 0.068" | 1.633" | 0.062" | 14,300 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 13/16" | 1.708" | 0.068" | 1.69" | 0.062" | 14,800 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 7/8" | 1.769" | 0.068" | 1.751" | 0.062" | 15,300 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2" | 1.886" | 0.068" | 1.867" | 0.062" | 16,300 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 1/8" | 2.003" | 0.086" | 1.989" | 0.078" | 21,800 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 1/4" | 2.12" | 0.086" | 2.105" | 0.078" | 23,100 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 3/8" | 2.239" | 0.086" | 2.223" | 0.078" | 24,400 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
| 2 1/2" | 2.36" | 0.086" | 2.343" | 0.078" | 25,700 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
| 2 5/8" | 2.481" | 0.086" | 2.464" | 0.078" | 27,000 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
| 2 3/4" | 2.602" | 0.103" | 2.584" | 0.093" | 32,100 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
| 2 7/8" | 2.721" | 0.103" | 2.702" | 0.093" | 33,600 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
| 3" | 2.838" | 0.103" | 2.818" | 0.093" | 35,000 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
| 3 1/4" | 3.076" | 0.103" | 3.054" | 0.093" | 37,900 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
| 3 1/2" | 3.316" | 0.12" | 3.293" | 0.111" | 48,800 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
| 3 3/4" | 3.552" | 0.12" | 3.527" | 0.111" | 52,300 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
| 4" | 3.792" | 0.12" | 3.765" | 0.111" | 55,800 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
| 4 1/2" | 4.31" | 0.12" | 4.28" | 0.111" | 62,700 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
| 5" | 4.79" | 0.12" | 4.756" | 0.111" | 69,700 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
Metric
For Groove | Ring | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For OD, mm | Dia., mm | Wd., mm | ID, mm | Thick., mm | Thrust Load Capacity, lbs. | Magnetic Properties | Specifications Met | Pkg. Qty. | Pkg. | |
1060-1090 Spring Steel | ||||||||||
| 13 | 12.4 | 1.1 | 12.27 | 0.99 | 3,020 | Magnetic | DIN 471 | 10 | 000000000 | 000000 |
| 14 | 13.4 | 1.1 | 13.26 | 0.99 | 3,260 | Magnetic | DIN 471 | 10 | 000000000 | 00000 |
| 15 | 14.3 | 1.1 | 14.15 | 0.99 | 3,490 | Magnetic | DIN 471 | 10 | 000000000 | 00000 |
| 16 | 15.2 | 1.1 | 15.04 | 0.99 | 3,720 | Magnetic | DIN 471 | 10 | 000000000 | 00000 |
| 17 | 16.2 | 1.1 | 16.04 | 0.99 | 3,960 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 18 | 17 | 1.3 | 16.83 | 1.14 | 4,190 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 19 | 18 | 1.3 | 17.83 | 1.14 | 4,420 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 20 | 19 | 1.3 | 18.82 | 1.14 | 4,660 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 22 | 21 | 1.3 | 20.78 | 1.14 | 5,120 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 24 | 22.9 | 1.3 | 22.66 | 1.14 | 5,590 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 25 | 23.9 | 1.3 | 23.65 | 1.14 | 5,820 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 26 | 24.9 | 1.3 | 24.64 | 1.14 | 6,060 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 28 | 26.6 | 1.6 | 26.34 | 1.44 | 8,240 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 30 | 28.6 | 1.6 | 28.32 | 1.44 | 8,830 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 32 | 30.3 | 1.6 | 30 | 1.44 | 9,420 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 34 | 32.3 | 1.6 | 31.98 | 1.44 | 10,000 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 35 | 33 | 1.6 | 32.66 | 1.44 | 10,300 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 36 | 34 | 1.85 | 33.65 | 1.69 | 12,400 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 40 | 37.5 | 1.85 | 37.11 | 1.69 | 13,800 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 45 | 42.5 | 1.85 | 42.06 | 1.69 | 15,500 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 50 | 47 | 2.15 | 46.53 | 1.93 | 19,700 | Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 55 | 52 | 2.15 | 51.49 | 1.93 | 21,700 | Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 60 | 57 | 2.15 | 56.42 | 1.93 | 23,600 | Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 65 | 62 | 2.65 | 61.39 | 2.41 | 30,500 | Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 70 | 67 | 2.65 | 66.34 | 2.41 | 32,800 | Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 75 | 72 | 2.65 | 71.33 | 2.41 | 35,200 | Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 80 | 76.5 | 2.65 | 75.81 | 2.41 | 37,500 | Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 85 | 81.5 | 3.15 | 80.8 | 2.91 | 48,100 | Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 90 | 86.5 | 3.15 | 85.8 | 2.91 | 51,000 | Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 95 | 91.5 | 3.15 | 90.8 | 2.91 | 53,800 | Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 100 | 96.5 | 3.15 | 95.79 | 2.91 | 56,600 | Magnetic | DIN 471 | 1 | 000000000 | 00000 |
18-8 Stainless Steel | ||||||||||
| 13 | 12.4 | 1.1 | 12.27 | 0.99 | 3,020 | May Be Mildly Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 14 | 13.4 | 1.1 | 13.26 | 0.99 | 3,260 | May Be Mildly Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 15 | 14.3 | 1.1 | 14.15 | 0.99 | 3,490 | May Be Mildly Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 16 | 15.2 | 1.1 | 15.04 | 0.99 | 3,720 | May Be Mildly Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 17 | 16.2 | 1.1 | 16.04 | 0.99 | 3,960 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 18 | 17 | 1.3 | 16.83 | 1.14 | 4,190 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 19 | 18 | 1.3 | 17.83 | 1.14 | 4,420 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 20 | 19 | 1.3 | 18.82 | 1.14 | 4,660 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 22 | 21 | 1.3 | 20.78 | 1.14 | 5,120 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 24 | 22.9 | 1.3 | 22.66 | 1.14 | 5,590 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 25 | 23.9 | 1.3 | 23.65 | 1.14 | 5,820 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 26 | 24.9 | 1.3 | 24.64 | 1.14 | 6,060 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 28 | 26.6 | 1.6 | 26.34 | 1.44 | 8,240 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 30 | 28.6 | 1.6 | 28.32 | 1.44 | 8,830 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 32 | 30.3 | 1.6 | 30 | 1.44 | 9,420 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 34 | 32.3 | 1.6 | 31.98 | 1.44 | 10,000 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 35 | 33 | 1.6 | 32.66 | 1.44 | 10,300 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 36 | 34 | 1.85 | 33.65 | 1.69 | 12,400 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 38 | 36 | 1.85 | 35.64 | 1.69 | 13,100 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 40 | 37.5 | 1.85 | 37.11 | 1.69 | 13,800 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 45 | 42.5 | 1.85 | 42.06 | 1.69 | 15,500 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 50 | 47 | 2.15 | 46.53 | 1.93 | 19,700 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 55 | 52 | 2.15 | 51.49 | 1.93 | 21,700 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 60 | 57 | 2.15 | 56.42 | 1.93 | 23,600 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 65 | 62 | 2.65 | 61.39 | 2.41 | 30,500 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 70 | 67 | 2.65 | 66.34 | 2.41 | 32,800 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 75 | 72 | 2.65 | 71.33 | 2.41 | 35,200 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 80 | 76.5 | 2.65 | 75.81 | 2.41 | 37,500 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 85 | 81.5 | 3.15 | 80.8 | 2.91 | 48,100 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 90 | 86.5 | 3.15 | 85.8 | 2.91 | 51,000 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 95 | 91.5 | 3.15 | 90.8 | 2.91 | 53,800 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 100 | 96.5 | 3.15 | 95.79 | 2.91 | 56,600 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
Spiral External Retaining Rings
These coiled rings can be wound into place without tools. They make 360° contact with the shaft so there is no gap. Ring ID is measured with the ring uninstalled.
1060-1090 spring steel rings are an economical choice with good strength.
18-8 stainless steel rings have good corrosion resistance.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
For technical drawings and 3-D models, click on a part number.
Inch
For Groove | Ring | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For OD | Dia. | Wd. | ID | Thick. | Thrust Load Capacity, lbs. | Magnetic Properties | Pkg. Qty. | Pkg. | |
1060-1090 Spring Steel | |||||||||
| 1/2" | 0.474" | 0.03" | 0.467" | 0.025" | 2,000 | Magnetic | 10 | 000000000 | 00000 |
| 5/8" | 0.594" | 0.03" | 0.585" | 0.025" | 2,500 | Magnetic | 10 | 000000000 | 0000 |
| 3/4" | 0.719" | 0.036" | 0.71" | 0.031" | 3,360 | Magnetic | 5 | 000000000 | 0000 |
| 7/8" | 0.838" | 0.036" | 0.828" | 0.031" | 3,920 | Magnetic | 5 | 000000000 | 0000 |
| 1" | 0.957" | 0.042" | 0.946" | 0.037" | 5,350 | Magnetic | 5 | 000000000 | 0000 |
| 1 1/8" | 1.083" | 0.042" | 1.07" | 0.037" | 6,020 | Magnetic | 5 | 000000000 | 0000 |
| 1 1/4" | 1.202" | 0.048" | 1.188" | 0.043" | 7,770 | Magnetic | 5 | 000000000 | 0000 |
| 1 3/8" | 1.323" | 0.048" | 1.308" | 0.043" | 8,540 | Magnetic | 5 | 000000000 | 0000 |
| 1 7/16" | 1.385" | 0.048" | 1.37" | 0.043" | 8,930 | Magnetic | 5 | 000000000 | 0000 |
| 1 1/2" | 1.448" | 0.048" | 1.433" | 0.043" | 9,320 | Magnetic | 5 | 000000000 | 0000 |
| 1 5/8" | 1.566" | 0.056" | 1.549" | 0.049" | 10,500 | Magnetic | 5 | 000000000 | 0000 |
| 1 3/4" | 1.691" | 0.056" | 1.673" | 0.049" | 11,300 | Magnetic | 5 | 000000000 | 0000 |
| 1 7/8" | 1.808" | 0.056" | 1.789" | 0.049" | 12,100 | Magnetic | 5 | 000000000 | 0000 |
| 2" | 1.929" | 0.056" | 1.909" | 0.049" | 12,900 | Magnetic | 5 | 000000000 | 0000 |
| 2 1/4" | 2.176" | 0.056" | 2.153" | 0.049" | 14,500 | Magnetic | 5 | 000000000 | 0000 |
| 2 1/2" | 2.418" | 0.056" | 2.394" | 0.049" | 16,100 | Magnetic | 5 | 000000000 | 00000 |
| 2 3/4" | 2.66" | 0.056" | 2.635" | 0.049" | 17,700 | Magnetic | 1 | 000000000 | 0000 |
| 3" | 2.904" | 0.068" | 2.877" | 0.061" | 24,100 | Magnetic | 1 | 000000000 | 0000 |
18-8 Stainless Steel | |||||||||
| 1/2" | 0.474" | 0.03" | 0.467" | 0.025" | 2,000 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 5/8" | 0.594" | 0.03" | 0.585" | 0.025" | 2,500 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 3/4" | 0.719" | 0.036" | 0.71" | 0.031" | 3,360 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 7/8" | 0.838" | 0.036" | 0.828" | 0.031" | 3,920 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 1" | 0.957" | 0.042" | 0.946" | 0.037" | 5,350 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 1 1/8" | 1.083" | 0.042" | 1.07" | 0.037" | 6,020 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 1/4" | 1.202" | 0.048" | 1.188" | 0.043" | 7,770 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 3/8" | 1.323" | 0.048" | 1.308" | 0.043" | 8,540 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 7/16" | 1.385" | 0.048" | 1.37" | 0.043" | 8,930 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 1/2" | 1.448" | 0.048" | 1.433" | 0.043" | 9,320 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 5/8" | 1.566" | 0.056" | 1.549" | 0.049" | 10,500 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 3/4" | 1.691" | 0.056" | 1.673" | 0.049" | 11,300 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1 7/8" | 1.808" | 0.056" | 1.789" | 0.049" | 12,100 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2" | 1.929" | 0.056" | 1.909" | 0.049" | 12,900 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 1/4" | 2.176" | 0.056" | 2.153" | 0.049" | 14,500 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 1/2" | 2.418" | 0.056" | 2.394" | 0.049" | 16,100 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 3/4" | 2.66" | 0.056" | 2.635" | 0.049" | 17,700 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
| 3" | 2.904" | 0.068" | 2.877" | 0.061" | 24,100 | May Be Mildly Magnetic | 1 | 000000000 | 00000 |
Metric
For Groove | Ring | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For OD, mm | Dia., mm | Wd., mm | ID, mm | Thick., mm | Thrust Load Capacity, lbs. | Magnetic Properties | Pkg. Qty. | Pkg. | |
1060-1090 Spring Steel | |||||||||
| 12 | 11.34 | 0.75 | 11.17 | 0.64 | 1,900 | Magnetic | 10 | 000000000 | 000000 |
| 25 | 23.84 | 1.07 | 23.64 | 0.94 | 5,260 | Magnetic | 10 | 000000000 | 00000 |
| 26 | 24.84 | 1.07 | 24.61 | 0.94 | 5,470 | Magnetic | 10 | 000000000 | 00000 |
| 30 | 28.68 | 1.22 | 28.45 | 1.1 | 7,390 | Magnetic | 10 | 000000000 | 00000 |
| 32 | 30.68 | 1.22 | 30.43 | 1.1 | 7,890 | Magnetic | 10 | 000000000 | 00000 |
| 35 | 33.6 | 1.22 | 33.32 | 1.1 | 8,630 | Magnetic | 10 | 000000000 | 00000 |
| 40 | 38.48 | 1.42 | 38.18 | 1.25 | 10,200 | Magnetic | 5 | 000000000 | 00000 |
| 44 | 42.38 | 1.42 | 41.04 | 1.25 | 11,000 | Magnetic | 5 | 000000000 | 00000 |
| 45 | 43.28 | 1.42 | 42.06 | 1.25 | 11,200 | Magnetic | 5 | 000000000 | 00000 |
| 54 | 52 | 1.42 | 51.62 | 1.25 | 13,800 | Magnetic | 5 | 000000000 | 00000 |
| 60 | 57.86 | 1.42 | 57.43 | 1.25 | 15,300 | Magnetic | 5 | 000000000 | 00000 |
| 65 | 62.66 | 1.42 | 62.2 | 1.25 | 16,600 | Magnetic | 1 | 000000000 | 0000 |
| 70 | 67.56 | 1.42 | 67.08 | 1.25 | 17,900 | Magnetic | 5 | 000000000 | 00000 |
| 80 | 77.36 | 1.73 | 76.8 | 1.55 | 25,300 | Magnetic | 1 | 000000000 | 0000 |
| 82 | 79.3 | 1.73 | 78.72 | 1.55 | 26,000 | Magnetic | 1 | 000000000 | 0000 |
| 110 | 106.54 | 1.73 | 105.75 | 1.55 | 34,800 | Magnetic | 1 | 000000000 | 0000 |
| 140 | 136.08 | 2 | 135.14 | 1.83 | 52,400 | Magnetic | 1 | 000000000 | 00000 |
| 150 | 146 | 2 | 145 | 1.83 | 56,100 | Magnetic | 1 | 000000000 | 00000 |
18-8 Stainless Steel | |||||||||
| 12 | 11.34 | 0.75 | 11.17 | 0.64 | 1,900 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| 32 | 30.68 | 1.22 | 30.43 | 1.1 | 7,890 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 40 | 38.48 | 1.42 | 38.18 | 1.25 | 10,200 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
Single-Turn Spiral External Retaining Rings
Slide these rings into place with one twist—no tools required—for applications with high thrust loads. Ring ID is measured with the ring uninstalled.
1060-1090 spring steel rings are an economical choice with good strength.
18-8 stainless steel rings have good corrosion resistance.
DIN 471 rings meet international standards for groove specifications in retaining rings.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
For technical drawings and 3-D models, click on a part number.
Inch
For Groove | Ring | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For OD | Dia. | Wd. | ID | Thick. | Thrust Load Capacity, lbs. | Magnetic Properties | Pkg. Qty. | Pkg. | |
1060-1090 Spring Steel | |||||||||
| 1/4" | 0.238" | 0.015" | 0.236" | 0.012" | 480 | Magnetic | 25 | 000000000 | 000000 |
| 3/8" | 0.351" | 0.018" | 0.348" | 0.015" | 900 | Magnetic | 25 | 000000000 | 00000 |
| 1/2" | 0.472" | 0.022" | 0.467" | 0.018" | 1,300 | Magnetic | 25 | 000000000 | 00000 |
| 5/8" | 0.597" | 0.022" | 0.591" | 0.018" | 1,630 | Magnetic | 25 | 000000000 | 00000 |
| 3/4" | 0.722" | 0.022" | 0.715" | 0.018" | 1,950 | Magnetic | 10 | 000000000 | 0000 |
| 7/8" | 0.833" | 0.026" | 0.825" | 0.021" | 2,660 | Magnetic | 10 | 000000000 | 0000 |
| 1" | 0.958" | 0.026" | 0.949" | 0.021" | 3,040 | Magnetic | 10 | 000000000 | 0000 |
| 1 1/4" | 1.206" | 0.031" | 1.194" | 0.025" | 4,120 | Magnetic | 10 | 000000000 | 00000 |
| 1 1/2" | 1.456" | 0.031" | 1.442" | 0.025" | 4,950 | Magnetic | 10 | 000000000 | 00000 |
| 1 3/4" | 1.693" | 0.039" | 1.674" | 0.031" | 7,160 | Magnetic | 10 | 000000000 | 00000 |
| 2" | 1.943" | 0.039" | 1.922" | 0.031" | 8,180 | Magnetic | 10 | 000000000 | 00000 |
| 2 1/2" | 2.424" | 0.039" | 2.397" | 0.031" | 10,200 | Magnetic | 5 | 000000000 | 0000 |
| 3" | 2.924" | 0.039" | 2.892" | 0.031" | 12,200 | Magnetic | 5 | 000000000 | 0000 |
18-8 Stainless Steel | |||||||||
| 1/4" | 0.238" | 0.015" | 0.236" | 0.012" | 480 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 3/8" | 0.351" | 0.018" | 0.348" | 0.015" | 900 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 1/2" | 0.472" | 0.022" | 0.467" | 0.018" | 1,300 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 9/16" | 0.534" | 0.022" | 0.529" | 0.018" | 1,460 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 5/8" | 0.597" | 0.022" | 0.591" | 0.018" | 1,630 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 11/16" | 0.659" | 0.022" | 0.652" | 0.018" | 1,790 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 3/4" | 0.722" | 0.022" | 0.715" | 0.018" | 1,950 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 13/16" | 0.77" | 0.026" | 0.762" | 0.021" | 2,460 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 7/8" | 0.833" | 0.026" | 0.825" | 0.021" | 2,660 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 15/16" | 0.895" | 0.026" | 0.886" | 0.021" | 2,840 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 1" | 0.958" | 0.026" | 0.949" | 0.021" | 3,040 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 1 1/4" | 1.206" | 0.031" | 1.194" | 0.025" | 4,120 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 1 1/2" | 1.456" | 0.031" | 1.442" | 0.025" | 4,950 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 1 5/8" | 1.568" | 0.039" | 1.55" | 0.031" | 6,650 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| 1 3/4" | 1.693" | 0.039" | 1.674" | 0.031" | 7,160 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| 1 7/8" | 1.818" | 0.039" | 1.798" | 0.031" | 7,670 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2" | 1.943" | 0.039" | 1.922" | 0.031" | 8,180 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 1/8" | 2.049" | 0.039" | 2.026" | 0.031" | 8,690 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 1/4" | 2.174" | 0.039" | 2.149" | 0.031" | 9,200 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 3/8" | 2.299" | 0.039" | 2.273" | 0.031" | 9,720 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 1/2" | 2.424" | 0.039" | 2.397" | 0.031" | 10,200 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 5/8" | 2.549" | 0.039" | 2.521" | 0.031" | 10,700 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 3/4" | 2.674" | 0.039" | 2.644" | 0.031" | 11,200 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 2 7/8" | 2.799" | 0.039" | 2.768" | 0.031" | 11,700 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 3" | 2.924" | 0.039" | 2.892" | 0.031" | 12,200 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
Metric
For Groove | Ring | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For OD, mm | Dia., mm | Wd., mm | ID, mm | Thick., mm | Thrust Load Capacity, lbs. | Magnetic Properties | Specifications Met | Pkg. Qty. | Pkg. | |
1060-1090 Spring Steel | ||||||||||
| 15 | 14.3 | 1.1 | 14.15 | 0.94 | 2,740 | Magnetic | DIN 471 | 10 | 000000000 | 00000 |
| 16 | 15.2 | 1.1 | 14.98 | 0.94 | 2,920 | Magnetic | DIN 471 | 10 | 000000000 | 0000 |
| 17 | 16.2 | 1.1 | 16.06 | 0.94 | 3,110 | Magnetic | DIN 471 | 10 | 000000000 | 0000 |
| 18 | 17 | 1.3 | 16.82 | 1.15 | 4,030 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 19 | 18 | 1.3 | 17.81 | 1.15 | 4,250 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 20 | 19 | 1.3 | 18.8 | 1.15 | 4,470 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 22 | 21 | 1.3 | 20.83 | 1.15 | 4,930 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 24 | 22.9 | 1.3 | 22.5 | 1.15 | 5,370 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 25 | 23.9 | 1.3 | 23.7 | 1.15 | 5,600 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 28 | 26.6 | 1.6 | 26.32 | 1.44 | 7,450 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 30 | 28.6 | 1.6 | 28.35 | 1.44 | 7,990 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 32 | 30.3 | 1.6 | 29.87 | 1.44 | 8,520 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 35 | 33 | 1.6 | 32.57 | 1.44 | 9,320 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 38 | 36 | 1.85 | 35.62 | 1.69 | 11,800 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 40 | 37.5 | 1.85 | 37.02 | 1.69 | 12,500 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 45 | 42.5 | 1.85 | 42.05 | 1.69 | 14,000 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 50 | 47 | 2.15 | 46.5 | 1.93 | 16,900 | Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 55 | 52 | 2.15 | 51.45 | 1.93 | 18,600 | Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 60 | 57 | 2.15 | 56.55 | 1.93 | 20,300 | Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 75 | 72 | 2.65 | 71.25 | 2.41 | 30,200 | Magnetic | DIN 471 | 1 | 000000000 | 0000 |
18-8 Stainless Steel | ||||||||||
| 13 | 12.4 | 1.1 | 12.27 | 0.94 | 2,380 | May Be Mildly Magnetic | DIN 471 | 5 | 000000000 | 0000 |
| 14 | 13.4 | 1.1 | 13.31 | 0.94 | 2,560 | May Be Mildly Magnetic | DIN 471 | 5 | 000000000 | 0000 |
| 15 | 14.3 | 1.1 | 14.15 | 0.94 | 2,740 | May Be Mildly Magnetic | DIN 471 | 5 | 000000000 | 0000 |
| 16 | 15.2 | 1.1 | 14.98 | 0.94 | 2,920 | May Be Mildly Magnetic | DIN 471 | 5 | 000000000 | 0000 |
| 17 | 16.2 | 1.1 | 16.06 | 0.94 | 3,110 | May Be Mildly Magnetic | DIN 471 | 5 | 000000000 | 0000 |
| 19 | 18 | 1.3 | 17.81 | 1.15 | 4,250 | May Be Mildly Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 20 | 19 | 1.3 | 18.8 | 1.15 | 4,470 | May Be Mildly Magnetic | DIN 471 | 5 | 000000000 | 00000 |
| 22 | 21 | 1.3 | 20.83 | 1.15 | 4,930 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 24 | 22.9 | 1.3 | 22.5 | 1.15 | 5,370 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 25 | 23.9 | 1.3 | 23.7 | 1.15 | 5,600 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 26 | 24.9 | 1.3 | 24.64 | 1.15 | 5,820 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 28 | 26.6 | 1.6 | 26.32 | 1.44 | 7,450 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 30 | 28.6 | 1.6 | 28.35 | 1.44 | 7,990 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 32 | 30.3 | 1.6 | 29.87 | 1.44 | 8,520 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 34 | 32.3 | 1.6 | 31.96 | 1.44 | 9,060 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 35 | 33 | 1.6 | 32.57 | 1.44 | 9,320 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 36 | 34 | 1.85 | 33.64 | 1.69 | 11,200 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 38 | 36 | 1.85 | 35.62 | 1.69 | 11,800 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 40 | 37.5 | 1.85 | 37.02 | 1.69 | 12,500 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 45 | 42.5 | 1.85 | 42.05 | 1.69 | 14,000 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 50 | 47 | 2.15 | 46.5 | 1.93 | 16,900 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 55 | 52 | 2.15 | 51.45 | 1.93 | 18,600 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 0000 |
| 60 | 57 | 2.15 | 56.55 | 1.93 | 20,300 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 65 | 62 | 2.65 | 61.35 | 2.41 | 26,200 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 70 | 67 | 2.65 | 66.22 | 2.41 | 28,200 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 80 | 76.5 | 2.65 | 75.7 | 2.41 | 32,200 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 85 | 81.5 | 3.15 | 80.65 | 2.91 | 39,400 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 90 | 86.5 | 3.15 | 85.8 | 2.91 | 41,800 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 95 | 91.5 | 3.15 | 90.68 | 2.91 | 44,100 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
| 100 | 96.5 | 3.15 | 95.5 | 2.91 | 46,400 | May Be Mildly Magnetic | DIN 471 | 1 | 000000000 | 00000 |
External and Internal Spiral Retaining Ring Assortments
Wind these retaining rings into a groove—no tools required for installation. Rings make 360° of contact with the shaft, so there is no gap.
Oil-coated steel rings are corrosion resistant in dry environments.
18-8 stainless steel retaining rings are chemical resistant and may be mildly magnetic.
| Number of Pieces | Includes | Container Type | Each | |
Inch | ||||
|---|---|---|---|---|
Oil-Coated Steel | ||||
| 216 | 108 External Retaining Rings (For 1/2" to 1 1/2" OD) 108 Internal Retaining Rings (For 1/2" to 1 1/2" ID) | Plastic Box | 000000000 | 0000000 |
18-8 Stainless Steel | ||||
| 216 | 108 External Retaining Rings (For 1/2" to 1 1/2" OD) 108 Internal Retaining Rings (For 1/2" to 1 1/2" ID) | Plastic Box | 000000000 | 000000 |