We will reply to your message within an hour.
A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.
The handle is covered in rubber for a comfortable grip.
No need to pull the socket off the tool—push a button to release.
A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.
The shaft on these wrenches extends and locks.
Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.
Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.
Pivot the head to access fasteners in tight spots.
The 20° offset head provides clearance when reaching over obstructions.
Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.
Turn sockets in the most confined spaces.
Pivot the head for access to fasteners in tight spots.
A rubber coating provides a comfortable grip.
Position the head anywhere along the handle.
Turn sockets from above when there's not room to swing a standard wrench handle.
Fasten quickly with these crank-style handles.
Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.
Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.
Measure with an accuracy of ±2%.
The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.
These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.
When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.
Also known as impact drivers, use these tools with impact sockets to break frozen bolts and screws free. Strike with a hammer to tighten and loosen fasteners.
Use these tools for general shop applications.
Built for durability, these wrenches handle the demands of high-volume production and tough maintenance applications.
These tools are suitable for general shop, maintenance, and automotive work.
Use these wrenches for medium-volume production, general maintenance, and construction applications.
Use these wrenches with impact sockets only.
These short sockets fit spaces where height clearance is limited.
Pivot the head to access fasteners from an angle.
Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.
Quickly position these sockets on square and external 8-point fasteners.
For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.
Also known as pipe plug sockets, these sockets have a square shape that provides the best possible grip on square fasteners and prevents rounding.
Grip the indentations around the outside of tri-groove fasteners.
Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.
Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.
These sockets fit the nuts found on water and gas valves.
Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.
The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.
Extra-long bits allow access to hard-to-reach fasteners.
The short bit on these sockets fits in spaces where height clearance is limited.
Tighten and loosen fasteners at an angle by pivoting the head on these sockets.
The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.
These sockets are also known as pin-in-Torx bits.
The short Phillips bit on these sockets fits in spaces that screwdrivers can’t and where height clearance is limited.
These sockets are also known as pin-in-hex or pin-in-socket bits.
The opening is designed to grip threaded rod for quick installation and removal without damaging the threads.
A rubber insert grips the plug to prevent damage.
Achieve the best possible grip on hex fasteners and prevent rounding.
A magnet holds the fastener securely enough to drive self-tapping screws.
Extra length allows access to fasteners on long bolts.
With a smaller OD than standard sockets, these fit between tightly spaced fasteners.
Quickly position these sockets on square fasteners.
The hex shape grips hex fasteners and prevents rounding.
Use bit sockets as an alternative to a screwdriver or L-key.
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.
Suitable for occasional maintenance work, these sets are imported.
For high quality at a lower price, choose these U.S.A.-made sets.
With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.
Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.
Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.
Convert from one square drive size to another.
Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.
The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.
These sockets are made to withstand the high torque and force of impact tools.
Extend your socket's reach.
Safely extend your reach in areas where you could accidentally come into contact with live circuits.
Keep common extension lengths on hand to reach a variety of spots—just attach them to your socket.
Reach a variety of spots with the confidence that your extension won’t disengage.
Bend these extensions to reach inconveniently located fasteners. These sets include multiple extension lengths, so you can find the right length to reach around obstructions.
Tighten and loosen fasteners in hard-to-reach spots with a variety of extensions that lengthen the reach of your socket.
Bend these socket extensions around obstructions to turn hard-to-reach fasteners.
The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.
Lock your socket into these extensions to prevent accidental disengagement.
Push the square drive through the adapter to change size.
These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.
A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.
Set a desired torque within the range.
Adapters are set to a specific torque and cannot be adjusted.
Change a standard wrench handle into a ratcheting wrench.
Fit these adapters between your wrench and socket to enable finger tightening.
Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.
Attach to your socket for a longer reach.
Lock your socket into the extension to prevent accidental disengagement.
Also known as positive-locking extensions, these extensions hold sockets place with a ball that only retracts when you pull the collar down. Designed to prevent accidental detachment, they lock to your socket more securely than other extensions.
Reach a variety of spots by keeping common extension lengths on hand.
Bend these extensions around obstructions to access hard-to-reach fasteners.
Use sockets with tools that accept hex shanks, such as drills and powered screwdrivers.
First developed for aerospace and automotive assembly processes, these extensions will stand up to your high-volume production and assembly lines.
Change heads to use these tools as an open-end, box, square drive, or hex-key wrench.
Use your ratchet wrench as a handle to reach filters and other round objects in tight spots.
Break stuck screws free using screwdriver bits. Strike the end of the handle with a hammer to turn the bit and tighten or loosen fasteners.
Attach these adapters to square-drive tools.
Lock your bit into the adapter to prevent accidental disengagement. These adapters attach to square-drive tools.