Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Hold fasteners securely in place as you drive them.

Designed for use with stainless steel fasteners, these sockets are more corrosion resistant than steel sockets and less likely to flake.

Slide the open side of these sockets over a tube or hose to adjust a nut that’s already installed.

Pivot the head to access fasteners from an angle.

Turn multiple shapes and sizes of fasteners with a single socket.

The short bit on these sockets fits in spaces where height clearance is limited.

When vertical space is tight or you need an extra twist on your socket, use these dual drive hex bit sockets. They work with a standard square drive tool and a box or open end wrench.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

These sockets are also known as pin-in-hex or pin-in-socket bits.

A magnet holds the fastener securely enough to drive self-tapping screws.

Pivot the head to access fasteners from an angle.

The 12-point shape quickly positions on hex fasteners.

These sockets are made to withstand the high torque and force of impact tools.

The short bit on these sockets fits in spaces where height clearance is limited.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

Suitable for occasional maintenance work, these sets are imported.

The sockets in these sets have a cutout and extra length so you can reach and twist nuts without having to disconnect your line.

With more than double the clearance of standard sockets, the sockets in these sets access nuts on extra-long bolts.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

The short bit on these sockets fits in spaces where height clearance is limited.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

Get a strong grip in tight areas, even on fasteners that are rounded or damaged.

Grip more of your fastener head with these wrench heads.

Pivot the head to access fasteners from an angle.

Use one socket to switch between two fastener sizes.

Extra-long bits help you access hard-to-reach fasteners.

Remove and install dual wheels on trucks and trailers with the sockets in these sets.

A lever reverses the ratchet direction.

Flip these wrenches over to ratchet in the opposite direction.

A spline-shaped box end turns spline, hex, and 12-point fasteners. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench.

Suitable for occasional maintenance work, these sets are imported.

Pivot the box end for access to fasteners in tight spots.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

A spline-shaped box end turns spline, hex, and 12-point fasteners. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench.

Ratchet mechanisms allow you to turn fasteners in tight spaces without removing and repositioning the tool.

The offset head gives you additional clearance to turn hard-to-reach fasteners.

The heads are offset to provide clearance for reaching over obstructions.

Pivot the socket end to access hard-to-reach fasteners.