Designed for indoor applications, these cords are often used to power appliances.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

Use these cords with computers, lab equipment, and office machines that have IEC connections.

Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked.

Create secure, vibration-resistant connections on both ends—these cord splitters have a hospital-grade plug and locking sockets.

Tug these cords to full length, and they’ll stay plugged in. Also called hospital-grade cords, they form an extra-tight connection with outlets. After stretching, they return to a tight, tangle-free coil.

Create a secure, vibration-resistant connection on both ends—these cords have a hospital-grade plug and a locking connector on the socket.

These cords work with any Milwaukee tool with a pin socket (Quik-Lok) connection.

Plug these cords into computers, lab equipment, and office machines that have IEC connections.

To run DC-powered lab and medical equipment from your outlet, add a power cord with the plug style and length you need. These adapters meet strict IEC, UL, or ANSI/AAMI standards for use with medical devices.

Charge most standard laptops. These chargers come with five interchangeable tips to suit your device.

Plug these adapter cords into a standard outlet and they change AC voltage to DC voltage.

Transfer power between your door frame and door to power electric locks or exit devices.

Carry DC power in or out of electronic devices with these cords. All have industry standard barrel-style connections, letting you power electronics from power supplies.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Send DC power to multiple electronics from one source. With industry standard barrel-style connections, these splitters are compatible with many power supplies and other devices.

These cords have an M8 connector on one end and an M12 connector on the other.

Often used for automated systems, motors, and pumps in tough industrial areas such as near welding and metal machining, these cords carry higher current than M5, M8, and M12 cords.

FDA compliant for direct contact with food, these cords are safe to use with 12 mm proximity switches, valves, and power supplies in food, beverage, and pharmaceutical applications.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices.

A few turns is all it takes to join these cords, which have thick threads similar to a light bulb, for a secure connection in washdown and high-vibration areas. They detach just as fast for frequent maintenance.

Use these cords in vehicles and other agricultural and construction equipment.

Like a tree trunk connecting to branches, these cords supply power to a chain of devices. Send power to high-amperage motors, robotic arms, and other machines in motor controls, conveyors, and sorting and packaging systems.

Similar to branches extending from a tree, these cords disperse power from a main power line to run a chain of devices. Power high-amperage fans, pumps, and other machines in motor controls, conveyors, and sorting and packaging systems.

The insulation on these cords resists water, so they can be used outdoors.

Run power to welders in machine shops, garages, and other areas where these cords will be exposed to harsh conditions. These cords have either EPDM or PVC insulation that protects the cord's wires from weld slag and being dragged, kicked, and stepped on.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

A locking lever on the socket keeps multiple devices connected to these extension cords.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Avoid the clutter of multiple extension cords and overcrowded outlet strips—these extension cords have outlet boxes spread evenly along their length.

Put overhead outlets in arm’s reach.

These self-coiling cords return to their retracted length after stretching for tangle-free storage.

Keep power flowing in dirty areas with rubber-insulated cords that resist oil, water, and chemicals. A locking lever on the socket prevents your device from disconnecting.

A locking lever on the female socket prevents your device from disconnecting.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Keep personnel safe from electric shock with these cords.

Attach these splitters to an extension cord to power multiple devices from one cord.

Power computers, lab equipment, and office machines that have IEC connections.

Save energy by automatically turning off unused outlets—the master outlet controls the follower outlets and shuts off power to those outlets when a device plugged into the master is turned off.

Separately control each device plugged into these strips—each outlet has its own power switch.

A filter through the middle isolates two pairs of outlets, so high voltage equipment plugged into one pair won’t affect the other pair.

With a rubber housing, these outlet strips withstand drops and other impact.

These curved outlet strips clamp onto a pole or table leg.

No need for mounting hardware—these outlet strips have magnets on the back to stick to steel walls, cabinets, and other magnetic surfaces.

Bring power to workstations that are not near a wall—these poles mount from the ceiling.

Power devices above and below your workbench while keeping your outlet strip out of the way.

Stretch these cords out when you need extra length and their coiled design springs back when it’s not needed to make them smaller.

Pinch the sides on the plugs of these cords to insert them; they lock into a socket to prevent the cord from detaching.

Often used in robotics, packaging, conveyors, and other applications with constant movement and high temperatures, these silicone rubber cords bend and flex at temperatures up to 325° F.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

The insulation serves as a tough armor that protects these cords in high-traffic areas.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

Some of the smallest signal/power connectors we offer, these connectors fit in tight spaces and are often used in electronics.

Often used in devices that branch off of the main power line, these connectors power high-amperage fans, pumps, and machines in motor controls, conveyors, and sorting and packaging systems.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

Send signal and power to low-current devices with M8 connections in food processing and other sanitary applications.

Safely use these connectors with 12 mm proximity switches, console lights, valves, and power supplies in food, beverage, and pharmaceutical applications—they’re FDA compliant for direct food contact.

A TPE cable protects these connectors from oil, weld slag, and other tough industrial stresses as they send signal and power to low-current devices with M8 connections.

Power robotic arms and other high-amperage machines in motor controls, conveyors, and sorting and packaging systems from your main M35 power line.

Protect against signal interference while sending 2-3 times more current than M12 connectors.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment.

Ready to install in panel boxes, switches, outlets, and other devices, these cords come with a spade terminal already attached to one end.