A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.

A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.

An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.

Designed for high-purity processes, this tubing is made without plasticizers like DEHP that can contaminate the fluid passing through it.

Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.

Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.

Safely suction, transfer, and dispense drinking water.

Made of SBR rubber, this hose and its cover are tough enough to resist wear and tear.

Transfer and spray water at low pressures.

The blended rubber cover on this hose won't break down if exposed to oil, animal fats, or grease as you wash down equipment with hot water.

With fittings already attached, it’s easy to connect this hose to a washdown station and wash gun.

Lighter than standard EPDM water hose, this PVC/Buna-N hose connects to a male threaded fitting on one end and a female one on the other.

Made of high-purity PVC with 316 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.

Made of high-purity PVC with 303 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.

The steel wire reinforcement gives this hose extra strength in high-pressure conditions.

Power away dirt with this heavy duty rubber hose that's also known as pressure-washer hose.

Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.

Drain water from one place to another. Hose lays flat and folds up for carrying and storage.

Transport milk, syrup, meat, and other wet food and beverages through your line.

Blended with Buna-N, this hose remains flexible and won’t break down from oily or fatty food and beverages.

For easy access to lines that handle oily and fatty foods and beverages, this hose has flanged ends that join with quick-clamp fittings.

Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops.

Easily access lines that move highly alcoholic or acidic wet food and beverages—this hose has flanged ends that join with quick-clamp fittings.

Move flour, grain, rice, sugar, and other dry food through your line.

Made of polyurethane, this hose lasts more than twice as long as PVC hose when moving abrasive dry food. You can monitor your line since it's clear.

Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.

Move coolant around tight turns in crowded spaces. Made of silicone, these elbows withstand high temperatures up to 350° F.

Bend this hose in any direction and it won’t kink, even when routed through tight spaces.

Reinforced by aramid fabric, this silicone rubber hose handles higher temperatures than any other coolant hose we offer.

Step on this hose and it springs back to its original shape.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

Yarn reinforcement gives this hose good strength under pressure.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.

Use this durable, flexible hose in pressures up to 5,000 psi. Its braided construction gives it the highest pressure rating of any chemical hose in our offering.

The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.

Attach barbed fittings to this hose for use in low-pressure air applications.

Prevent electrostatic discharge (ESD) while moving compressed air in dry environments, such as when powder coating or spray painting.

Transfer compressed air that’s up to 500 psi—this hose has extra-strong yarn reinforcement for excellent durability.

Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F.

The rubber cover meets MSHA (Mine Safety and Health Administration) standards for flame resistance, so this hose is often used to transfer highly compressed air in robotic welding systems.

Identify your air lines by color.

Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.

Transfer fuel oil with a hose that stays flexible in subzero conditions.

Rated for low-pressure applications up to 500 psi, this hose works well as a return line in your hydraulic system.

Transfer fluid between pumps, cylinders, and other parts of your hydraulic system.

Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system. It comes with female threaded fittings already attached, so it’s ready to use right out of the box.

Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. It comes with female threaded fittings already attached, so it’s ready to use right out of the box.

Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. The fittings come attached, so this hose is ready to connect to a male threaded fitting on one end and a female one on the other.

For frequent connections, this hose has a socket end that's faster to connect and disconnect than a threaded fitting. Thanks to two layers of blended rubber, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.

The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose. It comes with female threaded fittings already attached, saving you time.

When you need access to your line, don’t waste time threading and unthreading your fittings. This hose has a quick-disconnect fitting on both ends. It bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.

With four steel wire spirals for reinforcement, this hose handles rapid changes in pressure and flow without bursting.

Internally reinforced with four steel wire spirals, this hose resists bursting from rapid changes in pressure and flow. To save you time, this hose comes with female threaded fittings already attached.

Connect to high-vacuum pumps to route exhaust fumes out of your work area. Also known as roughing hose.

Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment.