Activate equipment from up to 40 feet away—these switches include a transmitter and a receiver that connects to equipment. The transmitter is rated IP68 and the receiver is rated IP01.

Operate equipment from up to 330 feet away—these switches include a transmitter and a receiver that connects to equipment. Use up to 45 wireless switches in the same area. They're rated IP65 for protection from washdowns.

Two-speed switches have staged contacts. For slow speed, press the button halfway down to close the first contact. For high speed, push it all the way to close the second contact.

Switches and replacement transmitters that cannot be sold to Canada are restricted by product labeling requirements.

Replace worn stickers or change the function of a button with labels. Packs include commonly used functions such as up, down, start, and stop.

To Order: For existing systems, please advise which channels are currently in use so that a different channel can be provided. For the replacement transmitter, please specify the serial number.

Never worry about your pendant switch losing power. These pendant switches generate enough power from pushing the button to send a signal to a receiver (sold separately) up to 330 feet away. Since they operate equipment without requiring wires back to your control panel, they’re often used for retrofit or temporary installations. Connect up to eight pendant switches to one receiver. The switches come in different colors to help operators quickly identify them.

For technical drawings and 3-D models, click on a part number.

Mount these switches under your desktop to keep your workspace clear and prevent accidental switching. They’re often used to control remote locking systems. Their enclosure is aluminum, so they resist corrosion and are lightweight and durable. The toggle stays in the position you flip it to.

For technical drawings and 3-D models, click on a part number.

Keep a switch within reach—but not in the way. These mount to the underside of desks, tables, and shelves to keep work surfaces clear and reduce the risk of accidental presses. They’re often used to remotely release electric locks. Made of aluminum, their housing is lightweight, durable, and corrosion resistant. The push-button design is ideal for uses requiring quick and simple actuation.

For technical drawings and 3-D models, click on a part number.

Mount these switches in panel cutouts where changing a battery or routing wires might be difficult—they power themselves when you push the button. These switches wirelessly send a signal to a receiver (sold separately) up to 330 feet away. Since they operate equipment without requiring wires back to your control panel, they’re often used for retrofit or temporary installations. The switches come in distinct colors to help operators quickly identify them.

Switches include enough contact blocks to control the number of circuits listed. Additional contact blocks (sold separately) can be added to control more circuits or replace the included contact block. Connect up to 32 contact blocks to one receiver.

For technical drawings and 3-D models, click on a part number.

Send a signal to turn equipment on and off from up to 150 feet away without having to run electrical wire. These relays have an enclosure to protect the terminals from dust and accidental bumps. They can be set to transmit, receive, or both at once. You’ll need at least two relays to switch a device. They have an alarm that can be set to check for certain conditions before transmitting a signal. For example, you could set these relays to send a signal to turn on an air conditioner if all windows are closed. The repeat function extends the transmitting signal through a maximum of two receiving relays.

Relays that are set to transmit can be linked up to as many receiving relays as you need. Relays set to receive can be linked up to 30 transmitting relays. All relays connect to dry contacts on your switch, sensor, or controller. Use the wire leads to connect them to a power source.

UL and C-UL listed, all meet American and Canadian safety standards. Rated NEMA 1, they should only be used indoors.

For technical drawings and 3-D models, click on a part number.

With a built-in web server, these relays can be remotely controlled over any IP network, including the Internet. They connect to your network either wirelessly or with an Ethernet cable (not included). No programming or software is required to operate these relays. Instead, use your web browser to input the relay’s IP address and the website guides you through simple menus and drop-down lists to set your parameters. Alternatively, you can use these relays with a PLC or without a computer at all if you use one relay as a controller for another relay.

Each circuit has a digital input that can be used to control the relay or a remote relay over the IP network. You could also use the digital input to monitor a separate device, such as a push-button or door alarm switch. These relays can be set to automatically restart network devices, such as computers, even when they fail to respond to relay signals. LED indicators let you know if there’s input and output voltage and if the network is connected and active. All meet at least one safety standard.

Mount these relays on 35 mm DIN rail (also known as DIN 3 rail) for fast installation. They also mount to flat surfaces.

Relays that control 2 circuits can also be programmed from a downloadable app or programs written in BASIC script, making them easy to customize. The website logs and stores data and device information.

Power over Ethernet (PoE) compatible relays can receive power from PoE cables (not included).

For technical drawings and 3-D models, click on a part number.

Replace existing transmitters or team a transmitter and a receiver (not included) to remotely operate your automatic overhead door openers.

Universal transmitters are compatible with Chamberlain, Craftsman, Genie, Liftmaster, Multicode, and Stanley openers. They can operate two door openers.

DIP-switch transmitters are compatible with Liftmaster openers that have a DIP-switch receiver. Use them to operate a single door. The three-button model has open, close, and stop functions.

Rolling-code transmitters are compatible with Liftmaster openers that have Security+ 2.0 technology, which sends a new code with each use. The three-button model can operate three door openers. The four-button model is like two remotes in one—it's designed to operate one gated entrance plus three door openers.

If you don't have your remote, you can still open and close automatic overhead doors with a private 4-digit PIN. Use these transmitters to operate one transmitter or receiver. The keypad is backlit for visibility in the dark.