Filter by
Reamer Diameter
Reamer Type
Shank Type
Flute Length
Rate of Taper
Overall Length
Spiral Direction
Square Shank Size
Material
Sold As
Export Control Classification Number (ECCN)
DFARS Specialty Metals
REACH
RoHS
Reamers
Finish holes to precise inch, metric, wire gauge, or letter sizes with these reamers.
Square Shank
![]() |
Spiral Flute |
Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.
Lg., mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Reamer Dia. | Material | Square Shank Size, mm | Flute | Overall | No. of Flutes | Spiral Direction | Cutting Dia. Tolerance, mm | Specs. Met | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Spiral Flute | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Metric | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2.0000 mm | High-Speed Steel | 1.6 | 25 | 50 | 4 | Left Hand | 0.004 to 0.008 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2.5000 mm | High-Speed Steel | 2.1 | 29 | 58 | 4 | Left Hand | 0.004 to 0.008 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3.0000 mm | High-Speed Steel | 2.4 | 31 | 62 | 6 | Left Hand | 0.004 to 0.008 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4.0000 mm | High-Speed Steel | 3 | 38 | 76 | 6 | Left Hand | 0.005 to 0.01 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5.0000 mm | High-Speed Steel | 3.8 | 44 | 87 | 6 | Left Hand | 0.005 to 0.01 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5.5000 mm | High-Speed Steel | 4.3 | 47 | 93 | 6 | Left Hand | 0.005 to 0.01 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6.0000 mm | High-Speed Steel | 4.9 | 47 | 93 | 6 | Left Hand | 0.005 to 0.01 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6.5000 mm | High-Speed Steel | 4.9 | 50 | 100 | 6 | Left Hand | 0.006 to 0.012 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
7.0000 mm | High-Speed Steel | 5.5 | 54 | 107 | 6 | Left Hand | 0.006 to 0.012 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8.0000 mm | High-Speed Steel | 6.2 | 58 | 115 | 6 | Left Hand | 0.006 to 0.012 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
9.0000 mm | High-Speed Steel | 7 | 62 | 124 | 6 | Left Hand | 0.006 to 0.012 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10.0000 mm | High-Speed Steel | 8 | 66 | 133 | 6 | Left Hand | 0.006 to 0.012 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
11.0000 mm | High-Speed Steel | 9 | 71 | 142 | 6 | Left Hand | 0.008 to 0.015 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12.0000 mm | High-Speed Steel | 9 | 76 | 152 | 6 | Left Hand | 0.008 to 0.015 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
13.0000 mm | High-Speed Steel | 9 | 76 | 152 | 6 | Left Hand | 0.008 to 0.015 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
14.0000 mm | High-Speed Steel | 11 | 81 | 163 | 8 | Left Hand | 0.008 to 0.015 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
15.0000 mm | High-Speed Steel | 12 | 81 | 163 | 8 | Left Hand | 0.008 to 0.015 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16.0000 mm | High-Speed Steel | 12 | 87 | 175 | 8 | Left Hand | 0.008 to 0.015 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
17.0000 mm | High-Speed Steel | 13 | 87 | 175 | 8 | Left Hand | 0.008 to 0.015 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18.0000 mm | High-Speed Steel | 14.5 | 93 | 188 | 8 | Left Hand | 0.008 to 0.015 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20.0000 mm | High-Speed Steel | 16 | 100 | 201 | 8 | Left Hand | 0.009 to 0.017 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
22.0000 mm | High-Speed Steel | 18 | 107 | 215 | 8 | Left Hand | 0.009 to 0.017 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25.0000 mm | High-Speed Steel | 20 | 115 | 231 | 8 | Left Hand | 0.009 to 0.017 | DIN 206 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Reamers for Taper-Pin Holes
Shape holes to match the profile of taper pins. After drilling a hole that matches the size of the small end of the taper pin you want to install, use these reamers to taper and finish the hole.
Square Shank
![]() |
Straight Flute |
Turn these reamers by hand with an adjustable wrench, straight-handle tap wrench, or pin vise (sold separately).
Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
Lg., mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Taper Pin No. | Reamer Dia. (A), mm | Reamer Dia. (B), mm | Material | Square Shank Size, mm | Flute | Overall | No. of Flutes | Cutting Dia. Tolerance, mm | Rate of Taper | For Use On | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Straight Flute | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Metric | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 mm | 2.8600 | 1.9000 | High-Speed Steel | 2.2 | 48 | 68 | 4 | 0 to 0.075 | 1:50 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2.5 mm | 3.3600 | 2.4000 | High-Speed Steel | 2.8 | 48 | 68 | 4 | 0 to 0.075 | 1:50 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 mm | 4.0600 | 2.9000 | High-Speed Steel | 3.2 | 58 | 80 | 4 | 0 to 0.075 | 1:50 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 mm | 5.2600 | 3.9000 | High-Speed Steel | 4.0 | 68 | 93 | 4 | 0 to 0.075 | 1:50 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 mm | 6.3600 | 4.9000 | High-Speed Steel | 5.0 | 73 | 100 | 4 | 0 to 0.075 | 1:50 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 mm | 8.0000 | 5.9000 | High-Speed Steel | 6.3 | 105 | 135 | 6 | 0 to 0.125 | 1:50 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8 mm | 10.8000 | 7.9000 | High-Speed Steel | 8.0 | 145 | 180 | 6 | 0 to 0.125 | 1:50 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 mm | 13.4000 | 9.9000 | High-Speed Steel | 10.0 | 175 | 215 | 6 | 0 to 0.125 | 1:50 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 mm | 16.0000 | 11.8000 | High-Speed Steel | 11.2 | 210 | 255 | 8 | 0 to 0.125 | 1:50 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
13 mm | 16.7400 | 12.8600 | High-Speed Steel | 12.5 | 210 | 255 | 8 | 0 to 0.125 | 1:50 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 mm | 20.4000 | 15.8000 | High-Speed Steel | 14.0 | 230 | 280 | 8 | 0 to 0.125 | 1:50 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 mm | 24.8000 | 19.8000 | High-Speed Steel | 18.0 | 250 | 310 | 8 | 0 to 0.125 | 1:50 | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||