Replace the cartridge and/or filter when breathing through these half-face respirators becomes difficult.

N95 respirators filter out 95% of solid particles. They are not oil resistant.

P100 respirators resist oil exposure for up to 40 hours and filter out 99.97% of solid particles.

Silicone rubber respirators are a good choice for comfort during periods of extended wear. TPE rubber respirators are an economical choice that are good for occasional use. Nitrile rubber respirators are durable and long-lasting, making them ideal for frequent use.

Style B respirators have a speech diaphragm that improves voice clarity, letting you communicate with coworkers without removing the mask or leaving the workspace.

Replacement cartridges for P100 nitrile rubber respirators come with a filter.

Full-face coverage shields eyes from liquid splashes and irritating vapors. Replace the cartridge and/or filter when breathing through these respirators becomes difficult.

N95 respirators filter out 95% of solid particles. They are not oil resistant.

P100 respirators resist oil exposure for up to 40 hours and filter out 99.97% of solid particles.

The portable pump on these respirators provides a continuous supply of clean air for one person.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

When connected to an air pump, respirators provide a continuous supply of clean air. They have a chemical-resistant Tychem 2000 (formerly known as Tyvek QC) hood that protects against light liquid splashes. Tuck the hood with outer bib and inner bib into your clothing for splash protection.

Pinlock suspension hats adjust with interlocking straps. Ratchet suspensions adjust with an easy-turn knob.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Good for use around abrasive blasters and paint sprayers, these respirators are made of high-density materials that protect against rough airborne particles. An air pump (sold separately) is required. The inner lens meets ANSI/ISEA standards for impact resistance. Respirators have a pinlock suspension that adjusts with interlocking straps.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Made of chemical-resistant Tychem 2000 (formerly known as Tyvek QC), these hood respirators have both an outer bib and an inner bib that tucks into your clothing for splash protection. They hook up to your plant's air lines—because you don’t need to draw air through a filter or cartridge, resistance and fatigue are minimized. Respirators have a ratchet suspension that adjusts with an easy-turn knob.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Use a cooling tube (sold separately) to cool incoming air by as much as 30° F.

Good for use around abrasive blasters and painters, these respirators are made of high-density materials that protect against rough airborne particles. The inner lens meets ANSI/ISEA standards for impact resistance.

Respirators have a pinlock suspension that adjusts with interlocking straps.

Add extra hose to span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Use a cooling tube (sold separately) to cool incoming air by as much as 30° F.

Divert compressed air from a single line to two respirators. Often used in plants with limited air sources, these manifolds allow two workers to share the same line. Shaped like a briefcase, they’re easy to tote around your facility—use them up to 300 ft. from an air source. The case is polypropylene, so it’s durable enough to hold up to wear and tear.