We will reply to your message within an hour.
A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.
No need to pull the socket off the tool—push a button to release.
A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.
Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.
Pivot the head to access fasteners in tight spots.
Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.
Turn sockets in the most confined spaces.
Pivot the head for access to fasteners in tight spots.
Position the head anywhere along the handle.
Bend around obstructions to turn hard-to-reach fasteners.
The ratcheting mechanism turns sockets quickly.
Turn sockets from above when there's not room to swing a standard wrench handle.
Fasten quickly with these crank-style handles.
Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.
Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.
Measure with an accuracy of ±2%.
The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.
When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.
Use these tools for general shop applications.
Built for durability, these wrenches handle the demands of high-volume production and tough maintenance applications.
These tools are suitable for general shop, maintenance, and automotive work.
Pivot the head to access fasteners from an angle.
Quickly position these sockets on square and external 8-point fasteners.
Grip the indentations around the outside of tri-groove fasteners.
Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.
Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.
Extra-long bits allow access to hard-to-reach fasteners.
The short bit on these sockets fits in spaces where height clearance is limited.
Tighten and loosen fasteners at an angle by pivoting the head on these sockets.
The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.
These sockets are also known as Robertson bits.
These sockets are also known as pin-in-Torx bits.
The short Phillips bit on these sockets fits in spaces that screwdrivers can’t and where height clearance is limited.
Achieve the best possible grip on hex fasteners and prevent rounding.
A magnet holds the fastener securely enough to drive self-tapping screws.
The hex shape grips hex fasteners and prevents rounding.
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.
Suitable for occasional maintenance work, these sets are imported.
With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.
Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.
Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.
Convert from one square drive size to another.
Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.
The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.
These sockets are made to withstand the high torque and force of impact tools.
Extend your socket's reach.
Keep common extension lengths on hand to reach a variety of spots—just attach them to your socket.
Reach a variety of spots with the confidence that your extension won’t disengage.
Bend these extensions to reach inconveniently located fasteners. These sets include multiple extension lengths, so you can find the right length to reach around obstructions.
Tighten and loosen fasteners in hard-to-reach spots with a variety of extensions that lengthen the reach of your socket.
Bend these socket extensions around obstructions to turn hard-to-reach fasteners.
The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.
Lock your socket into these extensions to prevent accidental disengagement.
These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.
Turn sockets with a bit screwdriver.
Fit these adapters between your wrench and socket to enable finger tightening.
Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.
Attach to your socket for a longer reach.
Reach a variety of spots by keeping common extension lengths on hand.
Use sockets with tools that accept hex shanks, such as drills and powered screwdrivers.
First developed for aerospace and automotive assembly processes, these extensions will stand up to your high-volume production and assembly lines.
Change heads to use these tools as an open-end, box, square drive, or hex-key wrench.
Attach these adapters to square-drive tools.
Lock your bit into the adapter to prevent accidental disengagement. These adapters attach to square-drive tools.
Attach a socket to the 1/4" square drive tip. These tools have a dial that shows how torque measurements change as you turn the driver. Use to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.