Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface. They have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. They cast a uniform beam, which is especially good for close-up tasks and inspection work. All are tested and rated to ANSI/NEMA FL 1 standards. Rated IP54, they protect against dust and liquid splashed from all angles. These penlights cannot be sold to the listed areas due to energy efficiency regulations.

The smooth stainless steel surface allows for easy cleaning. These flashlights have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. They cast a bull’s eye beam, where the center is brighter than the edges for long-distance illumination. Rated IP04, they withstand liquid splashed from all angles. All stainless steel flashlights were tested and rated to ANSI/NEMA FL 1 standards.

1000 lumens flashlight can operate on either the included rechargeable battery or on four standard AAA alkaline batteries. It has an adjustable beam that can change from a wide floodlight to a narrow spotlight with a slide focus for one-hand operation. This flashlight cannot be sold to Canada due to local energy efficiency requirements.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Plug in these flashlights and they’ll automatically light up when the power goes out. There’s no need to regularly replace the batteries—they recharge on the base when it’s plugged into an outlet. They have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. Good for close-up tasks and inspection work, these flashlights cast a flood beam to evenly distribute light. They have two modes: a flashlight on the top and a torchlight on the side.

Direct light where it’s needed with this pivoting-head flashlight. When plugged in, it will automatically light up if the power goes out. With long-lasting, built-in LEDs, this flashlight is more efficient and generates less heat than flashlights with other light technologies. It casts a bull’s eye beam pattern, which has a bright center that reaches long distances. This flashlight has a flat bottom, so you can work hands-free without it rolling away. It's IP04 rated, so it withstands liquid splashed from all angles. It cannot be sold to Canada due to energy efficiency requirements.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

For technical drawings and 3-D models, click on a part number.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away. With long-lasting, built-in LEDs, these flashlights are more efficient and generate less heat than flashlights with other light technologies. They cast a bull’s eye beam, which has a bright center that reaches long distances. Rated IP04, they withstand liquid splashed from all angles. They cannot be sold to Canada due to energy efficiency requirements.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

All of these flashlights stand up to wet environments. They have a slip-resistant grip to ensure a secure hold.

IP04 flashlights withstand liquid splashed from all angles.

IP07 flashlights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes.

LED flashlights last longer, are more efficient, and generate less heat than krypton flashlights.

Styles A-E were tested and rated to ANSI/NEMA FL 1 standards.

CE marked flashlights meet European health, safety, and environmental protection requirements.

Style C switch between red and white light beams with a twist of their head; the red beam is particularly effective when it’s dark out. They also work with non-rechargeable batteries (not included).

Style D have a detachable power bank with a USB connection for charging small devices, such as phones. When they’re separated, cover the exposed ends of the bank and flashlight with the included caps. These flashlights are dimmable, and they revert to their most recent brightness setting when you turn them on.

Rated for use in environments where hazardous material is present. These flashlights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies.

Flashlights with a bull’s eye beam have a bright center for long-distance illumination.

Style F can operate on either the included rechargeable batteries or standard AA alkaline batteries.

Flashlights that cannot be sold to the regions listed are restricted by local energy efficiency regulations.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. These flashlights are rated for use in environments where hazardous material is present. They’re also rated IP04 to withstand liquid splashed from all angles. With long-lasting, built-in LEDs, these flashlights are more efficient and generate less heat than flashlights with other light technologies. They cast a uniform beam that is especially good for close-up tasks and inspection work. Use the mounting magnet, clip, or retractable hook when you need to keep your hands free for work.

Rechargeable flashlight comes with a 120-volt AC charger that includes a 12-volt DC charging cord. This flashlight cannot be sold to Canada due to local energy efficiency regulations.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Free your hands for other work by mounting a flashlight to a nearby surface. Flashlights are sold separately.

Securely store your flashlight when not in use.

Attach mini and full-size flashlights to a hard hat and keep your hands free for work. Mount the clip to the brim or insert it into the slot on the side of a hard hat.

Keep your hands free by wearing a flashlight on your head. These headlamps have long-lasting, built-in LEDs that produce more light and generate less heat than other light technologies. An included strap secures the lamp to your head and adjusts for a comfortable fit.

Headlamps with a uniform beam are especially good for close-up tasks and inspection work. Headlamps with a bull's eye beam have a bright center that can reach long distances.

IP54 rated headlamps protect against dust and liquid splashed from all angles.

Headlamps that cannot be sold to Canada are restricted by local energy efficiency requirements.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Bring light to areas that don't have electrical power service. This light has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a neutral white light that's often found in workspaces. This light has an impact-resistant plastic lens to protect the LEDs.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They have an impact-resistant plastic lens to protect the LEDs.