Ratchet Jacks
These jacks can be used to lift, spread, push, pull, and clamp. The ratcheting action raises or lowers the load one notch at a time. For clamping, turn the top plate 90° and ratchet the jack to secure your workpiece.
Note: Jacks must be loaded with at least 150 lbs. to safely lower your load one notch at a time. When loaded with less than 150 lbs., the notches are bypassed and the load will drop freely.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Base | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max., tons | Range, lbs. | Max. Clamping Force, lbs. | Ht. | Max. Lift | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Handle Material | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1 1/4 | 150-2,500 | 750 | 4 1/2"-49 3/4" | 45 1/4" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 0000000 |
| 2 1/4 | 150-4,500 | 750 | 4 1/2"-38 5/8" | 34 1/8" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 000000 |
Two-Height Ratchet Jacks
Choose between two lifting points—use the toe for lifting loads low to the ground, or use the saddle when you need a higher, more stable lifting point. The saddle is curved to cradle curved loads. Jacks have a ratcheting action that raises or lowers the load one notch at a time. A removable handle can be used at two different positions to get the best angle for lifting.
Aluminum jacks are lighter than iron for easier portability.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Max. Lift | Ht. | Lg. | Wd. | Ht. | Movement | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Handle Material | Each | |
Iron | |||||||||||||||
| 5 | 10,000 | 7" | 1 3/4"-8 3/4" | 2 1/2" | 1 1/8" | 14"-21" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 0000000 |
| 5 | 10,000 | 10" | 1 3/4"-11 3/4" | 2 1/2" | 1 1/8" | 17"-27" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
| 5 | 10,000 | 13" | 1 3/4"-14 3/4" | 2 1/2" | 1 1/8" | 20"-33" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
| 10 | 20,000 | 9 1/2" | 1 5/8"-11 1/8" | 2 3/8" | 1 1/8" | 17 1/4"-26 3/4" | Rigid | 2 5/8" | 2 7/8" | 8 3/4" | 6" | 60" | Steel | 0000000 | 00000000 |
| 10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21 5/8"-33 5/8" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
| 15 | 30,000 | 12 3/4" | 2 1/4"-15" | 2 5/8" | 2 1/4" | 23 1/4"-36" | Rigid | 2 7/8" | 3 1/2" | 10 1/4" | 8" | 70" | Steel | 0000000 | 00000000 |
| 15 | 30,000 | 18" | 2 1/4"-20 1/4" | 2 5/8" | 2 1/4" | 28"-46" | Rigid | 2 7/8" | 3 1/2" | 11" | 8" | 70" | Steel | 0000000 | 00000000 |
Aluminum  | |||||||||||||||
| 10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21 5/8"-33 5/8" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |