Convert from one square drive size to another.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Turn sockets with a bit screwdriver.

Insulated to protect against accidental contact with live electrical circuits, these adapters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505 standards.

Change a standard wrench handle into a ratcheting wrench.

Safely lengthen the reach of your socket while working near flammable vapors and combustible residue.

Bend these extensions to reach inconveniently located fasteners. These sets include multiple extension lengths, so you can find the right length to reach around obstructions.

Keep common extension lengths on hand to reach a variety of spots—just attach them to your socket.

The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.

Lock your socket into these extensions to prevent accidental disengagement.

Convert your socket into a flex socket to access fasteners from an angle.

Convert your socket into a flex socket without worrying about the adapter falling off.

Set a desired torque within the range.

Attach one of these adapters to a ratcheting box wrench to convert it to a ratcheting socket wrench.

Convert from one square drive size to another.

Convert your impact socket into a flex socket to access fasteners from an angle.

Lock your socket into the extension to prevent accidental disengagement.

Attach your impact square-drive sockets to power drills, impact drivers, and other tools that accept a hex shank.

Attach your square-drive impact socket to a spline-drive impact wrench.

Reach a variety of spots by keeping common extension lengths on hand.

Convert your impact socket into a flex socket to access fasteners from an angle.

These adapters, which convert from one square drive size to another, were designed to tolerate continuous use with impact tools in high-volume production and assembly.

Use these adapters to connect sockets to impact wrenches and other power tools—they’re designed to tolerate continuous use in high-volume production and assembly.

The hex shape achieves the best possible grip on hex fasteners to prevent rounding their points.

These short sockets fit spaces where height clearance is limited.

Designed for use with stainless steel fasteners, these sockets are more corrosion resistant than steel sockets and less likely to flake.

Hold fasteners securely in place as you drive them.

Slide the open side of these sockets over a tube or hose to adjust a nut that’s already installed.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.

Quickly position these sockets on square and external 8-point fasteners.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.

Slip these slotted sockets onto wing nuts to tighten or loosen them with more force than fingers can apply.

Tighten and loosen fasteners with an external Torx drive.

Attach one of these heads to your square-drive ratchet or torque wrench to extend its reach or to access spaces with limited vertical clearance.

Tighten and loosen fasteners at an angle by pivoting the head on these sockets.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

The short Phillips bit on these sockets fits in spaces that screwdrivers can’t and where height clearance is limited.

These sockets are also known as Robertson bits.

An opening at the tip of these sockets fits around the security pin, allowing you to drive tamper-resistant Torx Plus screws.

A rubber insert grips the plug to prevent damage.

The square shape provides the best possible grip on square fasteners and prevents rounding.

A magnet holds the fastener securely enough to drive self-tapping screws.

With a smaller OD than standard sockets, these fit between tightly spaced fasteners.

Extra length allows access to fasteners on long bolts.

Pivot the head to access fasteners from an angle.

Quickly position these sockets on square fasteners.

Extra length allows access to fasteners on long bolts.

The slotted shape of these sockets fits over wing nuts to tighten and loosen them with more force than you can by hand.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These sockets are made to withstand the high torque and force of impact tools.

The short bit on these sockets fits in spaces where height clearance is limited.

These sockets fasten Torx screws often used in vehicles, bicycles, and electronics.

A magnet holds the fastener securely enough to drive self-tapping screws.

Pivot the head of the sockets in these sets to access fasteners from an angle.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

Keep a convenient variety of drive styles and sizes of bit sockets on hand.

When vertical space is tight or you need an extra twist on your socket, use one of the dual-drive Phillips bit sockets in this set.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

Attach one of the heads in these sets to a torque wrench for more leverage to loosen a stubborn fastener.

Reach nuts obstructed by a fluid line or other barrier with the wrench heads in these sets.

Pair the sockets in these sets with the bolt-through ratchet wrench to reach nuts at the bottom of a long threaded rod or bolt.

Pivot the head to access fasteners from an angle.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

The sockets in these sets have a cutout and extra length so you can reach and twist nuts without having to disconnect your line.

These sets organize what you need when working around live electrical circuits.

Suitable for occasional maintenance work, these sets are imported.

Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.

With twice as many corners, 8-point sockets grab onto square-drive screws and nuts more quickly than 4-point sockets.

With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.

Convert from one square drive size to another.

Carry fewer impact sockets—these five reversible impact sockets turn 10 fastener sizes. Flip the socket around to turn a different size.

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

Turn square-drive fasteners in several sizes with these socket sets.

Extra-long bits help you access hard-to-reach fasteners.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Remove and install dual wheels on trucks and trailers with the sockets in these sets.

Convert your standard 6-point sockets into hex bit sockets with these bits.

The 20° offset head provides clearance when reaching over obstructions.

Pivot the head to access fasteners in tight spots.

Pair these wrenches with a bolt-through socket to reach nuts at the bottom of a long threaded rod or bolt which can pass through the head of the wrench.

No need to pull the socket off the tool—push a button to release.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.

Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

Use these tools for general shop applications.