We will reply to your message within an hour.
Also known as spiral-wound gaskets, these have a carbon steel outer ring and a 304 stainless steel inner sealing element with a graphite-based filler.
Instead of bolt holes, these gaskets have tines that easily fit around flange bolts to ensure they’re properly aligned with pipe openings. The tine design also means you won’t have to retorque the flange for alignment, saving time.
These gaskets have a carbon steel outer ring and a 304 stainless steel inside sealing element with a PTFE filler that’s virtually chemically inert. They're also known as spiral-wound gaskets.
A space between the outer ring and the sealing element prevents the element from being squeezed inward and contaminating the process line.
Made of 110 copper, these gaskets handle steam applications up to 600° F. They are electrically conductive and resist water, Freon, and fuel oil.
In addition to withstanding temperatures up to 450° F, these silicone rubber gaskets resist water and salts.
These blended carbon/Buna-N rubber gaskets are unaffected by oil and temperatures up to 650° F.
Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.
These gaskets are made from a blend of graphite and Buna-N rubber to withstand temperatures up to 650° F.
Our highest-temperature gaskets, these are made of vermiculite to withstand temperatures up to 1800° F.
Also resistant to salt water.
Aramid fibers and SBR rubber are blended for resistance to water, inert gases, and abrasion.
The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.
These neoprene gaskets also resist salts.
In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.
Furnished with enough nuts and bolts to create a connection between two steel pipe flanges.
These compressible Buna-N rubber gaskets ensure a tight seal. They also resist water and salts.
These soft expanded PTFE gaskets are made of FDA-listed material for use with food and beverage.
Also known as Gore GR.
Often used with fiberglass flanges where you want to avoid overtightening, these gaskets seal under low torque. They’re made of soft, expanded PTFE that is also known as Gore UPG.
Made of soft expanded PTFE, these gaskets are reinforced with a stainless steel insert for added strength. They can hold their shape better than gaskets without an insert.
These pure PTFE gaskets have a slippery surface that prevents sticking.
A stainless steel insert in these PTFE gaskets adds strength and makes them reusable.
Reinforced with fiberglass filler for strength, these PTFE gaskets won't thin out when compressed.
Resistant to boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.
Also resist aliphatic hydrocarbons, such as ethylene.
Resist boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.
Also known as Hochdruck, these graphite gaskets have stainless steel layers for added strength in hot environments.
Made of soft expanded PTFE, these gaskets are virtually chemically inert.