The ratchet applies the correct pressure to ensure a complete crimp every time when attaching pin-and-sleeve contacts in connectors. Use a screwdriver to change dies.

The ratchet applies the correct pressure to ensure a complete four-point crimp every time to adhere to strict MIL-C-22520/1 standards. Use these crimpers to attach open- and closed-barrel pin-and-sleeve contacts in connectors. Turn the knob to select the crimp depth for your specific wire gauge size.

The ratchet in these crimpers applies the right amount of pressure to ensure a complete crimp in wire ferrules every time.

Crimpers with a fixed crimping slot have separate slots for each wire gauge.

Crimpers with a self-adjusting crimping slot automatically adjust to the proper crimp size for each wire gauge.

The ratchet on these tools applies the right amount of pressure to make sure the crimp is complete every time. Since you insert the wire ferrule from the front, they're useful in tight spaces. They automatically adjust to the proper crimp size for different wire ferrules.

The ratchet applies the correct pressure to ensure a complete crimp every time. The dies are built into the rotating head.

Crimpers with color-coded dies are colored to show you which die to use when attaching connectors to electrical wire.

Crimpers with a reference chart also work with 8- to 4/0-gauge battery terminals and heavy duty power lugs (you must use comparable battery terminal settings). Their reference chart shows you which die to use when attaching connectors to wire.

The ratchet applies the correct pressure to ensure a complete crimp every time.

Select the appropriate crimper by multiplying the outside diameter of your coaxial connector’s ferrule by 0.87 and choosing the crimper with the closest matching cavity size.